Cielo Puppy Wary 5

Please post any bugs you have found
Post Reply
Message
Author
User avatar
greengeek
Posts: 5789
Joined: Tue 20 Jul 2010, 09:34
Location: Republic of Novo Zelande

Cielo Puppy Wary 5

#1 Post by greengeek »

Using puppy Cielo based on Wary 5 it would connect to the internet once, but after the second boot it would not connect any more.

It seems that the first dhcp request from Cielo worked successfully but then caused the router to go into a state where it would refuse to issue any other new dhcp leases. This affected the second and subsequent boots of the Cielo puppy pc but also prevented any other PC (including a Windows XP netbook) from being able to request a dhcp connection.

This could only be resolved by turning the router off/on and waiting for the ADSL to re-establish. Then rebooting the Cielo PC. Very annoying and time consuming.

Barry K refers to dhcpcd problems having crept back into Wary in this blog comment:

http://bkhome.org/blog/?viewDetailed=02352

He mentions the dhcpcd pet and this did resolve the problem for me on Cielo Wary 5 in an installed environment (but the problem will still remain in a live cd obviously).

Note that the pet file name is misspelt though. The actual pet is available here:

http://distro.ibiblio.org/quirky/pet_pa ... 2-1-w5.pet

I think some routers are very susceptible to the faulty dhcpcd code and I suspect this is responsible for internet connection failures with many other previous puppy versions, particularly in a Live CD environment where you cannot change the dhcpcd code that is written on the CD.

User avatar
Colonel Panic
Posts: 2171
Joined: Sat 16 Sep 2006, 11:09

#2 Post by Colonel Panic »

Interesting. I'm giving Cielo a spin now and I'll let you know if this happens when I log out and reboot into a different (or the same) distro.

Certainly a cool project though. It looks good and comes with a big selection of apps including Open Office, Opera and Seamonkey.
Gigabyte M68MT-52P motherboard, AMD Athlon II X4 630, 5.8 GB of DDR3 RAM and a 250 GB Hitachi hard drive running Ubuntu 16.04.6, MX-19.2, Peppermint 10, PCLinuxOS 20.02, LXLE 18.04.3, Pardus 19.2, exGENT 200119, Bionic Pup 8.0 and Xenial CE 7.5 XL.

User avatar
Colonel Panic
Posts: 2171
Joined: Sat 16 Sep 2006, 11:09

#3 Post by Colonel Panic »

Looks OK to me so far, no problems with Internet connection at all either when booting up in a different distro after using Cielo or when returning to it.
Gigabyte M68MT-52P motherboard, AMD Athlon II X4 630, 5.8 GB of DDR3 RAM and a 250 GB Hitachi hard drive running Ubuntu 16.04.6, MX-19.2, Peppermint 10, PCLinuxOS 20.02, LXLE 18.04.3, Pardus 19.2, exGENT 200119, Bionic Pup 8.0 and Xenial CE 7.5 XL.

User avatar
Colonel Panic
Posts: 2171
Joined: Sat 16 Sep 2006, 11:09

#4 Post by Colonel Panic »

Back in Cielo again and on my old machine after a disastrous install of Mageia 3 RC (don't ask) left my Optiplex with severe problems. I'm going to have to DBAN the hard drive soon, start again and reinstall.everything (at least I make regular backups now, so all was not lost).

In the meantime though, Cielo's working fine :).
Gigabyte M68MT-52P motherboard, AMD Athlon II X4 630, 5.8 GB of DDR3 RAM and a 250 GB Hitachi hard drive running Ubuntu 16.04.6, MX-19.2, Peppermint 10, PCLinuxOS 20.02, LXLE 18.04.3, Pardus 19.2, exGENT 200119, Bionic Pup 8.0 and Xenial CE 7.5 XL.

User avatar
greengeek
Posts: 5789
Joined: Tue 20 Jul 2010, 09:34
Location: Republic of Novo Zelande

#5 Post by greengeek »

I had a request to upload Cielo wary 5 as the original link has problems so here it is:
http://www.mediafire.com/download/m9oqq ... wary_5.iso
md5: bd983c487b75317dca6f4c2a1c2347b6

sansriraj
Posts: 24
Joined: Tue 30 Jun 2009, 07:05

Re: puppy Cielo based on Wary 5

#6 Post by sansriraj »

greengeek wrote:I had a request to upload Cielo wary 5 as the original link has problems so here it is:
http://www.mediafire.com/download/m9oqq ... wary_5.iso
md5: bd983c487b75317dca6f4c2a1c2347b6
Dear greengeek

Many thanks for uploading the ISO of Puppy Cielo wary 5 which I have successfully downloaded, frugal installed and booted the system with. This thanks giving note is being posted through Opera in that puplet . Thank yu once again for uploading the puplet as requested.

Through this post I further express my sincere gratitude to all the contributing members like greengeek of the Forum, who has been spending their valuable time and efforts to help the novices like me in the time of need.. It is through their help that I am able to productively use my 13 year old Pentium III 666 Mhz. computer. It is only because of Puppy Linux that I am reluctant to upgrade/replace my computer as it is very much fulfiling my requirement as a home user. I have migrated from Windows to Puppy Linux 4.5 years ago having being frustrated by constantly locating, installing and updating anti virus softwares.

Kindly accept my thanks once again. :lol:

User avatar
Colonel Panic
Posts: 2171
Joined: Sat 16 Sep 2006, 11:09

#7 Post by Colonel Panic »

greengeek wrote:I had a request to upload Cielo wary 5 as the original link has problems so here it is:
http://www.mediafire.com/download/m9oqq ... wary_5.iso
md5: bd983c487b75317dca6f4c2a1c2347b6
Thanks for this. My original CD-R of Cielo stopped booting for some reason so I had to download and burn a fresh copy before I could use it again.

It's a very good choice for old computers IMO; full-featured with Open Office and two browsers (Firefox and Opera), and yet it still fits on a single CD.
Gigabyte M68MT-52P motherboard, AMD Athlon II X4 630, 5.8 GB of DDR3 RAM and a 250 GB Hitachi hard drive running Ubuntu 16.04.6, MX-19.2, Peppermint 10, PCLinuxOS 20.02, LXLE 18.04.3, Pardus 19.2, exGENT 200119, Bionic Pup 8.0 and Xenial CE 7.5 XL.

User avatar
Colonel Panic
Posts: 2171
Joined: Sat 16 Sep 2006, 11:09

#8 Post by Colonel Panic »

I'm using Wary 5.5 now with some of the additional software that Cielo has, added on top, and I think Wary would be a good choice for a community version of Puppy (especially for those of us with older computers).

It seems to put a lot less stress on my computer (due to its older libraries making less demand on my hardware) than other recent Puppies do.

Puppy Precise Retro also runs well on my machine but more noisily than Wary does, indicating that it needs more resources to run properly than Wary.
Gigabyte M68MT-52P motherboard, AMD Athlon II X4 630, 5.8 GB of DDR3 RAM and a 250 GB Hitachi hard drive running Ubuntu 16.04.6, MX-19.2, Peppermint 10, PCLinuxOS 20.02, LXLE 18.04.3, Pardus 19.2, exGENT 200119, Bionic Pup 8.0 and Xenial CE 7.5 XL.

Post Reply