Puppy Linux Discussion Forum Forum Index Puppy Linux Discussion Forum
Puppy HOME page : puppylinux.com
"THE" alternative forum : puppylinux.info
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

The time now is Wed 30 Jul 2014, 09:15
All times are UTC - 4
 Forum index » House Training » Beginners Help ( Start Here)
BoxPup Frugal Install
Moderators: Flash, Ian, JohnMurga
Post new topic   Reply to topic View previous topic :: View next topic
Page 1 of 1 [7 Posts]  
Author Message
Phabbits

Joined: 23 Feb 2013
Posts: 9

PostPosted: Sat 23 Feb 2013, 14:51    Post subject:  BoxPup Frugal Install
Subject description: How do I install boxpup puppy linux frugaly?
 

Hello everyone I am a newbie here. I am attempting to install BoxPup 4.3.1 on an old laptop, the laptop has no cd rom and can't boot from usb. I have a ide to usb adapter which I am using to connect the laptop's internal hdd to another desktop pc. I was able to partition the hdd with GParted and I placed the puppy files on it. I have grub running on the hdd and configured the menu.lst. When I tried to boot everything went find till it looked for the PUP-431.shs and could not find it.
Thanks for any replies and all replies are appreciated.
Back to top
View user's profile Send private message 
bigpup


Joined: 11 Oct 2009
Posts: 5006
Location: Charleston S.C. USA

PostPosted: Sat 23 Feb 2013, 17:21    Post subject:  

Where did you place the Puppy files on the hard drive?
Post the grub menu.lst entry you made.

Also make sure the Puppy file names are in lower case.

_________________
I have found, in trying to help people, that the things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected Shocked
Back to top
View user's profile Send private message 
Phabbits

Joined: 23 Feb 2013
Posts: 9

PostPosted: Sat 23 Feb 2013, 17:38    Post subject:  

I placed the puppy files just on the hdd if that makes sense. Inside the folder "boxpup"
And here is what the menu.lst file looks like
# GRUB configuration file '/boot/grub/menu.lst'.
# generated by 'grubconfig'. Fri Feb 22 15:50:43 2013
#
# The backup copy of the MBR for drive '/dev/sda' is
# here '/boot/grub/mbr.sda.23647'. You can restore it like this.
# dd if=/boot/grub/mbr.sda.23647 of=/dev/sda bs=512 count=1
#
# Start GRUB global section
#timeout 30
color light-gray/blue black/light-gray
# End GRUB global section
# Linux bootable partition config begins
title BoxPup (on /dev/sda2)
rootnoverify (hd0,1)
kernel /boxpup/vmlinuz pmedia=idehd
psubdir=boxpup nosmp
initrd /boxpup/initrd.gz

title Linux (on /dev/sda2)
root (hd0,1)
kernel /boot/vmlinuz root=/dev/sda2 ro vga=normal
# Linux bootable partition config ends
title Install GRUB to floppy disk (on /dev/fd0)
pause Insert a formatted floppy disk and press enter.
root (hd0,1)
setup (fd0)
pause Press enter to continue.
title Install GRUB to Linux partition (on /dev/sda2)
root (hd0,1)
setup (hd0,1)
pause Press enter to continue.
title - For help press 'c', then type: 'help'
root (hd0)
title - For usage examples, type: 'cat /boot/grub/usage.txt'
root (hd0)[/i][/i]
Back to top
View user's profile Send private message 
mill0001

Joined: 01 Feb 2007
Posts: 375
Location: "People's Republik of Kalifornia"

PostPosted: Sun 24 Feb 2013, 13:38    Post subject:  

Hi, in your 1st post you said "looked for PUP-431.shs and could not find it". If the pup file is named PUP-431.shs it is not correct. Rename that to pup-431.sfs and you should be good to go.
Back to top
View user's profile Send private message 
Phabbits

Joined: 23 Feb 2013
Posts: 9

PostPosted: Sun 24 Feb 2013, 21:15    Post subject:  

mill0001 wrote:
Hi, in your 1st post you said "looked for PUP-431.shs and could not find it". If the pup file is named PUP-431.shs it is not correct. Rename that to pup-431.sfs and you should be good to go.

No, sadly it is pup-431.sfs Sad
Back to top
View user's profile Send private message 
rcrsn51


Joined: 05 Sep 2006
Posts: 8926
Location: Stratford, Ontario

PostPosted: Sun 24 Feb 2013, 21:21    Post subject:  

Code:
kernel /boxpup/vmlinuz pmedia=idehd
psubdir=boxpup nosmp

In your menu.lst file are these on two separate lines?

It should be

Code:
kernel /boxpup/vmlinuz pmedia=idehd psubdir=boxpup nosmp


Does your hard drive have two partitions? And is Boxpup in the second one?
Back to top
View user's profile Send private message 
Phabbits

Joined: 23 Feb 2013
Posts: 9

PostPosted: Mon 25 Feb 2013, 17:09    Post subject:  

rcrsn51 wrote:
Code:
kernel /boxpup/vmlinuz pmedia=idehd
psubdir=boxpup nosmp

In your menu.lst file are these on two separate lines?

It should be

Code:
kernel /boxpup/vmlinuz pmedia=idehd psubdir=boxpup nosmp


Does your hard drive have two partitions? And is Boxpup in the second one?

Yes the HDD has two partitons. First one is swap and the second one is Boxpup. Also the code in menu.lst is just code I found on the internet not from the universal installer. So I will edit that line.
Back to top
View user's profile Send private message 
Display posts from previous:   Sort by:   
Page 1 of 1 [7 Posts]  
Post new topic   Reply to topic View previous topic :: View next topic
 Forum index » House Training » Beginners Help ( Start Here)
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group
[ Time: 0.0560s ][ Queries: 12 (0.0036s) ][ GZIP on ]