Precise 5.6.9 (5.7beta1)
WiFi not working, Sound not working !
I have a friend that has just got a Toshiba l/top c855d-s5320,
he finds that it has MS-WIN8 on board and finds that he can't
get his older software to run. Store suggested that he purchased
all new again ! He was not so happy to do that as his old machine
with XP is a bit slow now.
I now have a l/top with 4gb of ram, 500gb hd and a 64bit processor.
I blew all win8 away and loaded a full inst of v5.2.8.005-2 as this
has an office suite of progs and lot of other goodies.
The problem now is that I can't get the WiFi or Sound to work in
in this l/top ! Also note there is a problem with the mouse control
of touchpad and the screen starts up with a distorted image some what
broken up. The machine can couple to the web via direct cable
connection.
I have also put a full instal of Precisepup v5.6.9 beta1on another
part of h/drive, but the wifi still not working and sound still not
working, but the mouse control is great and the poor image start up problem
is gone!!
So how do I get these problems solved? What can I take from 569
and place in v528 to solve the image problem? Also need to
get the sound working. Other things are not working in v569,
screen capture etc.
Any help please !
Tui
he finds that it has MS-WIN8 on board and finds that he can't
get his older software to run. Store suggested that he purchased
all new again ! He was not so happy to do that as his old machine
with XP is a bit slow now.
I now have a l/top with 4gb of ram, 500gb hd and a 64bit processor.
I blew all win8 away and loaded a full inst of v5.2.8.005-2 as this
has an office suite of progs and lot of other goodies.
The problem now is that I can't get the WiFi or Sound to work in
in this l/top ! Also note there is a problem with the mouse control
of touchpad and the screen starts up with a distorted image some what
broken up. The machine can couple to the web via direct cable
connection.
I have also put a full instal of Precisepup v5.6.9 beta1on another
part of h/drive, but the wifi still not working and sound still not
working, but the mouse control is great and the poor image start up problem
is gone!!
So how do I get these problems solved? What can I take from 569
and place in v528 to solve the image problem? Also need to
get the sound working. Other things are not working in v569,
screen capture etc.
Any help please !
Tui
Precise Puppy version 5.6.9, released Jul 2013
Looks and feels very good - even on my 10yr old Acer laptop.
Manual frugal to an ext3 partition, booting with grub4dos.
All seems to work as expected OTB - no obvious defects.
# uname -a
Linux puppypc2842 3.2.48 #1 SMP Thu Jul 11 12:20:55 GMT-8 2013 i686 i686 i386 GNU/Linux
# free
total used free shared buffers
Mem: 366904 297356 69548 0 41388
-/+ buffers: 255968 110936
Swap: 658660 368 658292
# top
Mem: 298512K used, 68392K free, 0K shrd, 41644K buff, 207396K cached
CPU: 4% usr 4% sys 0% nic 90% idle 0% io 0% irq 0% sirq
Load average: 0.37 0.43 0.36 1/63 26313
Very impressive performance - especially considering the age of this old tonker toy.
(Actually the old beast has done well and outlived a 2yr old laptop (broken screen) and a not so new LCD display (went pop this morning).
Will twiddle some more and then post a Hinfo report.
edit: This is astonishingly good - both SeaMonkey and QtWeb work well on all the web sites I normally frequent (nothing particularly demanding), did also try a few that I would not normally visit and all seemed good.
Opera also works well - so something for almost all preferences.
This is an extremely flexable Puppy - tried thunar file manager - all seemed good and dillo worked fine too.
Overall imho a strikingly good and incredibly usable Puppy. Thanks BK.
Looks and feels very good - even on my 10yr old Acer laptop.
Manual frugal to an ext3 partition, booting with grub4dos.
All seems to work as expected OTB - no obvious defects.
# uname -a
Linux puppypc2842 3.2.48 #1 SMP Thu Jul 11 12:20:55 GMT-8 2013 i686 i686 i386 GNU/Linux
# free
total used free shared buffers
Mem: 366904 297356 69548 0 41388
-/+ buffers: 255968 110936
Swap: 658660 368 658292
# top
Mem: 298512K used, 68392K free, 0K shrd, 41644K buff, 207396K cached
CPU: 4% usr 4% sys 0% nic 90% idle 0% io 0% irq 0% sirq
Load average: 0.37 0.43 0.36 1/63 26313
Very impressive performance - especially considering the age of this old tonker toy.
(Actually the old beast has done well and outlived a 2yr old laptop (broken screen) and a not so new LCD display (went pop this morning).
Will twiddle some more and then post a Hinfo report.
edit: This is astonishingly good - both SeaMonkey and QtWeb work well on all the web sites I normally frequent (nothing particularly demanding), did also try a few that I would not normally visit and all seemed good.
Opera also works well - so something for almost all preferences.
This is an extremely flexable Puppy - tried thunar file manager - all seemed good and dillo worked fine too.
Overall imho a strikingly good and incredibly usable Puppy. Thanks BK.
- Attachments
-
- Hinfo.tar.gz
- (8.95 KiB) Downloaded 324 times
[b]Asus[/b] 701SD. 2gig ram. 8gb SSD. [b]IBM A21m[/b] laptop. 192mb ram. PIII Coppermine proc. [b]X60[/b] T2400 1.8Ghz proc. 2gig ram. 80gb hdd. [b]T41[/b] Pentium M 1400Mhz. 512mb ram.
- dennis-slacko531
- Posts: 100
- Joined: Wed 18 Jan 2012, 21:53
- Location: Oregon
- Contact:
Another happy customer, thanks Barry...
# uname -a Linux puppypc16972 3.2.48 #1 SMP Thu Jul 11 12:20:55 GMT-8 2013 i686 i686 i386 GNU/Linux
# uptime 14:24:22 up 1 day, 20:31, load average: 0.09, 0.17, 0.21
# report-video
VIDEO REPORT: Precise Puppy, version 5.6.9
Chip description:
VGA compatible controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02)
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1280x1024
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): intel
Loaded modules: dbe dri dri2 extmod fb glx kbd mouse record
Actual rendering on monitor:
Resolution: 1280x1024 pixels (338x270 millimeters)
Depth: 24 planes
It's mirrored on my GoDaddy server!
LINUX without EYES http://www.LNUX.com
# uptime 14:24:22 up 1 day, 20:31, load average: 0.09, 0.17, 0.21
# report-video
VIDEO REPORT: Precise Puppy, version 5.6.9
Chip description:
VGA compatible controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02)
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1280x1024
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): intel
Loaded modules: dbe dri dri2 extmod fb glx kbd mouse record
Actual rendering on monitor:
Resolution: 1280x1024 pixels (338x270 millimeters)
Depth: 24 planes
It's mirrored on my GoDaddy server!
LINUX without EYES http://www.LNUX.com
Re: WiFi not working, Sound not working !
I suggest you try several different Puppies and see if you can find one that works! If you want LibreOffice OOTB then try PHATSlacko. There are others out there as well.Tui wrote:So how do I get these problems solved?
Good Luck, J
BTW - Your question would have been more appropriate in the Hardware or Users section.
Running from live CD with save file on hard drive partition sdb5.
I think this is an issue with Pmount. I see this in Slacko 5.5 too.
When running any program that has a save option.
When you select save.
The save window opens.
The only partitions visible to save in are the ones that are mounted.
That makes sense.
Here is the issue:
The partition (sdb5) that has the Precise save file on it gets semi- mounted when you first bootup.
Because of the way this partition is mounted it does not show up in the save option window of a program.
Partition sdb5 is not available to save to.
See picture.
Clicking on the sdb5 desktop icon makes no change to how it is mounted.
.
I think this is an issue with Pmount. I see this in Slacko 5.5 too.
When running any program that has a save option.
When you select save.
The save window opens.
The only partitions visible to save in are the ones that are mounted.
That makes sense.
Here is the issue:
The partition (sdb5) that has the Precise save file on it gets semi- mounted when you first bootup.
Because of the way this partition is mounted it does not show up in the save option window of a program.
Partition sdb5 is not available to save to.
See picture.
Clicking on the sdb5 desktop icon makes no change to how it is mounted.
.
- Attachments
-
- pmount.png
- (76.62 KiB) Downloaded 1251 times
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
Missing /etc/shells file
The /etc/shells file is read by various applications and utilities to determine if a file is a valid user shell. If this file is missing, the only shell names returned by the getusershell() library function will be "/bin/sh" and "/bin/csh".
One result of this file being missing, as discovered by Robotop, is that any user who has "/bin/bash" defined in /etc/passwd as her login shell will be denied access by pure-ftpd. (By default, busybox adduser sets the user's login shell to /bin/bash, so this is not unusual.)
Although I don't have Precise 5.6.9, I suspect that it may be missing this file since the file is not in Precise 5.5 or 5.6 (or any of four other Puppies I looked at), and I don't see it in Woof.
For more detail, see the thread started by Robotop: adduser and pure-ftpd
One result of this file being missing, as discovered by Robotop, is that any user who has "/bin/bash" defined in /etc/passwd as her login shell will be denied access by pure-ftpd. (By default, busybox adduser sets the user's login shell to /bin/bash, so this is not unusual.)
Although I don't have Precise 5.6.9, I suspect that it may be missing this file since the file is not in Precise 5.5 or 5.6 (or any of four other Puppies I looked at), and I don't see it in Woof.
For more detail, see the thread started by Robotop: adduser and pure-ftpd
Manual frugal install to a 16gb SDHC card, running on an Acer desktop
pc.
video-info-glx 1.5.3 Fri 26 Jul 2013 on Precise Puppy 5.6.11 Linux 3.2.48 i686
0.0 VGA compatible controller:NVIDIA Corporation C77[GeForce 8200](rev a2)
0.0 VGA compatible controller:NVIDIA Corporation G98[GeForce 9300 GE](rev a1)
oem: NVIDIA
product: G98 Board - 5610003u Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.11.3
dimensions: 1440x900 pixels (373x231 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce 9300 GE/PCIe/SSE2/3DNOW!
OpenGL version string: 3.3.0 NVIDIA 319.32
sh-4.1# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
302 frames in 5.0 seconds = 60.268 FPS
300 frames in 5.0 seconds = 59.889 FPS
300 frames in 5.0 seconds = 59.887 FPS
sh-4.1#
Athlon(tm) Dual Core Processor 4850e
Core 0: @2500 1: @2500 MHz
Ralink corp. RT2790 Wireless 802.11n 1T/2R PCIe
It's working well.
EDIT:I backed up my savefile,shutdown,and put my SDHC card into an usb
card reader, then plugged it into an hp desktop pc.
video-info-glx 1.5.3 Fri 26 Jul 2013 on Precise Puppy 5.6.11 Linux 3.2.48 i686
0.0 VGA compatible controller:NVIDIA Corporation GF108[GeForce GT 430](reva1)
oem: NVIDIA
product: GF108 Board - 1071v0p1 Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.11.3
dimensions: 1920x1080 pixels (513x292 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce GT 430/PCIe/SSE2/3DNOW!
OpenGL version string: 4.3.0 NVIDIA 319.32
AMD Phenom(tm) II X6 1045T Processor
Core 0: @2700 1: @2700 2: @2700 3: @2700 4: @2700 5: @2700 MHz
I had to run the alsa wizard to get sound working but everything else
worked fine.
pc.
video-info-glx 1.5.3 Fri 26 Jul 2013 on Precise Puppy 5.6.11 Linux 3.2.48 i686
0.0 VGA compatible controller:NVIDIA Corporation C77[GeForce 8200](rev a2)
0.0 VGA compatible controller:NVIDIA Corporation G98[GeForce 9300 GE](rev a1)
oem: NVIDIA
product: G98 Board - 5610003u Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.11.3
dimensions: 1440x900 pixels (373x231 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce 9300 GE/PCIe/SSE2/3DNOW!
OpenGL version string: 3.3.0 NVIDIA 319.32
sh-4.1# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
302 frames in 5.0 seconds = 60.268 FPS
300 frames in 5.0 seconds = 59.889 FPS
300 frames in 5.0 seconds = 59.887 FPS
sh-4.1#
Athlon(tm) Dual Core Processor 4850e
Core 0: @2500 1: @2500 MHz
Ralink corp. RT2790 Wireless 802.11n 1T/2R PCIe
It's working well.
EDIT:I backed up my savefile,shutdown,and put my SDHC card into an usb
card reader, then plugged it into an hp desktop pc.
video-info-glx 1.5.3 Fri 26 Jul 2013 on Precise Puppy 5.6.11 Linux 3.2.48 i686
0.0 VGA compatible controller:NVIDIA Corporation GF108[GeForce GT 430](reva1)
oem: NVIDIA
product: GF108 Board - 1071v0p1 Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.11.3
dimensions: 1920x1080 pixels (513x292 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce GT 430/PCIe/SSE2/3DNOW!
OpenGL version string: 4.3.0 NVIDIA 319.32
AMD Phenom(tm) II X6 1045T Processor
Core 0: @2700 1: @2700 2: @2700 3: @2700 4: @2700 5: @2700 MHz
I had to run the alsa wizard to get sound working but everything else
worked fine.
- Attachments
-
- screenshot.jpg
- (62.89 KiB) Downloaded 1263 times
Last edited by Billtoo on Fri 26 Jul 2013, 13:50, edited 1 time in total.
- ASRI éducation
- Posts: 3197
- Joined: Sat 09 May 2009, 12:10
- Location: France
- Contact:
My message is perhaps a little off topic.
Currently, I am preparing a script which allows a very simplified installation of Puppy (it's based on an excellent script of rcrsn51).
At the end of installation, to avoid creating a pupsave file, I add the file /etc/personnal_data_save_disabled (cf. script = 'shutdownconfig' modified 120823 by rerwin => flag to disable saving personalized data).
Unfortunately, this method is not working when I use a USB bootable key (liveUSB).
My questions / requests:
- When I use a bootable USB drive, is it possible to avoid the creation of the pupsave file (using a method other than that described above)?
- Is it possible to edit the file 'shutdownconfig', so that the change of Rerwin also provides USB media?
Cordialement,
Currently, I am preparing a script which allows a very simplified installation of Puppy (it's based on an excellent script of rcrsn51).
At the end of installation, to avoid creating a pupsave file, I add the file /etc/personnal_data_save_disabled (cf. script = 'shutdownconfig' modified 120823 by rerwin => flag to disable saving personalized data).
Unfortunately, this method is not working when I use a USB bootable key (liveUSB).
My questions / requests:
- When I use a bootable USB drive, is it possible to avoid the creation of the pupsave file (using a method other than that described above)?
- Is it possible to edit the file 'shutdownconfig', so that the change of Rerwin also provides USB media?
Cordialement,
Projet ASRI éducation => [url=http://asri-education.org/]Association[/url] | [url=http://forum.asri-education.org/]Forum[/url] | [url=http://dl01.asri-education.org/]Dépôt[/url] | [url=http://kids.asri-education.org/]Espace kids[/url]
Hi ASRI éducation,
Forum member shadower_sc has some great tips for you:
http://murga-linux.com/puppy/viewtopic. ... 846#697846
Forum member shadower_sc has some great tips for you:
http://murga-linux.com/puppy/viewtopic. ... 846#697846
- ASRI éducation
- Posts: 3197
- Joined: Sat 09 May 2009, 12:10
- Location: France
- Contact:
Thank you anikin.anikin wrote:Hi ASRI éducation,
Forum member shadower_sc has some great tips for you:
http://murga-linux.com/puppy/viewtopic. ... 846#697846
Projet ASRI éducation => [url=http://asri-education.org/]Association[/url] | [url=http://forum.asri-education.org/]Forum[/url] | [url=http://dl01.asri-education.org/]Dépôt[/url] | [url=http://kids.asri-education.org/]Espace kids[/url]
Continued from previous message:
I moved my usb card reader + SDHC card to a Gateway desktop pc.
video-info-glx 1.5.3 Fri 26 Jul 2013 on Precise Puppy 5.6.11 Linux 3.2.48 i686
0.0 VGA compatible controller:NVIDIACorporationGF114[GeForceGTX560Ti](rev a1)
oem: NVIDIA
product: GF110 Board - 12630002 Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.11.3
dimensions: 1920x1080 pixels (513x292 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce GTX 560 Ti/PCIe/SSE2
OpenGL version string: 4.3.0 NVIDIA 319.32
Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
Core 0: @1600 1: @1600 2: @1600 3: @1600 4: @1600 5: @1600 6: @1600
7: @1600 MHz
Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe
I had to run the alsa wizard to set up sound but everything else works fine.
This Precise 5.6.11 beta2 is working well on my hardware, older and newer.
Thankyou Barry.
I moved my usb card reader + SDHC card to a Gateway desktop pc.
video-info-glx 1.5.3 Fri 26 Jul 2013 on Precise Puppy 5.6.11 Linux 3.2.48 i686
0.0 VGA compatible controller:NVIDIACorporationGF114[GeForceGTX560Ti](rev a1)
oem: NVIDIA
product: GF110 Board - 12630002 Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.11.3
dimensions: 1920x1080 pixels (513x292 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce GTX 560 Ti/PCIe/SSE2
OpenGL version string: 4.3.0 NVIDIA 319.32
Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
Core 0: @1600 1: @1600 2: @1600 3: @1600 4: @1600 5: @1600 6: @1600
7: @1600 MHz
Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe
I had to run the alsa wizard to set up sound but everything else works fine.
This Precise 5.6.11 beta2 is working well on my hardware, older and newer.
Thankyou Barry.
- Attachments
-
- screenshot2.jpg
- (35.63 KiB) Downloaded 664 times
Fresh manual frugal install on the old Athlon XP box.....looking good.
# report-video
VIDEO REPORT: Precise Puppy, version 5.6.11
Chip description:
VGA compatible controller: NVIDIA Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev c1)
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1440x900
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): nouveau
Loaded modules: dbe dri dri2 exa extmod fb glx kbd mouse record shadowfb
Actual rendering on monitor:
Resolution: 1440x900 pixels (380x238 millimeters)
Depth: 24 planes
...the above also recorded in /tmp/report-video
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
1898 frames in 5.0 seconds = 379.546 FPS
2025 frames in 5.0 seconds = 404.963 FPS
2089 frames in 5.0 seconds = 417.754 FPS
1929 frames in 5.0 seconds = 385.702 FPS
1975 frames in 5.0 seconds = 394.669 FPS
2039 frames in 5.0 seconds = 407.672 FPS
1615 frames in 5.0 seconds = 322.785 FPS
-Computer-
Processor : AMD Athlon(tm) XP 2400+
Memory : 1034MB (298MB used)
Machine Type : Physical machine
Operating System : Precise Puppy - 5.6.11
User Name : root (root)
Date/Time : Sat 27 Jul 2013 12:42:39 AM CDT
-Display-
Resolution : 1440x900 pixels
OpenGL Renderer : Mesa DRI nv18 x86/MMX+/3DNow!+/SSE
X11 Vendor : The X.Org Foundation
-Audio Devices-
Audio Adapter : VIA8233 - VIA 8235
# report-video
VIDEO REPORT: Precise Puppy, version 5.6.11
Chip description:
VGA compatible controller: NVIDIA Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev c1)
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1440x900
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): nouveau
Loaded modules: dbe dri dri2 exa extmod fb glx kbd mouse record shadowfb
Actual rendering on monitor:
Resolution: 1440x900 pixels (380x238 millimeters)
Depth: 24 planes
...the above also recorded in /tmp/report-video
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
1898 frames in 5.0 seconds = 379.546 FPS
2025 frames in 5.0 seconds = 404.963 FPS
2089 frames in 5.0 seconds = 417.754 FPS
1929 frames in 5.0 seconds = 385.702 FPS
1975 frames in 5.0 seconds = 394.669 FPS
2039 frames in 5.0 seconds = 407.672 FPS
1615 frames in 5.0 seconds = 322.785 FPS
-Computer-
Processor : AMD Athlon(tm) XP 2400+
Memory : 1034MB (298MB used)
Machine Type : Physical machine
Operating System : Precise Puppy - 5.6.11
User Name : root (root)
Date/Time : Sat 27 Jul 2013 12:42:39 AM CDT
-Display-
Resolution : 1440x900 pixels
OpenGL Renderer : Mesa DRI nv18 x86/MMX+/3DNow!+/SSE
X11 Vendor : The X.Org Foundation
-Audio Devices-
Audio Adapter : VIA8233 - VIA 8235
Another fresh manual frugal install ....this on the old P3 test box.Needed to use SNS for internet connection but otherwise all good. Naturally operating a bit slower than the other install but certainly usable.
# report-video
VIDEO REPORT: Precise Puppy, version 5.6.11
Chip description:
Host bridge: Intel Corporation 82810E DC-133 (GMCH) Graphics Memory Controller Hub (rev 03)
VGA compatible controller: Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller (rev 03)
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1024x768
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): intel
Loaded modules: dbe ddc dri dri2 extmod fb glx int10 kbd mouse ramdac record vbe vgahw xaa
Actual rendering on monitor:
Resolution: 1024x768 pixels (321x241 millimeters)
Depth: 24 planes
...the above also recorded in /tmp/report-video
# glxgears
32 frames in 5.0 seconds = 6.378 FPS
35 frames in 5.1 seconds = 6.843 FPS
38 frames in 5.0 seconds = 7.568 FPS
40 frames in 5.1 seconds = 7.902 FPS
31 frames in 5.1 seconds = 6.042 FPS
-Computer-
Processor : Pentium III (Coppermine)
Memory : 253MB (139MB used)
Machine Type : Physical machine
Operating System : Precise Puppy - 5.6.11
User Name : root (root)
Date/Time : Sat 27 Jul 2013 12:49:20 AM CDT
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Gallium 0.4 on softpipe
X11 Vendor : The X.Org Foundation
-Audio Devices-
Audio Adapter : ICH - Intel 82801AA-ICH
# report-video
VIDEO REPORT: Precise Puppy, version 5.6.11
Chip description:
Host bridge: Intel Corporation 82810E DC-133 (GMCH) Graphics Memory Controller Hub (rev 03)
VGA compatible controller: Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller (rev 03)
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1024x768
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): intel
Loaded modules: dbe ddc dri dri2 extmod fb glx int10 kbd mouse ramdac record vbe vgahw xaa
Actual rendering on monitor:
Resolution: 1024x768 pixels (321x241 millimeters)
Depth: 24 planes
...the above also recorded in /tmp/report-video
# glxgears
32 frames in 5.0 seconds = 6.378 FPS
35 frames in 5.1 seconds = 6.843 FPS
38 frames in 5.0 seconds = 7.568 FPS
40 frames in 5.1 seconds = 7.902 FPS
31 frames in 5.1 seconds = 6.042 FPS
-Computer-
Processor : Pentium III (Coppermine)
Memory : 253MB (139MB used)
Machine Type : Physical machine
Operating System : Precise Puppy - 5.6.11
User Name : root (root)
Date/Time : Sat 27 Jul 2013 12:49:20 AM CDT
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Gallium 0.4 on softpipe
X11 Vendor : The X.Org Foundation
-Audio Devices-
Audio Adapter : ICH - Intel 82801AA-ICH
Code: Select all
# free
total used free shared buffers
Mem: 253432 241316 12116 0 19932
-/+ buffers: 221384 32048
Swap: 1020092 1468 1018624
#
simargl,
you remind me of a person who comes over to his friend, has a nice dinner and says: your mother doesn't wear a nice dress, she doesn't have botox and breast transplant - she's ugly. By your own admission, you have only used puppy once or twice. You also said, that you don't understand puppy. It was mavrothal, who built the save feature among other things for you. So why puppy should bother you at all? Not being a puppy user, not having a successful project of your own with satisfied followers and users, being a newcomer and an outsider - what you're saying has absolutely no weight. And there's nothing new in your words, that this forum already doesn't know. If I were you, I'd be more concerned about doing some damage control. Instead of contaminating the forum, I'd lie low and think hard about getting back your good standing and reputation and user's trust.
you remind me of a person who comes over to his friend, has a nice dinner and says: your mother doesn't wear a nice dress, she doesn't have botox and breast transplant - she's ugly. By your own admission, you have only used puppy once or twice. You also said, that you don't understand puppy. It was mavrothal, who built the save feature among other things for you. So why puppy should bother you at all? Not being a puppy user, not having a successful project of your own with satisfied followers and users, being a newcomer and an outsider - what you're saying has absolutely no weight. And there's nothing new in your words, that this forum already doesn't know. If I were you, I'd be more concerned about doing some damage control. Instead of contaminating the forum, I'd lie low and think hard about getting back your good standing and reputation and user's trust.
- ASRI éducation
- Posts: 3197
- Joined: Sat 09 May 2009, 12:10
- Location: France
- Contact:
That's right, the visual could be greatly improved.simargl wrote:Puppy Linux has huge benefit compared to others with being fully portable but it needs better look (XFCE), better package manager (Synaptic) to become competitive with Slax, Porteus, Slitaz.
Regarding the package manager, a utility such as "synaptic", friendly and light, but also suitable for comptibles packets with Puppy, it would be a big step (but it should not be easy to create).
Cordialement,
- broomdodger
- Posts: 279
- Joined: Sat 10 May 2008, 02:38
- Location: Santa Cruz, CA
@simarglsimargl wrote:Latest version sizes:
devx_precise_5.6.11.sfs 182.3M
precise-5.6.11.iso 200.4M
Total download 382.7M
Original Ubuntu iso fits to a single CD, with using Puppy based on Ubuntu you get:
- reduced download for 320MB
- uglified desktop
- extremely slow Package manager, sometimes it simply doesn't work
- you can't use icon themes from gnome-look.org
- 500 of useless additions in JWM menu
- look that is not consistent, different sized icons
For people that use computer with 512MB of RAM or more, and want Ubuntu based system, much better option is Lubuntu, leaving Puppy for those that can't use anything else. It doesn't have to be like that, but unfortunately it is, at least for now. Barry's decision to abandon T2 build, and promised PET package improvements is really bad choice, not to mention including two browsers in something that used to be small Linux distro.
I applaud you previous contributions to Puppy Linux and hope you will consider this an opportunity to submit a consistent icon set, or some other improvement.
This is 5.7beta2 and Barry usually changes the desktop and icons for the final.
When comparing download size to Ubuntu, do not forget that to compile ANYTHING on Ubuntu you need to download build-essential, sqlite3, and several other packages. If you do not compile your own apps, the devx is NOT needed. So subtract *182.3M* from your total.
We are really comparing Puppy at 200MB and Ubuntu at 800MB.
Ubuntu is PAE only, so it will not run on many laptops that are otherwise quite fast, and have plenty RAM and drive space.
Also Puppy can be installed and running in less than 10 minutes (if you are slow) whereas *IF* Ubuntu or Lubuntu will install, it has failed on many boxes, it will take 30-60 minutes.
Comparing one great person vs a committee of ???.
Agreed... I do not particularly like JWN and would prefer LXDE or XFCE or ???.
I find Ubuntu's Unity desktop to be annoying at best.
I have been using Lubuntu (LXDE) and like it for servers I build. That is... until I learn how to do the same with Puppy Linux.
I am pleased to test (5.7beta2) Opera and Seamonkey side-by-side, without needing to manually install it.
On MacOS I have been using Opera Next and hope to see it for Puppy someday. QtWeb in 5.7beta1 was also amazing, real potential, but now that Opera is being built on webkit... that is the one to watch for.
Bill