Precise Puppy 5.6.1-final, May 29, 2013
- goolwa_pup
- Posts: 59
- Joined: Thu 29 Oct 2009, 20:31
precise hangs on detecting optical input
precise puppy 5.6.1 hangs on detecting optical input when booting
as reported on precise 5.4.3
as reported on precise 5.5
as reported on precise 5.4.3
as reported on precise 5.5
Hi i am wondering if there is a version of xfce that will run on this Precise Puppy. I have started a thread about xfce click here to view and follow it.
hi hideho ... not a 100% working but mostly http://www.wuala.com/666philb/Documents ... _sfs4.sfs/HiDeHo wrote:Hi i am wondering if there is a version of xfce that will run on this Precise Puppy. I have started a thread about xfce click here to view and follow it.
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
goolwa_pup, I have a machine that sometimes hangs during
startup with that "optical input" message on screen. This started
happening with several recent pups. I found that I could work
around the problem by putting "pfix=nox" on the kernel line. Then
once I set up the video driver and created a personal Save file,
I could get rid of the "pfix=nox" and everything would be ok.
I just found that Barry's Raring 5.6.92 alpha doesn't doesn't tend
to hang on the initial startup. Instead, I'm offered keyboard, video
and time zone selections. It may be that pups using his latest woof
will be free of the hang problem.
Art
startup with that "optical input" message on screen. This started
happening with several recent pups. I found that I could work
around the problem by putting "pfix=nox" on the kernel line. Then
once I set up the video driver and created a personal Save file,
I could get rid of the "pfix=nox" and everything would be ok.
I just found that Barry's Raring 5.6.92 alpha doesn't doesn't tend
to hang on the initial startup. Instead, I'm offered keyboard, video
and time zone selections. It may be that pups using his latest woof
will be free of the hang problem.
Art
-
- Posts: 1885
- Joined: Tue 05 Jun 2012, 12:17
- Location: Wisconsin USA
I have decided to run Precise Puppy 561 again on my Acer Aspire One D257 netbook (you could say this is my main PC).
I had set up my wifi connection, as usual I,
But it did not connect. the wireless light on my netbook was on, but i could not connect to any site. I rebooted, tried again and same thing. I tried Frisbee, but with no luck either.
I had set up my wifi connection, as usual I,
Code: Select all
1.) Run Dougal's Network Wizard
2.)Select wlan0
3.)It asks about the wl module not in the wpa_suppliant list, and as usual I allow it to add the entry.
4.)Press Scan
5.)Select the network
6.)Select Open, WEP, WPA/TSIK, or WPA2 (depends on network)
7.)type in password (if needed)
8.)Press 'save' and then 'use this profile'
9.)Connects to network.
10.) Then I press DHCP.
11.) Done
....
- goolwa_pup
- Posts: 59
- Joined: Thu 29 Oct 2009, 20:31
thanx artsown .....I will give it a go....however this issue really needs to be addressed by the developers....artsown wrote:goolwa_pup, I have a machine that sometimes hangs during
startup with that "optical input" message on screen. This started
happening with several recent pups. I found that I could work
around the problem by putting "pfix=nox" on the kernel line. Then
once I set up the video driver and created a personal Save file,
I could get rid of the "pfix=nox" and everything would be ok.
I just found that Barry's Raring 5.6.92 alpha doesn't doesn't tend
to hang on the initial startup. Instead, I'm offered keyboard, video
and time zone selections. It may be that pups using his latest woof
will be free of the hang problem.
Art
Hi bark_bark_barkbark_bark_bark wrote: 2.)Select wlan0
3.)It asks about the wl module
But it did not connect. the wireless light on my netbook was on, but i could not connect to any site. I rebooted, tried again and same thing. I tried Frisbee, but with no luck either.
1. issue this command in a terminal to determine which chip you have
Code: Select all
lspci -vnn -d 14e4:
3. blacklist wl and reboot to see if a different driver works
4. follow the instructions to do a manual wifi setup at http://www.murga-linux.com/puppy/viewtopic.php?t=22469 and note any error messages
5. if all that fails, run pdiag in a terminal and post/pm the tarball created
6. report if any of the above gives you success
Cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
- goolwa_pup
- Posts: 59
- Joined: Thu 29 Oct 2009, 20:31
hangs on recognising optical device
I gave it a go and yes it worked........then found poweroff doesnt work from menu...poweroffed from terminal...rebooted.... ....and found it was still hanging on booting at recognising optical devices.....went into Lucid Puppy and found there was a save file 2fs created by precise even though i didnt see anything asking for one as it was shutdown from terminal....anyway I have had a look.... didnt like.... and will stick with Lupu for now thanxgoolwa_pup wrote:thanx artsown .....I will give it a go....however this issue really needs to be addressed by the developers....artsown wrote:goolwa_pup, I have a machine that sometimes hangs during
startup with that "optical input" message on screen. This started
happening with several recent pups. I found that I could work
around the problem by putting "pfix=nox" on the kernel line. Then
once I set up the video driver and created a personal Save file,
I could get rid of the "pfix=nox" and everything would be ok.
I just found that Barry's Raring 5.6.92 alpha doesn't doesn't tend
to hang on the initial startup. Instead, I'm offered keyboard, video
and time zone selections. It may be that pups using his latest woof
will be free of the hang problem.
Art
quicksetup: hyphenated time zones don't work.
When a user chooses a time zone containing a hyphen, quicksetup converts the hyphen to a plus sign. So, for instance, if the user selects "America/Port-au-Prince", quicksetup sets /etc/localtime to point to /usr/share/zoneinfo/America/Port+au+Prince, a file that doe not exist.
Here is one possible patch (based on quicksetup 2013-05-13 07:52:17 in Woof):
Here is one possible patch (based on quicksetup 2013-05-13 07:52:17 in Woof):
Code: Select all
diff -ur old/quicksetup new/quicksetup
--- old/quicksetup 2013-06-23 15:40:55.476286475 +0000
+++ new/quicksetup 2013-06-23 16:09:59.396079466 +0000
@@ -422,10 +422,8 @@
CZONE='/usr/share/zoneinfo/Australia/Perth'
DEF_TIMEZONE='Australia/Perth'
fi
- if [ "`echo -n "$DEF_TIMEZONE" | grep 'GMT' | grep '\+'`" = "" ];then #fix sign.
- DEF_TIMEZONE="`echo -n "$DEF_TIMEZONE" | sed -e 's%Etc/%%' | tr "\-" "\+"`"
- else
- DEF_TIMEZONE="`echo -n "$DEF_TIMEZONE" | sed -e 's%Etc/%%' | tr "\+" "\-"`"
+ if echo -n "$DEF_TIMEZONE" | grep -q 'GMT';then #fix sign.
+ DEF_TIMEZONE="`echo -n "$DEF_TIMEZONE" | sed -e 's%Etc/%%' | tr "+-" "-+"`"
fi
xDEF_TIMEZONE="`echo -n "$DEF_TIMEZONE" | sed 's%GMT%GMT\\\\%'`" #the sign needs a \ in front. ex: GMT\+8
#note, screen out UTC timezone, causes confusion... 111103 screen more...
@@ -1337,10 +1335,8 @@
[ ! -e /etc/localtime ] && DEF_TIMEZONE="" #111027 precaution.
if [ "$DEF_TIMEZONE" != "$ZONERETVAL" -o "$HWCLOCKTIME" != "$NEW_HWCLOCKTIME" ];then
FLAG_CHANGED="${FLAG_CHANGED}${TT_tz2}:yes|"
- if [ "`echo -n "$ZONERETVAL" | grep 'GMT' | grep '\+'`" = "" ];then
- ZONERETVAL="`echo -n "$ZONERETVAL" | tr "\-" "\+"`"
- else
- ZONERETVAL="`echo -n "$ZONERETVAL" | tr "\+" "\-"`"
+ if echo -n "$ZONERETVAL" | grep -q 'GMT';then
+ ZONERETVAL="`echo -n "$ZONERETVAL" | tr "+-" "-+"`"
fi
[ "`echo "$ZONERETVAL" | grep 'GMT'`" != "" ] && ZONERETVAL="Etc/$ZONERETVAL"
#111103 these are also in Etc dir...
Wow, Great !
Still the GMT time setting on Puppy is WRONG !!
PERTH is GMT+8 !! NOT GMT-8 !!
http://wwp.greenwichmeantime.com/time-z ... lia/perth/
Still the GMT time setting on Puppy is WRONG !!
PERTH is GMT+8 !! NOT GMT-8 !!
http://wwp.greenwichmeantime.com/time-z ... lia/perth/
«Give me GUI or Death» -- I give you [[Xx]term[inal]] [[Cc]on[s][ole]] .
Macpup user since 2010 on full installations.
People who want problems with Puppy boot frugal :P
Macpup user since 2010 on full installations.
People who want problems with Puppy boot frugal :P
Downloaded the ISO of new Precise 5.6.1.
FRUGAL Installation on my desktop.
Everything is working fine.
teamviewer8 runs well without any issue.
Skype 4.2 working nicely.
Also installed wine (to use cisco packet tracer). Running nicely without any issue.
Keep it up Guys.
Posting the screenshot:
FRUGAL Installation on my desktop.
Everything is working fine.
teamviewer8 runs well without any issue.
Skype 4.2 working nicely.
Also installed wine (to use cisco packet tracer). Running nicely without any issue.
Keep it up Guys.
Posting the screenshot:
- Attachments
-
- screen2.jpg
- (136.37 KiB) Downloaded 632 times
This is definately nice on an old machine @ work. I also did an install to a USB thumbdrive with unetbootin. The problem is that Unetbootin put everything in the root directory of the thumbdrive and I would rather locate all of the Precise files in a directory. Does anyone have any idea how to do this and which system files need editing. Also, what would be the minimum amount of files in the root directory required for a boot after the Unetbootin install?
Hi Linuxbear:linuxbear wrote:This is definately nice on an old machine @ work. I also did an install to a USB thumbdrive with unetbootin. The problem is that Unetbootin put everything in the root directory of the thumbdrive and I would rather locate all of the Precise files in a directory. Does anyone have any idea how to do this and which system files need editing. Also, what would be the minimum amount of files in the root directory required for a boot after the Unetbootin install?
As suggested by the smokey01, You can use GRUB4DOS for that.
Here is the link where I post a detail that how to use your Flash Drive for Single or Multiple puppies in USB Drive. It will also work for your HDD (If you want to do.. ) http://murga-linux.com/puppy/viewtopic. ... 8&t=82373/
hope this will helps.
Thnx.
UMAIR
Precise Puppy 5.6.1-final, May 29, 2013
I did an install to a 4gb flash drive using unetbootin.
video-info-glx 1.5.3 Thu 27 Jun 2013 on Precise Puppy 5.6.1 Linux 3.2.44 i686
2.0 VGA compatible controller:
Intel Corporation Ivy Bridge Graphics Controller (rev 09)
oem: Intel(R) Sandybridge/Ivybridge Graphics Chipset Accelerated VGA BIOS
product:
Intel(R) Sandybridge/Ivybridge Graphics Controller Hardware Version 0.0
X Server: Xorg Driver: intel
X.Org version: 1.11.3
dimensions: 1280x1024 pixels (338x270 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Desktop x86/MMX/SSE2
OpenGL version string: 2.1 Mesa 8.0.4
Intel(R) Core(TM) i5-3550 CPU @ 3.30GHz
Core 0: @1600 1: @1600 2: @1600 3: @1600 MHz
I added a few applications with ppm including firefox-22,kdegames, and xbmc.
video-info-glx 1.5.3 Thu 27 Jun 2013 on Precise Puppy 5.6.1 Linux 3.2.44 i686
2.0 VGA compatible controller:
Intel Corporation Ivy Bridge Graphics Controller (rev 09)
oem: Intel(R) Sandybridge/Ivybridge Graphics Chipset Accelerated VGA BIOS
product:
Intel(R) Sandybridge/Ivybridge Graphics Controller Hardware Version 0.0
X Server: Xorg Driver: intel
X.Org version: 1.11.3
dimensions: 1280x1024 pixels (338x270 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Desktop x86/MMX/SSE2
OpenGL version string: 2.1 Mesa 8.0.4
Intel(R) Core(TM) i5-3550 CPU @ 3.30GHz
Core 0: @1600 1: @1600 2: @1600 3: @1600 MHz
I added a few applications with ppm including firefox-22,kdegames, and xbmc.
- Attachments
-
- screenshot.jpg
- (58.42 KiB) Downloaded 1285 times
OK. I will backup, then boot and move all to a folder. It sounds like I can use G4D and then when the machine reboots. I can point the sfs request to the new directory.umair wrote: Hi Linuxbear:
As suggested by the smokey01, You can use GRUB4DOS for that.
Here is the link where I post a detail that how to use your Flash Drive for Single or Multiple puppies in USB Drive. It will also work for your HDD (If you want to do.. ) http://murga-linux.com/puppy/viewtopic. ... 8&t=82373/
hope this will helps.
Thnx.
UMAIR
Thanks!
Giraffe Dialogs
Precise 5.61 is speedy and smooth on my eeepc 901. Most items work right away. Sound is great, the touchpad works perfectly, and so on.
The video ... not so much. I'm having trouble with some of the dialogs in Puppy and its programs. They don't seem to fit the 1024 x 600 screen very well.
For example, after examining dependencies in PPM, the Install button is off the bottom of the screen. I can just barely see the top of it if I drag the window as far to the top as I can.
Another example - the preferences dialog in Geany, where the Save button is completely invisible. Again, I can drag the window to the very top of the screen and see just the top of the button. Couldn't read the buttons though, so I had to open the dialog on another computer to see which button to click. And now the dialog is stuck at the top of the screen; I can't grab its title bar to drag it down.
I've run into this problem in several other places, too.
Any idea what can be done? Unfortunately pupeee doesn't seem to be very current.
Thanks for any help you can provide!
The video ... not so much. I'm having trouble with some of the dialogs in Puppy and its programs. They don't seem to fit the 1024 x 600 screen very well.
For example, after examining dependencies in PPM, the Install button is off the bottom of the screen. I can just barely see the top of it if I drag the window as far to the top as I can.
Another example - the preferences dialog in Geany, where the Save button is completely invisible. Again, I can drag the window to the very top of the screen and see just the top of the button. Couldn't read the buttons though, so I had to open the dialog on another computer to see which button to click. And now the dialog is stuck at the top of the screen; I can't grab its title bar to drag it down.
I've run into this problem in several other places, too.
Any idea what can be done? Unfortunately pupeee doesn't seem to be very current.
Thanks for any help you can provide!