| Author |
Message |
wyzguy
Joined: 13 Oct 2012
Posts: 5
|
 Posted: Sat 06 Apr 2013, 03:02 Post subject:
 Xorg.conf monitor bug.
Subject description: Bad VertRefresh range. |
|
Please run the following commands.
1. ddcprobe | grep -i range
2. cat /var/log/Xorg.0.log | grep -i ranges
3. cat /etc/X11/xorg.conf | egrep -i 'horiz|vert'
The horizontal and vertical min-max ranges are different for each monitor.
The ddcprobe output and .log output on mine match fine.
The vertrefresh range from xorg.conf is not correct.
Important. Xorg.conf info overrides the correct info in the .log file!
Mine shows 59-76 which does match the comment dated 111029 at the top
of the xorg.conf file. Check out your specs on your computer.
This was on Upup 3.8.4.2, but applies to most (all?) recent distros.
It is probably a xorgwizard bug. This should be confirmable by others.
Thanks
|
|
Back to top
|
|
 |
darkcity
Joined: 23 May 2010
Posts: 2357
Location: near here
|
| Posted: Sat 06 Apr 2013, 13:10 Post subject:
|
|
this is what I get on Slacko 5.3.1. Guess this confirms it used to work.
| Code: | # ddcprobe | grep -i range
# cat /var/log/Xorg.0.log | grep -i ranges
# cat /etc/X11/xorg.conf | egrep -i 'horiz|vert'
HorizSync 31.5-48.5
VertRefresh 56-72
# X -version
X.Org X Server 1.9.5
Release Date: 2011-03-17
X Protocol Version 11, Revision 0
Build Operating System: Slackware 13.37 Slackware Linux Project
Current Operating System: Linux puppypc18935 2.6.37.6 #1 SMP Sun Jul 10 08:27:28 EST 2011 i686
Kernel command line: root=/dev/sda1 ro vga=normal psubdir=slacko531
Build Date: 18 March 2011 12:08:03AM
Current version of pixman: 0.20.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
#
|
_________________
helping Wiki for help | IF SendSpace link = "dead" THEN PM me ("up file to http://meownplanet.net/")
|
|
Back to top
|
|
|
L18L
Joined: 19 Jun 2010
Posts: 2188
Location: Burghaslach, Germany somewhere also known as "Hosla"
|
Posted: Sat 06 Apr 2013, 14:43 Post subject:
Re: Xorg.conf monitor bug.
Subject description: Bad VertRefresh range. |
|
| wyzguy wrote: | | ... This should be confirmable by others. |
| Code: | # ddcprobe | grep -i range
monitorrange: 28-82, 50-76
#
# cat /var/log/Xorg.0.log | grep -i ranges
[ 24.698] (II) CHROME(0): Ranges: V min: 50 V max: 76 Hz, H min: 28 H max: 82 kHz, PixClock max 175 MHz
[ 24.698] (II) CHROME(0): Using hsync ranges from config file
[ 24.698] (II) CHROME(0): Using vrefresh ranges from config file
#
# cat /etc/X11/xorg.conf | egrep -i 'horiz|vert'
#111029 Terryphi reported 1cm screen displacement, changed vert freq range from 56-76 to 59-76.
HorizSync 35-81
VertRefresh 59-76
# |
Confirm
precise 5.5
0.5cm screen displacement
-------
edited
After having changed xorg.conf manually without success I have used xorwizard and now screen is without displacement
| Code: | # ddcprobe | grep -i range
monitorrange: 28-82, 50-76
#
# cat /etc/X11/xorg.conf | egrep -i 'horiz|vert'
HorizSync 28-82
VertRefresh 50-72
# |
Confused?
I don't care.
I like my no more displaced screen.
Thank you 
|
|
Back to top
|
|
|
Karl Godt
Joined: 20 Jun 2010
Posts: 3641
Location: Kiel,Germany
|
| Posted: Sat 06 Apr 2013, 15:29 Post subject:
|
|
| Code: | bash-3.2# ddcprobe | grep -i range
monitorrange: 30-81, 56-75
bash-3.2# cat /var/log/Xorg.0.log | grep -i ranges
(II) Addressable bus resource ranges are
(II) OS-reported resource ranges:
(II) Active PCI resource ranges:
(II) Active PCI resource ranges after removing overlaps:
(II) OS-reported resource ranges after removing overlaps with PCI:
(II) All system resource ranges:
(II) resource ranges after xf86ClaimFixedResources() call:
(II) resource ranges after probing:
(II) VESA(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 170 MHz
(II) VESA(0): Using hsync ranges from config file
(II) VESA(0): Using vrefresh ranges from config file
(II) resource ranges after preInit:
bash-3.2# cat /etc/X11/xorg.conf | egrep -i 'horiz|vert'
HorizSync 30-81
VertRefresh 56-71 |
| Code: | sh-3.2# uname -r
2.6.37.4-KRG-Pentium-Classic-LowLatency-TmpDevFs-1
sh-3.2# grep -E 'VERSION|NAME' /etc/DISTRO_SPECS
DISTRO_NAME='Puppy'
DISTRO_VERSION=431
DISTRO_COMPAT_VERSION='4'
sh-3.2# Xorg -version
X Window System Version 1.3.0
Release Date: 19 April 2007 |
Have a newish widescreen monitor at the moment, which already has some little displacements in the bootconsole very likely because of the kernel and not only Xorg. The other much older LCD monitor i have does not even work with ddcprobe sometimes on 3.x kernels . Additionally, ddcprobe many times has to be run twice, as the xorgwizard and xwin scripts do it, to present output.
_________________
«Give me GUI or Death» -- I give you [[Xx]term[inal]] [[Cc]on[s][ole]] .
Macpup user since 2010 on full installations.
People who want problems with Puppy boot frugal 
|
|
Back to top
|
|
|
Karl Godt
Joined: 20 Jun 2010
Posts: 3641
Location: Kiel,Germany
|
| Posted: Mon 08 Apr 2013, 00:11 Post subject:
|
|
Now :
| Code: | bash-3.00# uname -r
2.6.30.9-i586-dpup005-Celeron2G
bash-3.00# . /etc/DISTRO_SPECS ; echo $DISTRO_NAME $DISTRO_VERSION
Puppy 430 |
Here Xorg-1.3.0 xorgwizard auto selects the intel Xorg driver though both times i915.ko is blacklisted and not loaded.
| Code: | bash-3.00# ddcprobe | grep -i range
monitorrange: 30-81, 56-75
bash-3.00# cat /var/log/Xorg.0.log | grep -i ranges
(II) Addressable bus resource ranges are
(II) OS-reported resource ranges:
(II) Active PCI resource ranges:
(II) Active PCI resource ranges after removing overlaps:
(II) OS-reported resource ranges after removing overlaps with PCI:
(II) All system resource ranges:
(II) resource ranges after xf86ClaimFixedResources() call:
(II) resource ranges after probing:
(II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 170 MHz
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) resource ranges after preInit:
bash-3.00# cat /etc/X11/xorg.conf | egrep -i 'horiz|vert'
### Comment all HorizSync and VertRefresh values to use DDC:
HorizSync 30.0-81.0
VertRefresh 56.0-71.0
|
|
|
Back to top
|
|
|
Karl Godt
Joined: 20 Jun 2010
Posts: 3641
Location: Kiel,Germany
|
| Posted: Mon 08 Apr 2013, 16:10 Post subject:
|
|
This is also a pre 2011 :
| Code: | bash-3.00# uname -r
2.6.37.4-KRG-p4_1
bash-3.00# source /etc/DISTRO_SPECS; echo $DISTRO_NAME $DISTRO_VERSION
Lucid Puppy 218 |
| Code: | bash-3.00# ddcprobe | grep -i range
monitorrange: 30-81, 56-75
bash-3.00# grep -i ranges /var/log/Xorg.0.log
(II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 170 MHz
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
bash-3.00# egrep -i 'horiz|vert' /etc/X11/xorg.conf
HorizSync 30-81
VertRefresh 56-71
bash-3.00# Xorg -version
X.Org X Server 1.7.6
Release Date: 2010-03-17 |
_________________
«Give me GUI or Death» -- I give you [[Xx]term[inal]] [[Cc]on[s][ole]] .
Macpup user since 2010 on full installations.
People who want problems with Puppy boot frugal
|
|
Back to top
|
|
|
`f00
Joined: 06 Nov 2008
Posts: 809
Location: the Western Reserve
|
Posted: Mon 08 Apr 2013, 17:32 Post subject:
Subject description: 2¢ discounted, fwiw |
|
on precise 5.3.96
| Code: | # ddcprobe | grep -i range
monitorrange: 30-97, 50-150
# cat /var/log/Xorg.0.log | grep -i ranges
# cat /etc/X11/xorg.conf | egrep -i 'horiz|vert'
#111029 Terryphi reported 1cm screen displacement, changed vert freq range from 56-76 to 59-76.
HorizSync 43-53
VertRefresh 59-69
# X -version
X.Org X Server 1.11.3
Release Date: 2011-12-16
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.42-26-generic i686 Ubuntu
Current Operating System: Linux puppypc25410 3.2.29 #1 SMP Thu Sep 13 20:33:02 GMT-8 2012 i686
Kernel command line: video=640x480 initrd=initrd.gz pmedia=cd BOOT_IMAGE=vmlinuz
Build Date: 04 August 2012 01:51:24AM
xorg-server 2:1.11.4-0ubuntu10.7 (For technical support please see http://www.ubuntu.com/support)
Current version of pixman: 0.24.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
# uname -r
3.2.29
# |
..and..
| Code: | Report Video 1.3 - Mon 8 Apr 2013 on Precise Puppy 5.3.96 - Linux 3.2.29 i686
Chip description:
9.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV280 [Radeon 9200 SE] (rev 01) 0.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV280 [Radeon 9200] (rev 01)
oem: ATI RADEON 9200
X Server: Xorg Driver used: radeon
X.Org version: 1.11.3
dimensions: 1024x768 pixels (270x203 millimeters)
depth of root window: 24 planes |
..as well as manual edit of xorg.conf with the help of xvidtune(ModeLine) to correct offset at preferred res..
| Code: | Section "Monitor"
Identifier "Monitor0"
VendorName "___"
ModelName "CM1997PF"
HorizSync 43-53
VertRefresh 59-69
UseModes "Modes0" #monitor0usemodes
Option "PreferredMode" "1024x768" #monitor0prefmode
EndSection
Section "Modes"
Identifier "Modes0"
ModeLine "1024x768" 63.50 1024 1048 1152 1340 768 771 775 798 -hsync +vsync # modes0modeline0
EndSection |
..this modeline almost gives edge-to-edge display on my CRT (it's shy maybe 5 pixels both sides horizontally). The next step to reduce width (1340->1344) throws my display to ~75% screenwidth with an inverted h-pincushion effect.
On less recent pups I never had to correct display offset with a custom modeline (racy 5.4.91 is another with offset issue on my hwr).
|
|
Back to top
|
|
|
wyzguy
Joined: 13 Oct 2012
Posts: 5
|
| Posted: Tue 09 Apr 2013, 00:53 Post subject:
|
|
I would next try commenting out HorizSync and VertRefresh in xorg.conf, save it and reboot. I just found out that changes made to xorg.conf are persistent. They didnt use to be.
Oh, do a xrandr >1.txt from the terminal command line before, and after rebooting do a xrandr >2.txt. Then they then can be compared.
I gained 1 new resolution line and 3 new refresh rates.
Karl,
The request I made on Feb. 25 in the REQUESTS subsection gets its edid from the kernel at boot time. In other words, it does not use the edid from get-edid (won't run on mine) or ddcprobe which does not create an edid file.
I think it needs checked out to see if is a more reliable solution. Could you create a tiny bash script to scan that directory structure and if the file named "status" shows "connected", then redirect the file "edid" into edid-decode for output. Also edid-decode would need compiling, removing debug info, creating links?, and making it a pet. You would need to print out the card number and output connector name from the next higher up directory also.
Thanks
|
|
Back to top
|
|
|
Karl Godt
Joined: 20 Jun 2010
Posts: 3641
Location: Kiel,Germany
|
| Posted: Tue 09 Apr 2013, 02:19 Post subject:
|
|
wixguy, I think that ddcprobe could work, at least it does for me in sakura/vte terminal -
BUT NOT in the kernel console nor in traditional xterm console . And the kernel console is the one that is needed.
I have no idea why .
Thats why there is 'xorg.conf.' :
| one of my xorg.conf wrote: |
#PuppyHardwareProfile=
|
| /usr/sbin/xorgwizard wrote: |
| Code: | #v2.13 want a hardware profile so can bootup on different PCs...
PROFILECHIP=`grep -m1 '^oem: ' /tmp/ddcprobe.txt | cut -f 2-4 -d ' ' | tr ' ' '_' | sed -e 's/[^0-9a-zA-Z]/_/g'`
## Dougal: maybe add "^monitorname: "??
#PROFILEMONITOR=`grep -E -m1 '^monitorrange: |^monitorid: |^eisa: ' /tmp/ddcprobe.txt | cut -f 2 -d ':' | tr -d ' ' | sed -e 's/[^0-9a-zA-Z]/_/g'`
#v3.95 'eisa:' and 'id:' return fluctuating values on some PCs, so search in this order...
PROFILEMONITOR=`grep '^monitorid: ' /tmp/ddcprobe.txt | head -n 1 | cut -f 2 -d ':' | tr -d ' ' | sed -e 's/[^0-9a-zA-Z]/_/g'`
[ "$PROFILEMONITOR" = "" ] && PROFILEMONITOR=`grep '^monitorname: ' /tmp/ddcprobe.txt | head -n 1 | cut -f 2 -d ':' | tr -d ' ' | sed -e 's/[^0-9a-zA-Z]/_/g'`
[ "$PROFILEMONITOR" = "" ] && PROFILEMONITOR=`grep '^monitorrange: ' /tmp/ddcprobe.txt | head -n 1 | cut -f 2 -d ':' | tr -d ' ' | sed -e 's/[^0-9a-zA-Z]/_/g'`
#[ "$PROFILEMONITOR" = "" ] && PROFILEMONITOR=`grep '^dtiming: ' /tmp/ddcprobe.txt | tail -n 1 | cut -f 2 -d ':' | tr -d ' ' | sed -e 's/[^0-9a-zA-Z]/_/g'`
[ "$PROFILEMONITOR" = "" ] && PROFILEMONITOR=`grep '^manufacture: ' /tmp/ddcprobe.txt | tail -n 1 | cut -f 2 -d ':' | tr -d ' ' | sed -e 's/[^0-9a-zA-Z]/_/g'`
#[ "$PROFILEMONITOR" = "" ] && PROFILEMONITOR=`grep '^eisa: ' /tmp/ddcprobe.txt | head -n 1 | cut -f 2 -d ':' | tr -d ' ' | sed -e 's/[^0-9a-zA-Z]/_/g'`
|
|
_________________
«Give me GUI or Death» -- I give you [[Xx]term[inal]] [[Cc]on[s][ole]] .
Macpup user since 2010 on full installations.
People who want problems with Puppy boot frugal
|
|
Back to top
|
|
|
Karl Godt
Joined: 20 Jun 2010
Posts: 3641
Location: Kiel,Germany
|
| Posted: Wed 10 Apr 2013, 18:25 Post subject:
|
|
| Quote: | ddcprobe >/tmp/ddcprobe.txt
#weird (ddcprobe is very weird), on some hardware, edid monitor probe fails
#every alternate run of ddcprobe...
case "`cat /tmp/ddcprobe.txt`" in *edidfail*)
sleep 1
ddcprobe >/tmp/ddcprobe.txt
;;
esac
| Code: | get_edid_func(){ ##+++2013-04-11
which get-edid || return 0
which edid-decode || return 0
if [ ! -s /tmp/ddcprobe.txt ]; then
get-edid 1>/tmp/get-edid.out 2>/tmp/get-edit.txt
sleep 1s
[ -s /tmp/get-edid.out ] || return 0
edid-decode /tmp/get-edid.out >/tmp/ddcprobe.txt
fi
}
get_edid_func |
|
if get-edid and edid-decode are installed in both xwin and xorgwizard ( + xorgwizard-automatic ? ) .
|
|
Back to top
|
|
|
Karl Godt
Joined: 20 Jun 2010
Posts: 3641
Location: Kiel,Germany
|
| Posted: Wed 10 Apr 2013, 18:33 Post subject:
|
|
Short snap about the displaced bootscreen of mine.
Sometimes half a letter is beyond the left edge, this time two letters swallowed.
( will attach better one once upon a time )
| Description |
|
| Filesize |
108.8 KB |
| Viewed |
139 Time(s) |
|
|
|
Back to top
|
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
Forum index » House Training » Bugs ( Submit bugs )
