pBurn 4.3.19

Audio editors, music players, video players, burning software, etc.
Message
Author
User avatar
zigbert
Posts: 6621
Joined: Wed 29 Mar 2006, 18:13
Location: Valåmoen, Norway
Contact:

#1981 Post by zigbert »

Version 4.0.1
See main post

Changelog
- Activate rubber-banding in file-browser
- Syntax improvements in help file. (thanks to don570)
- Bugfix: Dependency check shows missing gtkdialog

User avatar
otropogo
Posts: 764
Joined: Sat 24 Oct 2009, 15:17
Location: Montreal
Contact:

Pburn 4.0.1 won't run, uninstalling returns Pburn to v.3.5.2

#1982 Post by otropogo »

Have tried installing Pburn 4.0.1 a couple of times now. As usual with all of these installs, it places the temp file in root, ignoring my previous configuration., then gives a warning that only xxxMB are available (because I'm booting with a 2fs file).

After I move the temp directory to an adequate space on my hard drive, Pburn 4.01 puts a symlink in it and then refuses to open any more. when I try to run it from the terminal, I see:
Sha#1 kill

or words to that effect.

So I uninstalled Pburn 4.01, expecting to get Pburn 4.0 back (which still shows in the petget list as installed. But instead I'm kicked back to v. 3.5.2

Very frustrating.

Update: July5

Have tried reinstalling pburn 4.0.1 again, with same result - symlink is created in new temp directory (mnt/home/pburntmp) when the default is changed. After that, clicking on the pburn tab displays the 4.0.1 popup, but it's impossible to open the app.

Puppy Package Manager displays both 4.0.1 and 4.0.0 in its list of installed apps, but uninstalling 4.0.1 leaves only 3.5.2

No alternative download option is provided for the older versions of Puppy, so I'm stuck with 3.5.2.

When I blank DVD-RWs with 5.3.2, the job appears successful, but shows disk writes to be "complete" in a second, and there's nothing there.

When I check the disks with Tools/info, they appear blank without problems. However I note that of two Imation DVD-RW 4X disks tested this way just now, one is shown as a DVD-RW, the other as a DVD+/-RW

When I enter "burn" in a terminal, the 4.0.1 pop-up displays, while the terminal displays:

sh-4.1# pburn
Killed
sh-4.1#
otropogo@gmail.com facebook.com/otropogo

User avatar
zigbert
Posts: 6621
Joined: Wed 29 Mar 2006, 18:13
Location: Valåmoen, Norway
Contact:

#1983 Post by zigbert »

Version 4.0.2
See main post

Changelog
- Improve Saveboxes. (thanks to otropogo)
- Bugfix: get rid of testfile /root/test. (thanks to SFR)

User avatar
zigbert
Posts: 6621
Joined: Wed 29 Mar 2006, 18:13
Location: Valåmoen, Norway
Contact:

#1984 Post by zigbert »

otropogo
To force a fresh install, the easiest way is to delete $HOME/.pburn/

Sigmund

User avatar
otropogo
Posts: 764
Joined: Sat 24 Oct 2009, 15:17
Location: Montreal
Contact:

#1985 Post by otropogo »

zigbert wrote:otropogo
To force a fresh install, the easiest way is to delete $HOME/.pburn/

Sigmund
thanks for the tip. But how do I find $HOME/.pburn/ to delete it? I don't know the command line syntax, and can't find out how to do it from the Lucid Help app.
otropogo@gmail.com facebook.com/otropogo

sheldonisaac
Posts: 902
Joined: Mon 22 Jun 2009, 01:36
Location: Philadelphia, PA

4.02 doesn't run

#1986 Post by sheldonisaac »

zigbert wrote:Version 4.0.2
See main post

Changelog
- Improve Saveboxes. (thanks to otropogo)
- Bugfix: get rid of testfile /root/test. (thanks to SFR)
I just tried it on Dell Latitude D610, LucidPuppy 5.28-005

Help, please. Thank you.

Code: Select all

~> /usr/bin/pburn -v
Pburn 4.0.2
sh-4.1# pburn -D
  R E Q U I R E D                            
    bash                                      [OK]
    coreutils, awk, sed                       [OK]
    gtkdialog                        >= 0.8.3 [OK]
    cdrtools                                  [OK]
    dvd+rw-tools                              [OK]
    cddetect                                  [OK]

  O T H E R S                              
    ffmpeg      (audio/video)                 [OK]
    pFilesearch (filesearch)                  [OK]
    dvdauthor   (burning video-DVD)           [OK]
    vobcopy     (copy video-DVD)              [OK]
    vamps       (shrinking video-DVD)         [OK]
    vcdimager   (burning video-CD)            [OK]
    normalize   (volume-setting on Audio-CD)  [OK]
    nrg2iso     (burn Nero images)            [MISSING]
sh-4.1# 

~> /usr/bin/pburn   
gtkdialog: symbol lookup error: gtkdialog: undefined symbol: g_thread_create
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe

gcmartin

#1987 Post by gcmartin »

@Otropogo, this might help.
otropogo wrote: ... how do I find $HOME/.pburn/ to delete it? ... .
You can open a terminal and type this, for example:

Code: Select all

# echo $HOME
/root
#   
Thus, as an example, my path to delete is "/root/.pburn". Yours may be different.

Here to help

User avatar
otropogo
Posts: 764
Joined: Sat 24 Oct 2009, 15:17
Location: Montreal
Contact:

#1988 Post by otropogo »

gcmartin wrote:@Otropogo, this might help.
otropogo wrote: ... how do I find $HOME/.pburn/ to delete it? ... .
You can open a terminal and type this, for example:

Code: Select all

# echo $HOME
/root
#   
Thus, as an example, my path to delete is "/root/.pburn". Yours may be different.

Here to help
Thanks. But no cigar. The terminal entry gave me that same "/root" response as above. I then deleted .pburn, and then reinstalled pburn 4.02 with petget, but it won't run. I uninstalled it, and am back to 3.5.2. I still wonder what happened to v. 4.0.1, which I had installed and running before I tried the current one?
otropogo@gmail.com facebook.com/otropogo

User avatar
smokey01
Posts: 2813
Joined: Sat 30 Dec 2006, 23:15
Location: South Australia :-(
Contact:

#1989 Post by smokey01 »

Otropogo have you upgraded to gtkdialog-0.8.3?

User avatar
zigbert
Posts: 6621
Joined: Wed 29 Mar 2006, 18:13
Location: Valåmoen, Norway
Contact:

#1990 Post by zigbert »

sheldonisaac
Thank you, correct version of gtkdialog is critical, and pBurn 4.0.2 requires the latest (0.8.4 r514) to work properly (it should start up with gtkdialog-0.8.3). I have fixed the dependency check for pBurn-4.0.3.
BUT, much more important is the required cdrtools-3. This is not in Lucid by default, and the dependency check does not check version of cdrtools. - Now fixed.


Sigmund

User avatar
zigbert
Posts: 6621
Joined: Wed 29 Mar 2006, 18:13
Location: Valåmoen, Norway
Contact:

#1991 Post by zigbert »

Version 4.0.3
See main post

Changelog
- Bugfix: Correct dependency check for cdrtools and gtkdialog (thanks to sheldonisaac)

User avatar
zigbert
Posts: 6621
Joined: Wed 29 Mar 2006, 18:13
Location: Valåmoen, Norway
Contact:

#1992 Post by zigbert »

The latest gtkdialog for Precise/Slacko is attached here

User avatar
otropogo
Posts: 764
Joined: Sat 24 Oct 2009, 15:17
Location: Montreal
Contact:

#1993 Post by otropogo »

zigbert wrote:sheldonisaac
Thank you, correct version of gtkdialog is critical, and pBurn 4.0.2 requires the latest (0.8.4 r514) to work properly (it should start up with gtkdialog-0.8.3). I have fixed the dependency check for pBurn-4.0.3.
BUT, much more important is the required cdrtools-3. This is not in Lucid by default, and the dependency check does not check version of cdrtools. - Now fixed.


Sigmund
First, I tried simply installing pburn 4.0.3. Pet get installed it without warning of any missing dependencies. But it wouldn't run.

Second, I deleted the /.pburn/ directory and tried again, still no missing dependencies alert, still wouldn't run.

Third, I installed the gtkdialog for "precise" above. Don't know if this is right for Lucid, but pretty sure Slacko isn't, then tried installing pburn again. Again, no dependencies alert.

I then tried running opening and closing pburn several times, and it seemed to work fine, except that I had only 250MB to work with in the default tmp directory.

As soon as I changed the temp directory to a folder on my hard drive, no more pburn at all. Previously, the splash screen would appear, then nothing more (I could close it).

But now, not even the splash screen appears. If I type pburn in a terminal I get

sh-4.1# pburn
gtkdialog: symbol lookup error: gtkdialog: undefined symbol: g_thread_create
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
Killed


and if I don't close the terminal

Roxterm continues scrolling:

sh-4.1# sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe

So - still no cigar. BTW, I have no idea how to check which version of GTKdialog I have installed in Lupusplus, nor how to tell if I have CDRtools3, or how to install it.
otropogo@gmail.com facebook.com/otropogo

User avatar
zigbert
Posts: 6621
Joined: Wed 29 Mar 2006, 18:13
Location: Valåmoen, Norway
Contact:

#1994 Post by zigbert »

otropogo
I don't think the Gtkdialog for Precise would work for Lucid.
To check version:

Code: Select all

gtkdialog -v

Code: Select all

ffmpeg -version

User avatar
otropogo
Posts: 764
Joined: Sat 24 Oct 2009, 15:17
Location: Montreal
Contact:

#1995 Post by otropogo »

zigbert wrote:otropogo
I don't think the Gtkdialog for Precise would work for Lucid.
To check version:

Code: Select all

gtkdialog -v

Code: Select all

ffmpeg -version
After uninstalling the new gtkdialog for Precise, I got the pburn splash screen back, but nothing else. Running

Code: Select all

gtkdialog -v
after that showed:

sh-4.1# gtkdialog -v
gtkdialog version 0.7.21 (C) 2004, 2005, 2006, 2007 by Laszlo Pere
sh-4.1#
I then tried to uninstall pburn4.0.3-1. with the puppy package manager.

the package manager reported the uninstall successful, and the pet has been removed from the uninstall list.

However, when I clicked on the pburn tab in the multimedia menu, the 4.03 splash popup continued to appear, unresponsively.

This is the first time I've ever been unable to revert to a previous version of pburn after uninstalling the latest.

I then tried deleting /.pburn/, and then pburn 4.03 opened the configuration window, showing a warning that the tmp directory is dangerously small. Since all past attempts to reconfigure the tmp directory to a folder on my hard drive have resulted in a complete lockup of 4.03, I tried running with the default temp directory, to see if pburn could check the condition of a DVD-RW. So now it displays the tmp file warning and then locks up.

Since I have no entry for 4.03 in the package manager anymore, I don't know how to uninstall 4.03 to get back to a previously installed version.

I note also that, although v. 3.7 is still shown as an installed pburn, previous uninstalls of pburn 4.03 reverted to 3.5.2, not 3.7, or 4.0 (the last install that worked on my system)
otropogo@gmail.com facebook.com/otropogo

backi
Posts: 1922
Joined: Sun 27 Feb 2011, 22:00
Location: GERMANY

#1996 Post by backi »

Hi !
Is it possible to get newest Pburn running on Three Headed Dog or Lucid Puppy ?

How?

User avatar
zigbert
Posts: 6621
Joined: Wed 29 Mar 2006, 18:13
Location: Valåmoen, Norway
Contact:

#1997 Post by zigbert »

backi

To run pBurn 4 on Lucid, you need
- the latest gtkdialog
- cdrtools 3

User avatar
OscarTalks
Posts: 2196
Joined: Mon 06 Feb 2012, 00:58
Location: London, England

#1998 Post by OscarTalks »

Did an experiment.
Downloaded and compiled cdrtools-3.01a16 in Racy 5.5 (made a .pet).

Booted Lucid 528-005 pfix=ram
Installed cdrtools-3.01a16.pet
Installed gtkdialog-r514.pet

Installed pBurn-4.0.3.pet

Started pBurn from menu (and console) and looked at the dependency check. I didn't try to use it but no obvious errors or problems.

Strictly AT YOUR OWN RISK if you repeat this.

cdrtools-3.01a16 .PET
download = http://www.datafilehost.com/d/597aacc6
md5sum = 5cbabfad8d31d4ed4659b45d81ea07d2
Attachments
pburn-4.0.3-lucid.jpg
Pburn 4.0.3 running in Lucid 528-005
(63.42 KiB) Downloaded 664 times
gtkdialog-r514.pet
gtkdialog-r514 compiled in Racy 5.5
(89.85 KiB) Downloaded 233 times
Last edited by OscarTalks on Sat 03 Aug 2013, 20:53, edited 1 time in total.
Oscar in England
Image

sheldonisaac
Posts: 902
Joined: Mon 22 Jun 2009, 01:36
Location: Philadelphia, PA

#1999 Post by sheldonisaac »

OscarTalks wrote:Did an experiment.
Downloaded and compiled cdrtools-3.01a16 in Racy 5.5 (made a .pet).

Booted Lucid 528-005 pfix=ram
Installed cdrtools-3.01a16.pet
Installed gtkdialog-r514.pet

Installed pBurn-4.0.3.pet

Started pBurn from menu (and console) and looked at the dependency check. I didn't try to use it but no obvious errors or problems.
Thank you very much, OscarTalks.

Again I followed your steps, and got the same result as you did.

This computer has a CD-RW/DVD-ROM drive, so maybe I'll try Pburn to make a data or audio CD; have not yet done any burning on this computer.

Lucid Puppy 5.2.8-005

LATER: Did those steps with the savefile loaded, and again duplicated your results. Tried burning data to a 4X CD-R. Seemed to "freeze" at the end, without any clear message. Eventually was able to eject the disc.
Tried another disc, this time set speed to 4X.
Again ended without any message that told me (sorry, inexperienced) it was finished.
Was able to mount the disc and see the data.
Will do more tests later.
Last edited by sheldonisaac on Fri 19 Jul 2013, 22:35, edited 1 time in total.

User avatar
zigbert
Posts: 6621
Joined: Wed 29 Mar 2006, 18:13
Location: Valåmoen, Norway
Contact:

#2000 Post by zigbert »

Would be great if someone verify OscarTalks packs for Lucid/Racy. I could make a link in the main post.


Sigmund

Post Reply