Precise Puppy 5.6.1-final, May 29, 2013

Please post any bugs you have found
Post Reply
Message
Author
User avatar
peebee
Posts: 4370
Joined: Sun 21 Sep 2008, 12:31
Location: Worcestershire, UK
Contact:

Re: Precise Puppy 5.6-FINAL

#81 Post by peebee »

ETP wrote:The only issue so far was when I decided to switch from the Nouveau driver to the nvidia-glx-319.17-k3.2.44.sfs.
In order to persuade it to load I first had to blacklist the Nouveau module.Upon re-booting it then picked it up straight away rather than the NV driver.
Like ETP I had to blacklist nouveau before nvidia 304.88 from an sfs produced by getnvidia 0.9.1 pet would work - xorgwizard did not offer nvidia as a possibility.

Regards
peebee
ImageLxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64

User avatar
ASRI éducation
Posts: 3197
Joined: Sat 09 May 2009, 12:10
Location: France
Contact:

Re: Precise Puppy 5.6-FINAL

#82 Post by ASRI éducation »

peebee wrote:xorgwizard did not offer nvidia as a possibility.
Unfriendly for a new user.

PaulR
Posts: 249
Joined: Wed 04 May 2005, 18:45
Location: UK

#83 Post by PaulR »

I downloaded 5.6 iso and created a bootable USB within Slacko.

Everything seems to work fine except:

1 I don't get an option to put the savefile on sda1 (where the slacksave lives, ext3) although I can mount it fine

2 When I try to save to sdb1 (the boot usb, vfat) it gets as far as exiting X and showing the 'saving' message but then hangs. Savefile requested is 128mb on a 2gb stick so plenty of room :)

This is on a Pentium M IBM Thinkpad T42 1Gb RAM. Not sure what other useful info I can provide?

Paul

tlchost
Posts: 2057
Joined: Sun 05 Aug 2007, 23:26
Location: Baltimore, Maryland USA
Contact:

Intel Audio Chip

#84 Post by tlchost »

None of the Precise 5.x series seem to work with my intel audio chip. I've posted about the problem in other threads, asked for advice. No reaction at all, so I'll stop trying.

Just as an aside, Slacko, FatSlacko, Rarin and Upup Precise all recognize the sound chip and Retrovol works.

Thom

User avatar
OscarTalks
Posts: 2196
Joined: Mon 06 Feb 2012, 00:58
Location: London, England

Re: Precise Puppy 5.6-FINAL

#85 Post by OscarTalks »

peebee wrote:Like ETP I had to blacklist nouveau before nvidia 304.88 from an sfs produced by getnvidia 0.9.1 pet would work - xorgwizard did not offer nvidia as a possibility
If you run the proprietary nvidia installer it detects if nouveau is loaded. It gives an error but it offers to install a small file into /etc/modprobe.d to disable nouveau for you (on reboot) so the driver can be installed on the second try.

When I was tinkering with making a .pet of the nvidia 173.14.37 driver for Dpup Wheezy I opted to place this disabler file in the .pet along with the message telling the user to reboot. On reboot nouveau has been disabled and xorg wizard offers the nvidia driver.

Uninstallation removes this file and restores nouveau availability.

I am still not sure if this is the best way. I guess nouveau becomes permanently unavailable while ever nvidia driver is installed but theoretically you don't need it any more. There used to be a nouveau unloader in the old xorg wizard but has that mechanism been changed now?

If the switch can't be done without a reboot (?) then a reboot followed by a run of xorg wizard is just about as smooth as it can get I guess.
Oscar in England
Image

p310don
Posts: 1492
Joined: Tue 19 May 2009, 23:11
Location: Brisbane, Australia

#86 Post by p310don »

Torrent for download and sharing:
Attachments
precise-5.6.iso.torrent.zip
(27.54 KiB) Downloaded 333 times

User avatar
for_wov
Posts: 25
Joined: Fri 10 May 2013, 06:43
Location: Europe:Kiev

multiple sound cards

#87 Post by for_wov »

have 2 sound cards. alsawizard choses the right one but retrovol is not properly affected ie. shows hw0 instead hw1 (in my case). doesnt work even on rebooting/making savefile. solution right click sound icon in tray=>cofig window=>hardware replacing hw:0 to hw:1 manually then enabling speaker and other items works. on previous precise (5.5.92 or 93 dont remember)worked OOTB.

User avatar
BarryK
Puppy Master
Posts: 9392
Joined: Mon 09 May 2005, 09:23
Location: Perth, Western Australia
Contact:

Re: Precise Puppy 5.6-FINAL

#88 Post by BarryK »

OscarTalks wrote:
peebee wrote:Like ETP I had to blacklist nouveau before nvidia 304.88 from an sfs produced by getnvidia 0.9.1 pet would work - xorgwizard did not offer nvidia as a possibility
If you run the proprietary nvidia installer it detects if nouveau is loaded. It gives an error but it offers to install a small file into /etc/modprobe.d to disable nouveau for you (on reboot) so the driver can be installed on the second try.

When I was tinkering with making a .pet of the nvidia 173.14.37 driver for Dpup Wheezy I opted to place this disabler file in the .pet along with the message telling the user to reboot. On reboot nouveau has been disabled and xorg wizard offers the nvidia driver.

Uninstallation removes this file and restores nouveau availability.

I am still not sure if this is the best way. I guess nouveau becomes permanently unavailable while ever nvidia driver is installed but theoretically you don't need it any more. There used to be a nouveau unloader in the old xorg wizard but has that mechanism been changed now?

If the switch can't be done without a reboot (?) then a reboot followed by a run of xorg wizard is just about as smooth as it can get I guess.
I have fixed xorgwizard so that it does offer the nvidia driver, however I do need to know one thing:

Could you please tell me, when the official nvidia installer offers to blacklist the nouveau kernel driver, and you accept, what is the name of the file it creates in /etc/modprobe.d, and what is it's exact content?
[url]https://bkhome.org/news/[/url]

User avatar
BarryK
Puppy Master
Posts: 9392
Joined: Mon 09 May 2005, 09:23
Location: Perth, Western Australia
Contact:

Re: multiple sound cards

#89 Post by BarryK »

for_wov wrote:have 2 sound cards. alsawizard choses the right one but retrovol is not properly affected ie. shows hw0 instead hw1 (in my case). doesnt work even on rebooting/making savefile. solution right click sound icon in tray=>cofig window=>hardware replacing hw:0 to hw:1 manually then enabling speaker and other items works. on previous precise (5.5.92 or 93 dont remember)worked OOTB.
That's interesting. Precise 5.6 has retrovol 0.13 from the creator pizzasgood, whereas previous pups have 0.12.

Perhaps we need a consensus on whether 0.12 is actually better?

Note, you can get 0.12 from here:

http://distro.ibiblio.org/quirky/pet_pa ... l-0.12.pet
[url]https://bkhome.org/news/[/url]

oui

#90 Post by oui »

Hi

Precise 5.6 works very fine on my 2 PCs.

One detail would be interesting to search a consensus: The libflashplayer.so is 5 Mb smaller but old and doesn't really allow to access to all purposes offered by flashplayer. So considered are only 12 Mb to much where 17 Mb would work perfectly :wink: ...
As divers guy's prefer other browser (I am a Seamonkey fan since Mozilla did come into Puppy), it would probably be better to split the main *sfs and always add browser + flashplayer separately!

(Perhaps a start point for a new concept, a modular Puppy? With a main *sfs with one, internet pack, or two modules, internet pack + office pack separately as all that are really heavy applications needing much room in the ISO and are never used if you don't adhere to the choice)

Kind regards

backi
Posts: 1922
Joined: Sun 27 Feb 2011, 22:00
Location: GERMANY

How to avoid savings to Usb Flash.

#91 Post by backi »

Hi !!

How to avoid savings to Usb Flash.

Found another solution for problem---installing pets, debs or downloads from PPmanager and--- „ not to save them to USB Flash on demand, without spoiling PPmanager „--- Works for Puppy Precise ,(,probably on Raring too .did not test yet )

1.Download somewhere the script „nosaveshutdown „ make it executable .

2. Goto Puppy Event Manager > Save Session > Save interval (0=never )
Save to flash....Restart

3.Install petget20120418.pet from
http://shino.pos.to/linux/puppy/

Save to flash ..restart
Now you can install pets debs or downloads from PPmanager without spoiling it..If you like to keep them
either use „save2flash „ during session without shutting down ,
or saving session at shutdown ..just shutdown as usual session will be saved.

In case you dont want to save Changes /session ...just execute the script above „nosaveshutdown“ . Nothing will be saved to Flash .This works for me onPrecise Puppy 5.6 . Probobly on UPUP RARING too (did not test it yet)

Install petget20120418.pet from
http://shino.pos.to/linux/puppy/

User avatar
OscarTalks
Posts: 2196
Joined: Mon 06 Feb 2012, 00:58
Location: London, England

Re: Precise Puppy 5.6-FINAL

#92 Post by OscarTalks »

BarryK wrote:I have fixed xorgwizard so that it does offer the nvidia driver, however I do need to know one thing:

Could you please tell me, when the official nvidia installer offers to blacklist the nouveau kernel driver, and you accept, what is the name of the file it creates in /etc/modprobe.d, and what is it's exact content?
Hello BarryK,

The file is named nvidia-installer-disable-nouveau.conf

and just contains:-

Code: Select all

# generated by nvidia-installer
blacklist nouveau
options nouveau modeset=0
Oscar in England
Image

User avatar
666philb
Posts: 3615
Joined: Sun 07 Feb 2010, 12:27
Location: wales ... by the sea

#93 Post by 666philb »

i made some pets of the amd graphic drivers for precise 5.6..... first one's for modern cards, second for older legacy cards. i can't test the legacy driver as i don't have the right card. let me know if it's ok

http://www.wuala.com/666philb/Documents ... .2.44.pet/ 55mb
MD5 88aaab74dd218a3a874cbd98f4b2de5f

http://www.wuala.com/666philb/Documents ... .2.44.pet/55mb
MD5 919fdf82fddc7b3e8412942c5c0bf1df
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331

User avatar
shinobar
Posts: 2672
Joined: Thu 28 May 2009, 09:26
Location: Japan
Contact:

getnvidia-0.9.2

#94 Post by shinobar »

For the Nvidia driver for Precise Puppy 5.6, try getnvidia-0.9.2.
# 22may2013: fix NVIDIA-*.run check (thanks to peebee)
# 23may2012: fix disablenouveau (thanks to peebee)
http://www.murga-linux.com/puppy/viewtopic.php?t=72405
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]

User avatar
L18L
Posts: 3479
Joined: Sat 19 Jun 2010, 18:56
Location: www.eussenheim.de/

/usr/sbin/loginmanager

#95 Post by L18L »

robwoj44 has not been able to let fido change back to login as root, see http://murga-linux.com/puppy/viewtopic. ... 4&start=45

I have found that

Code: Select all

#  echo "$ADMINPASSWORD" | su root
does not work at all. fido stays fido.

So I tried our (good old :idea: ) sudo -A ${0} ${@} ...
... and it works.

Code: Select all

#!/bin/sh
#note, root2user called via shutdownconfig, changes root to fido.
#110507 TaZOC bug fix.
#120201 rodin.s: internationalized.
#120323 replace 'xmessage' with 'pupmessage'.
#120409 if using minit instead of busybox init.
#130523 L18L: HOMEUSER, sudo, without ADMINPASSWORD

export TEXTDOMAIN=loginmanager
export TEXTDOMAINDIR=/usr/share/locale
export OUTPUT_CHARSET=UTF-8

#HOMEUSER="`whoami`"
[ "`whoami`" != "root" ] && exec sudo -A ${0} ${@} #130523
HOMEUSER="`grep autologin /etc/inittab | cut -d ' ' -f3`" #130523
[ $HOMEUSER ] || HOMEUSER=$USER #130523

CHANGE2ROOT=""
if [ "$HOMEUSER" != "root" ];then # without ADMINPASSWORD
 CHANGE2ROOT="<text><label>$(gettext 'However, if you wish, you can change to the administrator (root) permanently on the next boot. Just tick this box and it will be so:')</label></text>
  <checkbox>
   <label>$(gettext 'Tick box to become administrator permanently')</label>
   <default>false</default>
   <variable>CHECKADMIN</variable>
  </checkbox>
 <text><label>$(gettext 'This will take affect after reboot.')</label></text>
 "

fi

export MAIN_DIALOG="
<window title=\"LoginManager\" icon-name=\"gtk-execute\">
 <vbox>
  <text use-markup=\"true\"><label>\"<b>$(gettext 'Currently you are logged in as') '${HOMEUSER}'</b>\"</label></text>
  
  ${CHANGE2ROOT}
  
  <hbox>
   <button ok></button>
   <button cancel></button>
  </hbox>
 </vbox>
</window>
"

RETSTRING="`gtkdialog3 --program=MAIN_DIALOG --center`"
[ $? -ne 0 ] && exit

#echo "$RETSTRING"
eval "$RETSTRING"
[ "$EXIT" != "OK" ] && exit

#if [ "$CHANGE2ROOT" != "" ];then
 if [ "$CHECKADMIN" = "true" ];then
  # echo "$ADMINPASSWORD" | su root #130523
  #if [ $? -ne 0 ];then
  # pupmessage -bg red -title "$(gettext 'LoginManager: error')" -center "$(gettext 'Sorry, admin password is wrong')"
  # exit
  #fi #130523
  rootEXPR="s%^tty1.*%tty1::respawn:/sbin/mingetty --autologin root tty1%"
  sed -i -e "$rootEXPR" /etc/inittab #110507 TaZOC bug fix.
  
  #120409 if using minit instead of busybox init...
  if [ -f /etc/minit/getty/1/params  ];then #see my minit pet pkg.
   EXPR2='s%^fido$%root%'
   sed -i -e "$EXPR2" /etc/minit/getty/1/params
  fi
  pupmessage -bg green -center -title "$(gettext 'Login Manager: OK')" "$(gettext 'Ok, you will be administrator at next boot')"
 fi
#fi

User avatar
BarryK
Puppy Master
Posts: 9392
Joined: Mon 09 May 2005, 09:23
Location: Perth, Western Australia
Contact:

Re: Precise Puppy 5.6-FINAL

#96 Post by BarryK »

OscarTalks wrote:
BarryK wrote:I have fixed xorgwizard so that it does offer the nvidia driver, however I do need to know one thing:

Could you please tell me, when the official nvidia installer offers to blacklist the nouveau kernel driver, and you accept, what is the name of the file it creates in /etc/modprobe.d, and what is it's exact content?
Hello BarryK,

The file is named nvidia-installer-disable-nouveau.conf

and just contains:-

Code: Select all

# generated by nvidia-installer
blacklist nouveau
options nouveau modeset=0
Thanks for that. I think now the xorgwizard is friendly toward the NVIDIA driver when it is installed, see my blog post:

http://bkhome.org/blog2/?viewDetailed=00256
[url]https://bkhome.org/news/[/url]

User avatar
peebee
Posts: 4370
Joined: Sun 21 Sep 2008, 12:31
Location: Worcestershire, UK
Contact:

#97 Post by peebee »

In parallel with BK's changes for nvidia described here, Shinobar has released getnvidia 0.9.2 which creates an sfs which loads successfully onto the current Precise 5.6 and after a reboot the nvidia driver is being used and also is displayed as an option by xorgwizard.

Hopefully the changes made by BK and Shinobar will prove to be complementary....

Cheers
peebee
ImageLxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64

nooby
Posts: 10369
Joined: Sun 29 Jun 2008, 19:05
Location: SwedenEurope

#98 Post by nooby »

I guess I can read more about this on Barry's log or the announcement part of the forum?

"including a new X.Org video wizard (with forced-reboot recovery mechanism),"

obviously I have not payed attention.

has there been changes since 5.5.94 or are these twins
only that it became the official
I use Google Search on Puppy Forum
not an ideal solution though

User avatar
Billtoo
Posts: 3720
Joined: Tue 07 Apr 2009, 13:47
Location: Ontario Canada

Precise Puppy 5.6-final, May 21, 2013

#99 Post by Billtoo »

Manual frugal install to a 16gb SDHC card which is plugged into a usb
card reader, running on a Compaq desktop pc.

video-info-glx 1.5.3 Thu 23 May 2013 on Precise Puppy 5.6 Linux 3.2.44 i686
0.0 VGA compatible controller: NVIDIA Corporation GF108
[GeForce GT 430] (rev a1)
oem: NVIDIA
product: GF108 Board - 1071v1p1 Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.11.3
dimensions: 1280x1024 pixels (382x302 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce GT 430/PCIe/SSE2
OpenGL version string: 4.3.0 NVIDIA 319.23
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
302 frames in 5.0 seconds = 60.396 FPS
301 frames in 5.0 seconds = 60.020 FPS
301 frames in 5.0 seconds = 60.020 FPS
#
Pentium(R) Dual-Core CPU E5200 @ 2.50GHz
Core 0: @1200 1: @1200 MHz
Compact Wireless-G USB Adapter
I installed the proprietary Nvidia driver for my graphics card.
Installed lots of applications with ppm.
Precise 5.6 is working well, no problems.
Attachments
screenshot.jpg
(45.26 KiB) Downloaded 1652 times

User avatar
lvds
Posts: 340
Joined: Tue 23 Jan 2007, 15:15
Location: Near the window

#100 Post by lvds »

Hi Barry,

I've tested the new xorg crash recovery mechanism (as explained here)
The Woof-level notes above state that this pup has a new Xorg Video Wizard and a "recovery mechanism". if you bootup and do not get a graphical desktop, and the keyboard/mouse have hung, which can happen with some troublesome old video hardware, press the 'reset' button on the PC or hold down the 'power' button for 4 seconds to force a shutdown -- at next startup the "recovery mechanism" kicks in, forcing the Xorg Video Wizard to run. Then, you can try an alternate Xorg driver.
As this is a new feature, I welcome feedback, especially tweaks for the /usr/sbin/xorgwizard-cli script, if you know Bash coding!
...tested on my Asus 1225c which is equiped with Atom cedar trails. And it does not work for me. At first pass: black screen. Reboot. Second pass: black screen.

So far, the only puppies that could boot were Racy v5.5 and upup-precise 3.8.3. These two boots into 1024x768. Then when running xorg video wizard manually and ask for a probe, will allow the 1366x768 ; Important to note: the screen in text mode to chose between probe, test... is too big and goes out of the screen ! So you need to type in blind (enter the first time, because hopefully this is the default, then enter again when the screen resolution is selected) because you don't see the buttons. It seems the issue is common and most people when having video problems get down to 1024x768 so maybe it would be good to adapt the message for that size so anyone can see the buttons to press.

Best regards
Laurent

Post Reply