Drivers for Puppy 5.1-5.2.8 with 2.6.33.2 kernel

For drivers and kernel modules.
Message
Author
mama21mama

#161 Post by mama21mama »

tempestuous wrote:Realtek N-mode wifi devices.
work lucid 5.25 r8192ce_pci-k2.6.33.2.pet

kernel 3 no work - as I do to compile the kernel 3?

User avatar
Spaccafumo
Posts: 33
Joined: Thu 15 Jan 2009, 11:06
Location: Sulmona - Italy

Drivers for Slacko. Kernel 2.6.37.6

#162 Post by Spaccafumo »

Any rt3070sta-2.6.37.6.pet?
-------------------
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=148f ProdID=3070 Rev= 1.01
S: Manufacturer=Ralink
S: Product=802.11 n WLAN
S: SerialNumber=1.0
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=450mA
I:* If#= 0 Alt= 0 #EPs= 7 Cls=ff(vend.) Sub=ff Prot=ff Driver=rt2870
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Saluti.
Qui si usa Linux
http://www.puppylinux.org
Sulmona - Italy

Pelo

Please redo an ISO for Lucid 528

#163 Post by Pelo »

people are still realising disabled LUCIDs
LXDE lucid nite flux from spane : no sound, no wifi.
Even now ! we have all the correct drivers available. Please issue a new ISO including them.
And long life to Lucid !

User avatar
tallboy
Posts: 1760
Joined: Tue 21 Sep 2010, 21:56
Location: Drøbak, Norway

#164 Post by tallboy »

Pelo and Spaccafumo, I am not a moderator, but I hope you don't mind me telling you that this thread is specifically for: Drivers for Puppy 5.1-5.2.8 with 2.6.33.2 kernel

Please make other requests and comments in the thread where they belong:

Pelo: http://www.murga-linux.com/puppy/viewtopic.php?t=70855

Spaccafumo: http://puppylinux.org/wikka/Puppy53?redirect=no

tallboy
True freedom is a live Puppy on a multisession CD/DVD.

Pelo

I am stuck to my chair because of my laptop wireless

#165 Post by Pelo »

tallboy wrote:Pelo and Spaccafumo, I am not a moderator, but I hope you don't mind me telling you that this thread is specifically for: Drivers for Puppy 5.1-5.2.8 with 2.6.33.2 kernel
tallboy
iwlagn :
What does that mean (here after) ?
The only solution at the moment seems to be deactivating wireless N mode and use wireless G mode only.
A lot of work has to be done here.

It will be my last try to be wirelessed with Lucid. I will stay chained to my ethernet cable ! but be cool, i just try to make things working, it's not a disaster ! Any news about this subject ? Merci les gars.
Attachments
iwlagn.png
Kernel 2.6.33.2 Lucid 528 with fluxbox
(11.97 KiB) Downloaded 1885 times

p310don
Posts: 1492
Joined: Tue 19 May 2009, 23:11
Location: Brisbane, Australia

#166 Post by p310don »

Hi there,

I have an issue with wireless support for my PC. It has Lupu 5.20 installed on it. The RTL8191SE wireless wasn't seen by Puppy at all, so I installed the PET from page two of this thread r8192se_pci-k2.6.33.2.pet It is now seen by the OS, but it won't "wake up". It just gives me an error when I try to connect to the internet with it.

I tried also using Carolina and Precise 5.71 neither of these puppies had any success with the wifi on my PC. These two more modern puppies just tell me wlan is down.

I have a temp fix of using a usb wifi which works (slowly), but it'd be nicer to use the onboard wifi.

Any help?

tempestuous
Posts: 5464
Joined: Fri 10 Jun 2005, 05:12
Location: Australia

#167 Post by tempestuous »

What's your computer? A laptop? There might be a wifi on/off switch involved, and it might be an "rfkill" issue.
To complicate matters, the standard release of Puppy 5.2.x (Lupu) did not enable the rfkill driver, so please first install my "rfkill-upgrade" dotpet from earlier in this thread -
http://www.murga-linux.com/puppy/viewto ... 093#452093
Then reboot, and run this command -

Code: Select all

rfkill list
Please report the result.

p310don
Posts: 1492
Joined: Tue 19 May 2009, 23:11
Location: Brisbane, Australia

#168 Post by p310don »

My PC is one like this.

http://au.shuttle.com/products/products ... uctId=1675

Not this model though, will have to figure that out when I get home. No switch is involved.

Will try the RFKILL update and see what happens.

Questioning the effectiveness however, as it also didn't work in later puppies. But will try tonight and report back. Thanks

User avatar
peebee
Posts: 4370
Joined: Sun 21 Sep 2008, 12:31
Location: Worcestershire, UK
Contact:

#169 Post by peebee »

tempestuous wrote:and it might be an "rfkill" issue.
Precise 5.7.1 (pae version) does have an rfkill problem - see

http://www.murga-linux.com/puppy/viewto ... &start=126
ImageLxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64

p310don
Posts: 1492
Joined: Tue 19 May 2009, 23:11
Location: Brisbane, Australia

#170 Post by p310don »

rfkill list gives me this response

Soft Blocked: No
Hard Blocked: Yes

There is no hardware switch on this machine. Nothing obvious in BIOS. Will do more research.

p310don
Posts: 1492
Joined: Tue 19 May 2009, 23:11
Location: Brisbane, Australia

#171 Post by p310don »

Could this be part of the problem?

Note the bus and description are both x
Attachments
wifi.png
(132.54 KiB) Downloaded 1013 times

tempestuous
Posts: 5464
Joined: Fri 10 Jun 2005, 05:12
Location: Australia

#172 Post by tempestuous »

p310don wrote:Hard Blocked: Yes
That means that either there's a physical wifi switch ... or the Linux operating system thinks there's a physical switch.
In the latter case, you need to do a full bios reset.

You should also consider upgrading to the latest bios version, but I don't see an upgraded bios on Shuttle's website at this stage for your model.

tempestuous
Posts: 5464
Joined: Fri 10 Jun 2005, 05:12
Location: Australia

#173 Post by tempestuous »

I see you're using the "Simple Network Wizard" - which I distrust.
You should be using the full Network Wizard.

p310don
Posts: 1492
Joined: Tue 19 May 2009, 23:11
Location: Brisbane, Australia

#174 Post by p310don »

Already tried the BIOS reset. Looked all over the machine for a switch that doesn't exist.

Using the full network wizard gives me this error screen
Attachments
wifi2.png
(152.55 KiB) Downloaded 1011 times

p310don
Posts: 1492
Joined: Tue 19 May 2009, 23:11
Location: Brisbane, Australia

#175 Post by p310don »

The solution might be in the bios update from 2011
1. Support wireless LAN always On
http://au.shuttle.com/news/productsDown ... uctId=1461

p310don
Posts: 1492
Joined: Tue 19 May 2009, 23:11
Location: Brisbane, Australia

#176 Post by p310don »

MY problem = SOLVED

Bit of a stuff around.

Installed the driver from this thread, recognised wifi module
Had to update BIOS, found out model and downloaded .exe file. Useless to me in my puppy only machine.

Booted into Hiren's boot cd mini xp. loaded the bios update. (that was a screw around, because I saved the file on my /mnt/home ext3 partition, which xp didn't see. lucky hiren's comes with ext software) Update spat out errors. Tried again, more errors. Cracked the shits, rebooted puppy, and it works.

Nice. Thanks for your help and suggestions :)

smshah26
Posts: 1
Joined: Mon 23 Sep 2013, 14:49

please help

#177 Post by smshah26 »

Dear

i installed ubunto but it does not detect my wirless internet divice wimax please help me

cy3a
Posts: 8
Joined: Sat 15 Sep 2012, 20:30

#178 Post by cy3a »

Does driver for hp1018 foo2zjs work with puppy 5.7.1?

tempestuous
Posts: 5464
Joined: Fri 10 Jun 2005, 05:12
Location: Australia

#179 Post by tempestuous »

Accidental post.

Pelo

Wireless connected Medion P7624

#180 Post by Pelo »

Puppy 5.2.8 no sound no wireless : i intalled lib firmware and modules switching the kernel to 3.0.25
Last edited by Pelo on Sat 22 Aug 2015, 04:19, edited 2 times in total.

Post Reply