How do I edit my pup_save.3fs file?
- Runemaster
- Posts: 180
- Joined: Sat 05 Aug 2006, 04:41
- Location: Albany, GA U.S.
How do I edit my pup_save.3fs file?
I am currently running from cd only with a dinky little 32meg save and my other pup save won't boot. I think I misspelled something in the rc.local file trying to get my wireless card to work. at boot up it just stops at: cannot remove *text that I misspelled* and then It just stops and thats it. So if there is some way I could open up my save file kind of like you do with the program exploref2s except exploref2s can't write to it. If I couls just get into my save file and edit my rc.local file I would be back in business. any help would be very much appreciated!
- Attachments
-
- INFO.png
- (7.15 KiB) Downloaded 1183 times
Adventurer: I seek knowledge and strength.
Seer:Knowledge comes from experience.....Strength comes from battleaxes.
Seer:Knowledge comes from experience.....Strength comes from battleaxes.
mount the sfs file and thenyou shd be able to treat it like any other set of files
in rxvt tr
mount -o loop /mnt/XXX/pup_save.3fs /mnt/data
where the XXX is whatever mount point the hardware you have it on is mounted
then all its contents are visible and can be manipulated
example
my backup pup_save.3fs is on my second usb drive so I use MUT to mount the usb stick then do
mount -o loop /mnt/sdb1/backup/pup_save.3fs /mnt/data
george
in rxvt tr
mount -o loop /mnt/XXX/pup_save.3fs /mnt/data
where the XXX is whatever mount point the hardware you have it on is mounted
then all its contents are visible and can be manipulated
example
my backup pup_save.3fs is on my second usb drive so I use MUT to mount the usb stick then do
mount -o loop /mnt/sdb1/backup/pup_save.3fs /mnt/data
george
george
type:
mount -o loop /initrd/mnt/dev_save/pup_save.3fs /mnt/data
(all one line)
your files are in /mnt/data
when you are finished, type:
umount /mnt/data
that's umount, not unmount
but first, the save file seems to have been damaged
do not mount it, and type:
fsck.ext3 -vf /initrd/mnt/dev_save/pup_save.3fs
fsck = File System ChecK
(like scandisk)
mount -o loop /initrd/mnt/dev_save/pup_save.3fs /mnt/data
(all one line)
your files are in /mnt/data
when you are finished, type:
umount /mnt/data
that's umount, not unmount
but first, the save file seems to have been damaged
do not mount it, and type:
fsck.ext3 -vf /initrd/mnt/dev_save/pup_save.3fs
fsck = File System ChecK
(like scandisk)
- Runemaster
- Posts: 180
- Joined: Sat 05 Aug 2006, 04:41
- Location: Albany, GA U.S.
Results:
sh-3.1# mount -o loop /initrd/mnt/dev_save/pup_save.3fs/mnt/data
Can't find /initrd/mnt/dev_save/pup_save.3fs/mnt/data in /etc/fstab
I looked at fstab and thought about typing something in but I said to myself that I'd probably screw that up too. so what now???(just to let you know I'm an advanced user, I am not a novice, BUT nor am I an expert, you guys may not be either but you know more than I do so to me you're experts.) I've spent an entire 2 months hacking away in the console trying to get my wifi card to start up at boot. But I went and screwed up, most likely by something that I misspelled. So all your help is very much appreciated as you are helping me revive over 2 months of my progress. I would be pretty mad If I had to start over, but not at you guys, but at myself, I'm going to start to save my pup_save from now on and if I have troubles I can go into windows and use it to replace the damaged one.
sh-3.1# mount -o loop /initrd/mnt/dev_save/pup_save.3fs/mnt/data
Can't find /initrd/mnt/dev_save/pup_save.3fs/mnt/data in /etc/fstab
I looked at fstab and thought about typing something in but I said to myself that I'd probably screw that up too. so what now???(just to let you know I'm an advanced user, I am not a novice, BUT nor am I an expert, you guys may not be either but you know more than I do so to me you're experts.) I've spent an entire 2 months hacking away in the console trying to get my wifi card to start up at boot. But I went and screwed up, most likely by something that I misspelled. So all your help is very much appreciated as you are helping me revive over 2 months of my progress. I would be pretty mad If I had to start over, but not at you guys, but at myself, I'm going to start to save my pup_save from now on and if I have troubles I can go into windows and use it to replace the damaged one.
Adventurer: I seek knowledge and strength.
Seer:Knowledge comes from experience.....Strength comes from battleaxes.
Seer:Knowledge comes from experience.....Strength comes from battleaxes.
- Runemaster
- Posts: 180
- Joined: Sat 05 Aug 2006, 04:41
- Location: Albany, GA U.S.
Crap!!!
Well you guys, looks like I'm gonna have to start from scratch again, but actually I don't mind. In the other one I had a bunch of crap compiled that I hardly used so I'm cool. but thanx for your help guys. I'll remember the command for the commandline though for future use But if any of you could help my with my other topic about my wifi card that would be cool too
Adventurer: I seek knowledge and strength.
Seer:Knowledge comes from experience.....Strength comes from battleaxes.
Seer:Knowledge comes from experience.....Strength comes from battleaxes.
An idea...
Where the file with the error is concerned - have you tried booting up in RAM only and then opening it in a text editor? Mount the drive in MUT, open the file with Beaver or the like. If you have any idea where the error is or when it started you might be able to find and correct it that way.
Always give without remembering - always receive without forgetting.
Alice
Alice
- Runemaster
- Posts: 180
- Joined: Sat 05 Aug 2006, 04:41
- Location: Albany, GA U.S.
It doesen't matter now, because some how it got deleted, but I don't care, I had a bunch of crap compiled that I didnt even use anyways, right now I'm using 3 or 4 incomplete pcs to make my own and load puppy on to that (I've got it made, Ijust can't figure out why the fan on the processor or anyhting else on the motherboard isen't working. It will power up and all devices work except it seems likw the motherboard isent getting power, I've got it plugged in and I don't know, oh well I'll figure it out in the morning, I'm tired.) see you guys later!
Adventurer: I seek knowledge and strength.
Seer:Knowledge comes from experience.....Strength comes from battleaxes.
Seer:Knowledge comes from experience.....Strength comes from battleaxes.
unable to browse, anymore ... ?
hi and maybe someone here can help me.
i have puppy ver 2.01 and ver 2.00 and ver 1.04.
somehow, i messed up something on the ver 2s such
that i no longer can use the seamonkey/mozilla or the opera browsers.
i can get sign onto my isp (bellsouth), okay, but i get
the password reset screen from bellsouth and it says that
i must use internet explorer in order to reset the password.
i called bellsouth support, but they do not support linux, so i
tried version 1.04 and it works fine (moilla), but when i go back to the ver 2s, the problem is still there.
is there some kind of way that i can restore the version 2 save file,
so that it thinks that
i am doing an initial run (setup), again, huh?
also, as an afterthought, can i go into windows and locate the
pup save 3fs and pup 200 3fs files, delete them, will that work, in making [him]
think that i am installing anew, huh?
i have puppy ver 2.01 and ver 2.00 and ver 1.04.
somehow, i messed up something on the ver 2s such
that i no longer can use the seamonkey/mozilla or the opera browsers.
i can get sign onto my isp (bellsouth), okay, but i get
the password reset screen from bellsouth and it says that
i must use internet explorer in order to reset the password.
i called bellsouth support, but they do not support linux, so i
tried version 1.04 and it works fine (moilla), but when i go back to the ver 2s, the problem is still there.
is there some kind of way that i can restore the version 2 save file,
so that it thinks that
i am doing an initial run (setup), again, huh?
also, as an afterthought, can i go into windows and locate the
pup save 3fs and pup 200 3fs files, delete them, will that work, in making [him]
think that i am installing anew, huh?
Here's a little diddy I made to help me mount files easily.
It'll auto mount the following files:
Puppy1: image.gz, image, usr_cram.fs
Puppy2: initrd.gz, initrd, pup_save*.3fs, pup_*.sfs
With unrecognized files, it will ask for the file type.
It'll auto mount the following files:
Puppy1: image.gz, image, usr_cram.fs
Puppy2: initrd.gz, initrd, pup_save*.3fs, pup_*.sfs
With unrecognized files, it will ask for the file type.
- Attachments
-
- xfilemount.gz
- If there's any problems... Personal Message me.
- (1.37 KiB) Downloaded 339 times