Ok, removed from Precise.L18L wrote:See screenshot
Note,
I did not really want to "run as root"
Unticked "run as root" I did not see any output of that command.
Ticking "run in terminal" makes no difference.
If I am running in terminal I do not need gexec at all.
So I am voting for "remove gexec from puppy" unless someone enlightened me how to use gexec
Precise Puppy 5.6.1-final, May 29, 2013
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Re: gexec bug
[url]https://bkhome.org/news/[/url]
1. Booting Precise-5.6 from CD-RW, with precisesave.3fs.
All looking good, and working well so far.
Looks like I'll be switching from Slacko to this as my number-1 Puppy.
2. Tweaks made so far:
a. Changes made so as to be able to choose if/when to save session changes back to the precisesave file.
b. Installed "Firefox-16.0.1-i686-up.
c. Installed PupsaveHotbackup-1.3.
d. Installed wine-1.4.
e. Updated PPM.
f. Installed thunderbird_17.0.6+build1.
g. Installed FoxitReader-1.1.0.
h. CUPS used to install "HP Desjet 840c".
i. Installed PupClockset-1.6.
j. /root/.jwmrc-tray edit to change xload display.
k. Installed pupsnap-2.1_scrot-0.8_32bit.
l. Installed smm-1.0.pup.
m. Thunderbird_17.0.6+build1 set up to use common profile held in /mnt/home/Mail.
n. Fixed Xfe "Open with..." problem [workaround].
All looking good, and working well so far.
Looks like I'll be switching from Slacko to this as my number-1 Puppy.
2. Tweaks made so far:
a. Changes made so as to be able to choose if/when to save session changes back to the precisesave file.
b. Installed "Firefox-16.0.1-i686-up.
c. Installed PupsaveHotbackup-1.3.
d. Installed wine-1.4.
e. Updated PPM.
f. Installed thunderbird_17.0.6+build1.
g. Installed FoxitReader-1.1.0.
h. CUPS used to install "HP Desjet 840c".
i. Installed PupClockset-1.6.
j. /root/.jwmrc-tray edit to change xload display.
k. Installed pupsnap-2.1_scrot-0.8_32bit.
l. Installed smm-1.0.pup.
m. Thunderbird_17.0.6+build1 set up to use common profile held in /mnt/home/Mail.
n. Fixed Xfe "Open with..." problem [workaround].
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Precise Puppy 5.6.1 has been released, see announcement:
http://bkhome.org/blog2/?viewDetailed=00275
Have fun!
http://bkhome.org/blog2/?viewDetailed=00275
Have fun!
[url]https://bkhome.org/news/[/url]
- ASRI éducation
- Posts: 3197
- Joined: Sat 09 May 2009, 12:10
- Location: France
- Contact:
Merci Barry.BarryK wrote:Precise Puppy 5.6.1 has been released, see announcement:
http://bkhome.org/blog2/?viewDetailed=00275
Have fun!
Ongoing Sound Problems
Every Precise I've tried exhibits the same behavior. Either the kernel, Alsa or Retrovol do not work with my Intel audio chip
Processor : 8x Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz
Audio Adapter : HDA-Intel - HDA Intel PCH
snd_hda_intel : Intel HDA driver
snd_hda_codec : HDA codec core
snd_hwdep : Hardware dependent layer
snd_pcm_oss : PCM OSS emulation for ALSA.
snd_mixer_oss : Mixer OSS emulation for ALSA.
snd_pcm : Midlevel PCM code for ALSA.
snd_seq_dummy : ALSA sequencer MIDI-through client
snd_seq_oss : OSS-compatible sequencer module
snd_seq_midi : Advanced Linux Sound Architecture sequencer MIDI synth.
snd_seq_midi_event : MIDI byte <-> sequencer event coder
snd_rawmidi : Midlevel RawMidi code for ALSA.
snd_seq : Advanced Linux Sound Architecture sequencer.
snd_seq_device : ALSA sequencer device management
snd_timer : ALSA timer interface
shpchp : Standard Hot Plug PCI Controller Driver
snd : Advanced Linux Sound Architecture driver for soundcards.
soundcore : Core sound module
PCI bridge : Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode])
PCI bridge : Intel Corporation Panther Point PCI Express Root Port 5 (rev c4) (prog-if 00 [Normal decode])
When precise first boots, it does not recognize the sound chip, when I finally tick the front box in retrovol, I get sound, but not speaker icon.
Upon reboot, the settings for retrovol are not saved.
I've tried every option that alsa and retrovol offer for configuration.
What's really interesting is that Raring and Upup recognize the sound ship, the speaker icon is not muted as it is in Precise.
It seems that the "stock" precise distributions have the problem, while non-stock ones do not.
I'd rslly appreciate some help with this.
thanks
Thom
Processor : 8x Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz
Audio Adapter : HDA-Intel - HDA Intel PCH
snd_hda_intel : Intel HDA driver
snd_hda_codec : HDA codec core
snd_hwdep : Hardware dependent layer
snd_pcm_oss : PCM OSS emulation for ALSA.
snd_mixer_oss : Mixer OSS emulation for ALSA.
snd_pcm : Midlevel PCM code for ALSA.
snd_seq_dummy : ALSA sequencer MIDI-through client
snd_seq_oss : OSS-compatible sequencer module
snd_seq_midi : Advanced Linux Sound Architecture sequencer MIDI synth.
snd_seq_midi_event : MIDI byte <-> sequencer event coder
snd_rawmidi : Midlevel RawMidi code for ALSA.
snd_seq : Advanced Linux Sound Architecture sequencer.
snd_seq_device : ALSA sequencer device management
snd_timer : ALSA timer interface
shpchp : Standard Hot Plug PCI Controller Driver
snd : Advanced Linux Sound Architecture driver for soundcards.
soundcore : Core sound module
PCI bridge : Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode])
PCI bridge : Intel Corporation Panther Point PCI Express Root Port 5 (rev c4) (prog-if 00 [Normal decode])
When precise first boots, it does not recognize the sound chip, when I finally tick the front box in retrovol, I get sound, but not speaker icon.
Upon reboot, the settings for retrovol are not saved.
I've tried every option that alsa and retrovol offer for configuration.
What's really interesting is that Raring and Upup recognize the sound ship, the speaker icon is not muted as it is in Precise.
It seems that the "stock" precise distributions have the problem, while non-stock ones do not.
I'd rslly appreciate some help with this.
thanks
Thom
Precise Puppy 5.6.1-final, May 29, 2013
I did a fresh manual frugal install of 561 to a 16gb SDHC card.
video-info-glx 1.5.3 Wed 29 May 2013 on Precise Puppy 5.6.1 Linux 3.2.44 i686
2.0 VGA compatible controller:
Intel Corporation Ivy Bridge Graphics Controller (rev 09)
oem: Intel(R) Sandybridge/Ivybridge Graphics Chipset Accelerated VGA BIOS
product:
Intel(R) Sandybridge/Ivybridge Graphics Controller Hardware Version 0.0
X Server: Xorg Driver: intel
X.Org version: 1.11.3
dimensions: 1280x1024 pixels (338x270 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Desktop x86/MMX/SSE2
OpenGL version string: 2.1 Mesa 8.0.4
Intel(R) Core(TM) i5-3550 CPU @ 3.30GHz
Core 0: @1600 1: @1600 2: @1600 3: @1600 MHz
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
303 frames in 5.0 seconds = 60.456 FPS
301 frames in 5.0 seconds = 60.020 FPS
301 frames in 5.0 seconds = 60.020 FPS
#
Network controller Ralink corp. RT5390 Wireless 802.11n 1T/1R PCIe
I updated ppm and then installed firefox-21, I installed kdegames and
digikam-2.50 as well.
I used getflash to install the latest flashplayer plugin.
Once kdegames or digikam are installed you get an error if you try to
change the password for spot or root.
Digikam created a menu entry under graphics but clicking on it doesn't
launch digikam, in 5.6 I was using gexec to launch digikam but it's
not included in 5.6.1 so I made a pet of grun-0.93 and it works fine.
I fiddled with the digikam desktop file but couldn't get it to start
from the menu icon.
That's it so far.
video-info-glx 1.5.3 Wed 29 May 2013 on Precise Puppy 5.6.1 Linux 3.2.44 i686
2.0 VGA compatible controller:
Intel Corporation Ivy Bridge Graphics Controller (rev 09)
oem: Intel(R) Sandybridge/Ivybridge Graphics Chipset Accelerated VGA BIOS
product:
Intel(R) Sandybridge/Ivybridge Graphics Controller Hardware Version 0.0
X Server: Xorg Driver: intel
X.Org version: 1.11.3
dimensions: 1280x1024 pixels (338x270 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Desktop x86/MMX/SSE2
OpenGL version string: 2.1 Mesa 8.0.4
Intel(R) Core(TM) i5-3550 CPU @ 3.30GHz
Core 0: @1600 1: @1600 2: @1600 3: @1600 MHz
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
303 frames in 5.0 seconds = 60.456 FPS
301 frames in 5.0 seconds = 60.020 FPS
301 frames in 5.0 seconds = 60.020 FPS
#
Network controller Ralink corp. RT5390 Wireless 802.11n 1T/1R PCIe
I updated ppm and then installed firefox-21, I installed kdegames and
digikam-2.50 as well.
I used getflash to install the latest flashplayer plugin.
Once kdegames or digikam are installed you get an error if you try to
change the password for spot or root.
Digikam created a menu entry under graphics but clicking on it doesn't
launch digikam, in 5.6 I was using gexec to launch digikam but it's
not included in 5.6.1 so I made a pet of grun-0.93 and it works fine.
I fiddled with the digikam desktop file but couldn't get it to start
from the menu icon.
That's it so far.
- Attachments
-
- passwd.jpg
- (10.69 KiB) Downloaded 2163 times
-
- digikamscrn.jpg
- (83.78 KiB) Downloaded 2104 times
-
- grun-0.9.3-i686.pet
- (20.73 KiB) Downloaded 480 times
Precise Puppy version 5.6.1
So far all looking good on my E732 laptop. Manual frugal to ntfs partition and booting with grub4dos from an ext2 SDcard.
# uname -a
Linux puppypc20485 3.2.44 #1 SMP Sun May 5 11:42:44 GMT-8 2013 i686 i686 i386 GNU/Linux
# free
total used free shared buffers
Mem: 1805224 675724 1129500 0 73256
-/+ buffers: 602468 1202756
Swap: 0 0 0
#
Will use for a few days and report - feels faster than 5.6. My imagination ?
So far all looking good on my E732 laptop. Manual frugal to ntfs partition and booting with grub4dos from an ext2 SDcard.
# uname -a
Linux puppypc20485 3.2.44 #1 SMP Sun May 5 11:42:44 GMT-8 2013 i686 i686 i386 GNU/Linux
# free
total used free shared buffers
Mem: 1805224 675724 1129500 0 73256
-/+ buffers: 602468 1202756
Swap: 0 0 0
#
Will use for a few days and report - feels faster than 5.6. My imagination ?
- Attachments
-
- Hinfo.tar.gz
- (8.09 KiB) Downloaded 463 times
[b]Asus[/b] 701SD. 2gig ram. 8gb SSD. [b]IBM A21m[/b] laptop. 192mb ram. PIII Coppermine proc. [b]X60[/b] T2400 1.8Ghz proc. 2gig ram. 80gb hdd. [b]T41[/b] Pentium M 1400Mhz. 512mb ram.
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
Re: Precise Puppy 5.6.1-final, May 29, 2013
Here are some alternatives to gexecBilltoo wrote:... in 5.6 I was using gexec to launch digikam but it's
not included in 5.6.1 ...
I like alienjeff's best
Re: Precise Puppy 5.6.1-final, May 29, 2013
Thanks for the info, I like grun bestL18L wrote:Here are some alternatives to gexecBilltoo wrote:... in 5.6 I was using gexec to launch digikam but it's
not included in 5.6.1 ...
I like alienjeff's best
- Attachments
-
- grunscrn.jpg
- (9.7 KiB) Downloaded 2111 times
-
- Posts: 1885
- Joined: Tue 05 Jun 2012, 12:17
- Location: Wisconsin USA
just like 5.6, 5.6.1's ppm refuses to update the ubuntu repos.
the connection stops here:
the connection stops here:
- Attachments
-
- capture27165.png
- Screenshot
- (4.76 KiB) Downloaded 52089 times
Last edited by bark_bark_bark on Wed 29 May 2013, 23:33, edited 1 time in total.
....
Precise 5.6
- booting FRUGAL from sda1 works, but not from sda5. It shows "puppy_precise_5.6.sfs not found. Dropping out to initial-ramdisk console". Same happens with racy or wary 5.5.
- When booting up, modules are being loaded, need to press any keyboard key, to have it continuing (usb keyboard).
- /root/Choices/MIME-types should be instead by default /root/.config/rox.sourceforge.net/MIME-types ?
- booting FRUGAL from sda1 works, but not from sda5. It shows "puppy_precise_5.6.sfs not found. Dropping out to initial-ramdisk console". Same happens with racy or wary 5.5.
- When booting up, modules are being loaded, need to press any keyboard key, to have it continuing (usb keyboard).
- /root/Choices/MIME-types should be instead by default /root/.config/rox.sourceforge.net/MIME-types ?
Full install to ext4 partition
Upgraded Seamonkey to 2.18 beta4
added
Xscreensaver-5.15
Shermans Aquarium
Firewall State 2.1
Pup control 2.3
Pup clockset 2.1
Roxterm 1.17
Wbar
Puppy Browser 1.1
Flashplayer 11.2.202.280
Bash 4.1
Bibletime 2.72
Audacious 3.23.2
Tcl 8.5.6
Tk 8.5.6
Everything working - no problems to report at this time
Upgraded Seamonkey to 2.18 beta4
added
Xscreensaver-5.15
Shermans Aquarium
Firewall State 2.1
Pup control 2.3
Pup clockset 2.1
Roxterm 1.17
Wbar
Puppy Browser 1.1
Flashplayer 11.2.202.280
Bash 4.1
Bibletime 2.72
Audacious 3.23.2
Tcl 8.5.6
Tk 8.5.6
Everything working - no problems to report at this time
Precise 5.6 :
- dmesg sometimes shows with AMD Athlon 7750 dual-core :
Don't ask me how to reproduce or where it comes from, I have no idea...
- dmesg sometimes shows with AMD Athlon 7750 dual-core :
Code: Select all
[ 499.142794] INFO: rcu_sched detected stall on CPU 0 (t=18559 jiffies)
[ 499.142799] Pid: 0, comm: swapper/0 Not tainted 3.2.44 #1
[ 499.142801] Call Trace:
[ 499.142809] [<c104f416>] ? __rcu_pending+0x5f/0x2ab
[ 499.142813] [<c104fcfe>] ? rcu_check_callbacks+0x6a/0x95
[ 499.142817] [<c102d8c3>] ? update_process_times+0x2a/0x53
[ 499.142820] [<c1042977>] ? tick_sched_timer+0x5c/0x89
[ 499.142824] [<c1039b89>] ? __run_hrtimer.isra.25+0x3a/0x87
[ 499.142828] [<c103a317>] ? hrtimer_interrupt+0xdd/0x1d4
[ 499.142831] [<c1014380>] ? smp_apic_timer_interrupt+0x64/0x73
[ 499.142835] [<c132053a>] ? apic_timer_interrupt+0x2a/0x30
[ 499.142838] [<c100790a>] ? default_idle+0x19/0x28
[ 499.142840] [<c1007a21>] ? amd_e400_idle+0xa7/0xbe
[ 499.142843] [<c10015ab>] ? cpu_idle+0x4f/0x69
[ 499.142845] [<c147d64c>] ? start_kernel+0x28e/0x291
Precise 5.6 :
Missing libraries :
Missing libraries :
Code: Select all
# /usr/bin/spumux
/usr/bin/spumux: error while loading shared libraries: libpng14.so.14: cannot open shared object file: No such file or directory
# /sbin/nfnl_osf
/sbin/nfnl_osf: error while loading shared libraries: libnfnetlink.so.0: cannot open shared object file: No such file or directory
Quick_pet Precise 1.2 (from 25 May 2013)
See first post in this thread:spandey wrote:Now that Precise is almost stable, it will be nice to have a QuickPet available for Precise pointing to Precise Pets in ibiblio.org.
http://www.murga-linux.com/puppy/viewto ... 486#705486
Regards ETP
[url=http://tinyurl.com/pxzq8o9][img]https://s17.postimg.cc/tl19y14y7/You_Tube_signature80px.png[/img][/url]
[url=http://tinyurl.com/kennels2/]Kennels[/url]
[url=http://tinyurl.com/pxzq8o9][img]https://s17.postimg.cc/tl19y14y7/You_Tube_signature80px.png[/img][/url]
[url=http://tinyurl.com/kennels2/]Kennels[/url]