Slacko 5.5 Final
***************************************
Delta for the 4G version with wl bug is reuploaded!
See main post
***************************************
SFR
I put in isolinux.bin from lupu 5.2.5. I don't have later atm, but I could use the one from my Slackware install, it is likely much later. The one I used is attached. It's real gz .
I agree it would be a nice feature if the icons switching to phones for the net tray icon would be nice accross the board. It's a work in progress but likely not to make final.
Delta for the 4G version with wl bug is reuploaded!
See main post
***************************************
SFR
I put in isolinux.bin from lupu 5.2.5. I don't have later atm, but I could use the one from my Slackware install, it is likely much later. The one I used is attached. It's real gz .
I agree it would be a nice feature if the icons switching to phones for the net tray icon would be nice accross the board. It's a work in progress but likely not to make final.
- Attachments
-
- isolinux.bin.gz
- (19.32 KiB) Downloaded 186 times
Puppy Linux Blog - contact me for access
Thanks Jim.
-----
Here is isolinux.bin from my slackware install.
-----
Here is isolinux.bin from my slackware install.
- Attachments
-
- isolinux.bin.gz
- This is from slackware-14.0 32 bit install.
- (18.93 KiB) Downloaded 169 times
Puppy Linux Blog - contact me for access
Did you try the one from PPM?oldyeller wrote:Hi Mick,
I tried the non pae on my Dell D430,
I installed three different wine and in all of them I had one program theWord that would not minimize it would just reopen right away and the other program BibleAnalyzer would minimize and could not reopen it at all.
Puppy Linux Blog - contact me for access
Sorry about that I guess I should have said so right off the bat, But yes I did,01micko wrote:Did you try the one from PPM?oldyeller wrote:Hi Mick,
I tried the non pae on my Dell D430,
I installed three different wine and in all of them I had one program theWord that would not minimize it would just reopen right away and the other program BibleAnalyzer would minimize and could not reopen it at all.
1.4.1 and 1.5.20
Hmm, the one you attached is the "bug-free" version indeed (ISOLINUX 4.03, same as in Lupu-528.005).01micko wrote: I put in isolinux.bin from lupu 5.2.5. I don't have later atm, but I could use the one from my Slackware install, it is likely much later. The one I used is attached.
But in the ISO I have built from 5.4.0.5 + delta is the old version. That's odd...
The one from Slackware is even newer (4.05) and it works too.
Greetings!
[color=red][size=75][O]bdurate [R]ules [D]estroy [E]nthusiastic [R]ebels => [C]reative [H]umans [A]lways [O]pen [S]ource[/size][/color]
[b][color=green]Omnia mea mecum porto.[/color][/b]
[b][color=green]Omnia mea mecum porto.[/color][/b]
SFR, yes it is weird.. in my woof tree is the new one, but the old one did get used! I'll check the build script, maybe it is stored elsewhere after initial run of woof.
--- haha... look at this
but.. in 3builddistro...
So now i know..
--- haha... look at this
Code: Select all
# ls woof-out_x86_x86_slackware_14.0/boot
boot-dialog initrd-tree0 makeext2initrd README.txt
cpio isolinux.bin makeinitrdgz.sh vercmp.c
depmod makecpioinitrd README.HTM
Code: Select all
# grep 'isolinux.bin' woof-out_x86_x86_slackware_14.0/3builddistro
if [ -f rootfs-complete/usr/lib/syslinux/isolinux.bin ];then
cp -a rootfs-complete/usr/lib/syslinux/isolinux.bin build/
cp -a ../boot/isolinux.bin build/
$MKISOFS -D -R -o ${DISTRO_FILE_PREFIX}-${DISTRO_VERSION}${SCSIFLAG}.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table ./build/
Puppy Linux Blog - contact me for access
Hi Mick,
I'm not having the problem with the PAE version using Wine along with BibleAnalyzer and eSword that oldyeller reported using the non-PAE version. However, theWord does have the problem. Also, Bibletime is working fine.
Cheers,
Jim
I'm not having the problem with the PAE version using Wine along with BibleAnalyzer and eSword that oldyeller reported using the non-PAE version. However, theWord does have the problem. Also, Bibletime is working fine.
Cheers,
Jim
- Attachments
-
- image-1.jpg
- (58.6 KiB) Downloaded 409 times
Jim and oldyeller.
It is possible that it's a JWM issue. scsijon reckons that 692 (that is used in this version) is unstable.
You can try 691 attached.
It is possible that it's a JWM issue. scsijon reckons that 692 (that is used in this version) is unstable.
You can try 691 attached.
- Attachments
-
- jwm-691.pet
- (83.5 KiB) Downloaded 195 times
Puppy Linux Blog - contact me for access
Manual upgrade from 5.4.0.5 to 5.4.0.6 on the old P4 test box. Everything looking good so far.
# report-video
VIDEO REPORT: Slacko Puppy, version 5.4.0.6
Chip description:
VGA compatible controller: Intel Corporation 82865G Integrated Graphics Controller (rev 02)
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1024x768
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): intel
Loaded modules: dbe dri dri2 extmod fb glx kbd mouse record
Actual rendering on monitor:
Resolution: 1024x768 pixels (270x203 millimeters)
Depth: 24 planes
...the above also recorded in /tmp/report-video
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
378 frames in 5.0 seconds = 75.464 FPS
376 frames in 5.0 seconds = 75.144 FPS
376 frames in 5.0 seconds = 75.143 FPS
376 frames in 5.0 seconds = 75.144 FPS
376 frames in 5.0 seconds = 75.143 FPS
376 frames in 5.0 seconds = 75.143 FPS
-Computer-
Processor : Intel(R) Pentium(R) 4 CPU 2.80GHz
Memory : 2592MB (213MB used)
Machine Type : Physical machine
Operating System : Slacko Puppy - 5.4.0.6
User Name : root (root)
Date/Time : Sun 03 Mar 2013 11:19:59 PM CST
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Mesa DRI Intel(R) 865G x86/MMX/SSE2
X11 Vendor : The X.Org Foundation
-Audio Devices-
Audio Adapter : ICH4 - Intel ICH5
-Input Devices--Computer-
Processor : Intel(R) Pentium(R) 4 CPU 2.80GHz
Memory : 2592MB (213MB used)
Machine Type : Physical machine
Operating System : Slacko Puppy - 5.4.0.6
User Name : root (root)
Date/Time : Sun 03 Mar 2013 11:19:59 PM CST
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Mesa DRI Intel(R) 865G x86/MMX/SSE2
X11 Vendor : The X.Org Foundation
-Audio Devices-
Audio Adapter : ICH4 - Intel ICH5
# report-video
VIDEO REPORT: Slacko Puppy, version 5.4.0.6
Chip description:
VGA compatible controller: Intel Corporation 82865G Integrated Graphics Controller (rev 02)
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1024x768
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): intel
Loaded modules: dbe dri dri2 extmod fb glx kbd mouse record
Actual rendering on monitor:
Resolution: 1024x768 pixels (270x203 millimeters)
Depth: 24 planes
...the above also recorded in /tmp/report-video
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
378 frames in 5.0 seconds = 75.464 FPS
376 frames in 5.0 seconds = 75.144 FPS
376 frames in 5.0 seconds = 75.143 FPS
376 frames in 5.0 seconds = 75.144 FPS
376 frames in 5.0 seconds = 75.143 FPS
376 frames in 5.0 seconds = 75.143 FPS
-Computer-
Processor : Intel(R) Pentium(R) 4 CPU 2.80GHz
Memory : 2592MB (213MB used)
Machine Type : Physical machine
Operating System : Slacko Puppy - 5.4.0.6
User Name : root (root)
Date/Time : Sun 03 Mar 2013 11:19:59 PM CST
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Mesa DRI Intel(R) 865G x86/MMX/SSE2
X11 Vendor : The X.Org Foundation
-Audio Devices-
Audio Adapter : ICH4 - Intel ICH5
-Input Devices--Computer-
Processor : Intel(R) Pentium(R) 4 CPU 2.80GHz
Memory : 2592MB (213MB used)
Machine Type : Physical machine
Operating System : Slacko Puppy - 5.4.0.6
User Name : root (root)
Date/Time : Sun 03 Mar 2013 11:19:59 PM CST
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Mesa DRI Intel(R) 865G x86/MMX/SSE2
X11 Vendor : The X.Org Foundation
-Audio Devices-
Audio Adapter : ICH4 - Intel ICH5
Code: Select all
# free
total used free shared buffers
Mem: 2592796 764564 1828232 0 47760
-/+ buffers: 716804 1875992
Swap: 4198396 0 4198396
#
Evening here
I would back up the personal data and do a clean install, after testing pfix=ram of course. Because of Slackware moving to "kmod" (module-init-tools has not been developed in 3 years) for kernel module loading there is a rocky road to tread in upgrading from 5.3 to 5.4 (soon to be 5.5). I'll do a delta from 5.4.0.5 when ready.
All that said, if you have backed up there is no harm in trying but first read THIS page. There will be a new page with even more comprehensive tips and work arounds for known issues on release of 5.5.
I would back up the personal data and do a clean install, after testing pfix=ram of course. Because of Slackware moving to "kmod" (module-init-tools has not been developed in 3 years) for kernel module loading there is a rocky road to tread in upgrading from 5.3 to 5.4 (soon to be 5.5). I'll do a delta from 5.4.0.5 when ready.
All that said, if you have backed up there is no harm in trying but first read THIS page. There will be a new page with even more comprehensive tips and work arounds for known issues on release of 5.5.
Puppy Linux Blog - contact me for access
Thanks for your speedy response, mick! I guess this information may be of assistance to quite a few folks, maybe worth repeating de temps en temps?
Your notes in your link are especially helpful regarding wireless issues; have had 'no connect' and' disappearing connection' features crop up frequently. Not saving the WPA Key can also be distracting, requiring finding the router(!) and up-ending it to read the key.
Personally, I took the precaution of lifting the floorboards during my last move and hard-wiring networking throughout. I also set my Key to something more memorable than the one supplied, but editing the router config is beyond most regular folks and can cause havoc if they hit the wrong key...
Your notes in your link are especially helpful regarding wireless issues; have had 'no connect' and' disappearing connection' features crop up frequently. Not saving the WPA Key can also be distracting, requiring finding the router(!) and up-ending it to read the key.
Personally, I took the precaution of lifting the floorboards during my last move and hard-wiring networking throughout. I also set my Key to something more memorable than the one supplied, but editing the router config is beyond most regular folks and can cause havoc if they hit the wrong key...
No problem.
And thanks.. you jogged my memory into including another helpful parameter for wireless stability.. I'll just dig up the code... to do with power management.
Ah... my memory prevailed (but I did check )
And thanks.. you jogged my memory into including another helpful parameter for wireless stability.. I'll just dig up the code... to do with power management.
Ah... my memory prevailed (but I did check )
Code: Select all
echo "iwconfig wlan0 power off" >> /etc/rc.d/rc.local
Puppy Linux Blog - contact me for access
Concerning a workaround for the wireless bug, I had written a "how to"
http://murga-linux.com/puppy/viewtopic.php?t=84266
Art
http://murga-linux.com/puppy/viewtopic.php?t=84266
Art
I had occasion to look at /tmp/bootsysinit.log and found that a directory and a file were not being found.
One was /lib/modules/3.2.33 that was there, but named 3.2.33-4g.
I created a syslink in the modules directory to it.
The other, a file, was /etc/modules/firmware.dep.3.2.33.
When that file is not found, do the firmware dependencies get loaded?
I was just wondering why the -4g was added to directory and file names on files associated with the sysinit process as it seems that it is causing directories and files to not be found.
One was /lib/modules/3.2.33 that was there, but named 3.2.33-4g.
I created a syslink in the modules directory to it.
The other, a file, was /etc/modules/firmware.dep.3.2.33.
When that file is not found, do the firmware dependencies get loaded?
I was just wondering why the -4g was added to directory and file names on files associated with the sysinit process as it seems that it is causing directories and files to not be found.
For some reason my Parents weren't particularly keen the idea of me drilling holes through the walls and ceiling of our freshly decorated study when we got broadband. Spoilsports.Sage wrote:Personally, I took the precaution of lifting the floorboards during my last move and hard-wiring networking throughout.
Zhaan - AMD K6 2 500, 512MB RAM, ATI Rage 128 VR. Full install Wary 5.5 [url=http://tinyurl.com/dy66kh8]HardInfo Report[/url]
Merlin - Core i5-4590, 8GB RAM, Radeon R9 270X. Slacko 5.7.0
Merlin - Core i5-4590, 8GB RAM, Radeon R9 270X. Slacko 5.7.0
I must admit that power management wasn't near the top of my list of wireless-related things to check on a desktop but I'll give it a shot anyway. It does seem to be a bit more reliable on 5.4.0.6. The dropouts seem to be related to the amount of data transferred somehow.01micko wrote:another helpful parameter for wireless stability.. I'll just dig up the code... to do with power management.
Ah... my memory prevailed (but I did check )Code: Select all
echo "iwconfig wlan0 power off" >> /etc/rc.d/rc.local
Zhaan - AMD K6 2 500, 512MB RAM, ATI Rage 128 VR. Full install Wary 5.5 [url=http://tinyurl.com/dy66kh8]HardInfo Report[/url]
Merlin - Core i5-4590, 8GB RAM, Radeon R9 270X. Slacko 5.7.0
Merlin - Core i5-4590, 8GB RAM, Radeon R9 270X. Slacko 5.7.0