Puppy Linux Discussion Forum Forum Index Puppy Linux Discussion Forum
Puppy HOME page : puppylinux.com
"THE" alternative forum : puppylinux.info
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

The time now is Sat 30 Aug 2014, 10:37
All times are UTC - 4
 Forum index » House Training » Bugs ( Submit bugs )
Slacko Puppy version 5.5 - Unable to Connect
Moderators: Flash, Ian, JohnMurga
Post_new_topic   Reply_to_topic View_previous_topic :: View_next_topic
Page 2 of 2 Posts_count   Goto page: Previous 1, 2
Author Message
01micko


Joined: 11 Oct 2008
Posts: 7794
Location: qld

PostPosted: Wed 11 Sep 2013, 22:09    Post_subject:  

Ok, I'll take a look. I had an nvidia board which I was developing in but it died so this seems a little unusual to be unsupported (or flakey support to be more correct).. maybe the hardware is crap? I say that because my board was only 3 years old and was aging badly, sound died, one of the RAM slots died, overheating, especially in Windows... wasn't worth keeping.

flywire wrote:
Can I cut and paste to/from the console?


Hightlight text and middle click, or if no middle button/scroll wheel click left and right buttons simultaneously.

LATER:

Hmmm.. definitely a weird problem..
Code:
[  545.956313] forcedeth 0000:00:07.0: eth0: link down
[  547.795831] forcedeth 0000:00:07.0: eth0: link up
[  567.978180] forcedeth 0000:00:07.0: eth0: link down
[  569.757710] forcedeth 0000:00:07.0: eth0: link up
[  589.569048] forcedeth 0000:00:07.0: eth0: link down
[  591.401016] forcedeth 0000:00:07.0: eth0: link up
[  607.050450] forcedeth 0000:00:07.0: eth0: link down
[  608.832934] forcedeth 0000:00:07.0: eth0: link up
[  630.160157] forcedeth 0000:00:07.0: eth0: link down
[  631.930837] forcedeth 0000:00:07.0: eth0: link up
[  646.494732] forcedeth 0000:00:07.0: eth0: link down
[  648.335874] forcedeth 0000:00:07.0: eth0: link up
[  673.732904] forcedeth 0000:00:07.0: eth0: link down
[  675.518657] forcedeth 0000:00:07.0: eth0: link up
[  759.587675] forcedeth 0000:00:07.0: eth0: link down
[  761.378353] forcedeth 0000:00:07.0: eth0: link up
[  791.709145] forcedeth 0000:00:07.0: eth0: link down
[  793.474254] forcedeth 0000:00:07.0: eth0: link up
[  800.861516] forcedeth 0000:00:07.0: eth0: link down
[  802.680700] forcedeth 0000:00:07.0: eth0: link up
[  910.439567] forcedeth 0000:00:07.0: eth0: link down
[  912.284642] forcedeth 0000:00:07.0: eth0: link up
[  914.158988] forcedeth 0000:00:07.0: eth0: link down
[  915.943754] forcedeth 0000:00:07.0: eth0: link up
[  927.720709] forcedeth 0000:00:07.0: eth0: link down
[  929.564487] forcedeth 0000:00:07.0: eth0: link up
[  940.073652] forcedeth 0000:00:07.0: eth0: link down
[  941.863674] forcedeth 0000:00:07.0: eth0: link up
[  948.127715] forcedeth 0000:00:07.0: eth0: link down
[  949.916740] forcedeth 0000:00:07.0: eth0: link up
[ 1020.323734] forcedeth 0000:00:07.0: eth0: link down
[ 1021.884977] forcedeth 0000:00:07.0: eth0: link up
[ 1037.292195] forcedeth 0000:00:07.0: eth0: link down
[ 1039.084509] forcedeth 0000:00:07.0: eth0: link up
[ 1049.880478] forcedeth 0000:00:07.0: eth0: link down
[ 1051.666891] forcedeth 0000:00:07.0: eth0: link up
[ 1077.972467] forcedeth 0000:00:07.0: eth0: link down
[ 1079.751992] forcedeth 0000:00:07.0: eth0: link up
[ 1084.745300] forcedeth 0000:00:07.0: eth0: link down
[ 1086.593983] forcedeth 0000:00:07.0: eth0: link up
[ 1147.286828] forcedeth 0000:00:07.0: eth0: link down


Please check your cables as the pattern is rather erratic. Not saying it is cable related but it is very weird.
Screenshot_2013-09-12_12-15-37.png
 Description   
 Filesize   4.87 KB
 Viewed   473 Time(s)

Screenshot_2013-09-12_12-15-37.png


_________________
Woof Mailing List | keep the faith Cool |
Back to top
View user's profile Send_private_message Visit_website 
01micko


Joined: 11 Oct 2008
Posts: 7794
Location: qld

PostPosted: Wed 11 Sep 2013, 22:42    Post_subject:  

flywire,

You are not alone, some others have reported this since kernel 3.2.

Here is something to try.

At terminal type this.
Code:
echo  "options forcedeth msi=0 msix=0" > /etc/modprobe.d/forcedeth.conf


Reboot and see what happens.

Ref

Good luck!

_________________
Woof Mailing List | keep the faith Cool |
Back to top
View user's profile Send_private_message Visit_website 
James C


Joined: 26 Mar 2009
Posts: 5722
Location: Kentucky

PostPosted: Wed 11 Sep 2013, 23:05    Post_subject:  

For what it's worth, no troubles here in Slacko 5.5 or 5.6..... using 5.5 right now.

Code:
# lspci -nn

00:07.0 Bridge [0680]: nVidia Corporation MCP61 Ethernet [10de:03ef] (rev a2)


Code:
# uname -r
3.2.33-4g
#
Back to top
View user's profile Send_private_message 
James C


Joined: 26 Mar 2009
Posts: 5722
Location: Kentucky

PostPosted: Wed 11 Sep 2013, 23:17    Post_subject:  

From 5.6 .....

Code:
# uname -r
3.4.52
#


Have had no problems.


Code:
[   16.324237] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[   16.324398] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[   16.324406] forcedeth 0000:00:07.0: setting latency timer to 64
[   16.847318] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:25:22:61:55:fc
[   16.847323] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
[   16.847668] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   16.847915] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[   16.848231] ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 21
[   16.848242] nvidia 0000:00:0d.0: setting latency timer to 64
[   16.848247] vgaarb: device changed decodes: PCI:0000:00:0d.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   16.848466] NVRM: loading NVIDIA UNIX x86 Kernel Module  173.14.37  Wed Mar  6 16:56:05 PST 2013
[   17.222693] forcedeth 0000:00:07.0: irq 43 for MSI/MSI-X
[   17.222735] forcedeth 0000:00:07.0: eth0: MSI enabled
[   17.222991] forcedeth 0000:00:07.0: eth0: no link during initialization
[   17.234440] forcedeth 0000:00:07.0: irq 43 for MSI/MSI-X
[   17.234480] forcedeth 0000:00:07.0: eth0: MSI enabled
[   17.234735] forcedeth 0000:00:07.0: eth0: no link during initialization
[   17.734526] ip_tables: (C) 2000-2006 Netfilter Core Team
[   17.741448] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   18.420785] forcedeth 0000:00:07.0: eth0: link up


EDIT:

Mobo is about 1 yr old.
Back to top
View user's profile Send_private_message 
01micko


Joined: 11 Oct 2008
Posts: 7794
Location: qld

PostPosted: Thu 12 Sep 2013, 00:47    Post_subject:  

James C wrote:
Mobo is about 1 yr old.


Apparently it is a BIOS problem and updating fixes it, I guess James yours already has the newer BIOS.

Quote:
P23 bios from EVGA fixed the ethernet bug


Ref

So, flywire, the real solution is to update the BIOS, however the above work around I supplied should work.

_________________
Woof Mailing List | keep the faith Cool |
Back to top
View user's profile Send_private_message Visit_website 
flywire

Joined: 15 May 2013
Posts: 14

PostPosted: Thu 12 Sep 2013, 09:34    Post_subject:  

01micko wrote:
Apparently it is a BIOS problem and updating fixes it, I guess James yours already has the newer BIOS.

Quote:
P23 bios from EVGA fixed the ethernet bug

Ref

So, flywire, the real solution is to update the BIOS, however the above work around I supplied should work.


Well the latest BIOS from the ASUS website hasn't fixed it:

-BIOS-
Date : 10/29/2008
Vendor : American Megatrends Inc. (www.ami.com)
Version : 0602
-Board-
Name : M2N-MX SE Plus
Vendor : ASUSTeK Computer INC. (SEAGATE, www.seagate.com)

I am away for about 10 days and will give the code a go then. It seems that I can't do this fix while running in RAM.

Very much appreciated to all, especially Mick and James.
Back to top
View user's profile Send_private_message 
01micko


Joined: 11 Oct 2008
Posts: 7794
Location: qld

PostPosted: Thu 12 Sep 2013, 18:45    Post_subject:  

flywire wrote:

Well the latest BIOS from the ASUS website hasn't fixed it:

Bummer, shame some vendors don't support their boards properly. It was around 2008 when the fix emerged.

flywire wrote:

I am away for about 10 days and will give the code a go then. It seems that I can't do this fix while running in RAM.

You probably could append the options to your kernel line, but slightly differently:
Code:
puppy pfix=ram forcedeth.msi=0 forcedeth.msix=0

or
Code:
puppy pfix=ram forcedeth.msi=0,msix=0


One of those *should* work, no guarantees.

_________________
Woof Mailing List | keep the faith Cool |
Back to top
View user's profile Send_private_message Visit_website 
ThoriumBlvd


Joined: 04 Oct 2013
Posts: 124
Location: N.E. USA

PostPosted: Thu 07 Nov 2013, 13:32    Post_subject:  

flywire, I must ask three Q's...

1.) Make and model of the computer in question is ...?
2.) Wifi/ethernet board installed is...?
3.) Dual-boot XP and Linux?

_________________

Back to top
View user's profile Send_private_message 
flywire

Joined: 15 May 2013
Posts: 14

PostPosted: Fri 11 Apr 2014, 22:54    Post_subject:  

It is an assembled PC: http://ip-208-109-22-214.ip.secureserver.net/puppy/viewtopic.php?p=725258&sid=51f29ffb2149ca6970ee0138c3417268#725258
Integrated NIC, no wifi, boot from CD.

It seems that the problem is a bios issue with this motherboard and there are no upgrades available. Workaround from 01micko didn't work so I decided that I would give linux a miss until I get another computer with a different motherboard.

Thanks to all as I had no idea what was going on and at least this gives me the confidence to try again later.
Back to top
View user's profile Send_private_message 
Display_posts:   Sort by:   
Page 2 of 2 Posts_count   Goto page: Previous 1, 2
Post_new_topic   Reply_to_topic View_previous_topic :: View_next_topic
 Forum index » House Training » Bugs ( Submit bugs )
Jump to:  

Rules_post_cannot
Rules_reply_cannot
Rules_edit_cannot
Rules_delete_cannot
Rules_vote_cannot
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group
[ Time: 0.0871s ][ Queries: 13 (0.0055s) ][ GZIP on ]