Seems OK, except it does not load the firmware for my USB DVB-T stick.
DMESG indicates the device is found (gives correct , hardinfo gives correct information, but no firmware is looked for in lib/firmware. The stick is it-9135 based, using firmware it9137-01.fw.
Posting this from Mint which works; also Ubuntu and Puppy Carolina correctly see the stick and load the firmware. This is dmesg from Mint:
[10944.179969] usb 2-1.5: new high-speed USB device number 14 using ehci_hcd
[10944.275251] it913x: Chip Version=01 Chip Type=9135
[10944.276986] it913x: Dual mode=0 Remote=5 Tuner Type=37
[10944.278229] dvb-usb: found a 'ITE 9135 Generic' in cold state, will try to load a firmware
[10944.280802] dvb-usb: downloading firmware from file 'dvb-usb-it9137-01.fw'
I will follow with a post from Puppy next.
Something fails to load firmware
cool good luck.. One thing I like about lightweight puppy was its ability to run from RAM thereby freeing up disk IO for capturing hdtv video streams without interference. Was able to use a very low powered CPU on a very old miniPC to capture OTA tv when no other linux could.
You should be able to copy firmware over from mint... If you can just grab all. my older capture card firmware loaded another bit of firmware that I did not expect took months to figure out.
You should be able to copy firmware over from mint... If you can just grab all. my older capture card firmware loaded another bit of firmware that I did not expect took months to figure out.
Re: Something fails to load firmware
corevalue wrote:Seems OK, except it does not load the firmware for my USB DVB-T stick.
DMESG indicates the device is found (gives correct , hardinfo gives correct information, but no firmware is looked for in lib/firmware. The stick is it-9135 based, using firmware it9137-01.fw.
Posting this from Mint which works; also Ubuntu and Puppy Carolina correctly see the stick and load the firmware. This is dmesg from Mint:
[10944.179969] usb 2-1.5: new high-speed USB device number 14 using ehci_hcd
[10944.275251] it913x: Chip Version=01 Chip Type=9135
[10944.276986] it913x: Dual mode=0 Remote=5 Tuner Type=37
[10944.278229] dvb-usb: found a 'ITE 9135 Generic' in cold state, will try to load a firmware
[10944.280802] dvb-usb: downloading firmware from file 'dvb-usb-it9137-01.fw'
I will follow with a post from Puppy next.
Puppy Linux Blog - contact me for access
CURRENT_PUPPY has :
bash-3.2# find -name "dvb-usb*" | sort
./woof-code/kernel-skeleton/lib/firmware/dvb-usb-af9015.fw
./woof-code/kernel-skeleton/lib/firmware/dvb-usb-bluebird-01.fw
./woof-code/kernel-skeleton/lib/firmware/dvb-usb-dib0700-1.10.fw
./woof-code/kernel-skeleton/lib/firmware/dvb-usb-dibusb-5.0.0.11.fw
./woof-code/kernel-skeleton/lib/firmware/dvb-usb-dibusb-6.0.0.8.fw
./woof-code/kernel-skeleton/lib/firmware/dvb-usb-dtt200u-01.fw
./woof-code/kernel-skeleton/lib/firmware/dvb-usb-umt-010-02.fw
./woof-code/kernel-skeleton/lib/firmware/dvb-usb-vp702x-01.fw
./woof-code/kernel-skeleton/lib/firmware/dvb-usb-vp7045-01.fw
./woof-code/kernel-skeleton/lib/firmware/dvb-usb-wt220u-01.fw
./woof-code/kernel-skeleton/lib/firmware/dvb-usb-wt220u-02.fw
https://github.com/puppylinux-woof-CE/woof-CE branch firmware
MY_SELF has :
bash-3.2# pwd
/lib/modules/3.4.9-KRG-iCore2-smp-pae/firmware
bash-3.2# find -type f | wc -l
146
bash-3.2# find -name "dvb-usb*"
VOID dvb-usb* firmware in the linux kernel source .
http://www.linuxtv.org/wiki/index.php/ITE_IT9135
http://kworld.server261.com/kworld/CD/ITE_TiVme/V1.00/
bash-3.2# find -name "dvb-usb*" | sort
./woof-code/kernel-skeleton/lib/firmware/dvb-usb-af9015.fw
./woof-code/kernel-skeleton/lib/firmware/dvb-usb-bluebird-01.fw
./woof-code/kernel-skeleton/lib/firmware/dvb-usb-dib0700-1.10.fw
./woof-code/kernel-skeleton/lib/firmware/dvb-usb-dibusb-5.0.0.11.fw
./woof-code/kernel-skeleton/lib/firmware/dvb-usb-dibusb-6.0.0.8.fw
./woof-code/kernel-skeleton/lib/firmware/dvb-usb-dtt200u-01.fw
./woof-code/kernel-skeleton/lib/firmware/dvb-usb-umt-010-02.fw
./woof-code/kernel-skeleton/lib/firmware/dvb-usb-vp702x-01.fw
./woof-code/kernel-skeleton/lib/firmware/dvb-usb-vp7045-01.fw
./woof-code/kernel-skeleton/lib/firmware/dvb-usb-wt220u-01.fw
./woof-code/kernel-skeleton/lib/firmware/dvb-usb-wt220u-02.fw
https://github.com/puppylinux-woof-CE/woof-CE branch firmware
MY_SELF has :
bash-3.2# pwd
/lib/modules/3.4.9-KRG-iCore2-smp-pae/firmware
bash-3.2# find -type f | wc -l
146
bash-3.2# find -name "dvb-usb*"
VOID dvb-usb* firmware in the linux kernel source .
http://www.linuxtv.org/wiki/index.php/ITE_IT9135
Code: Select all
#!/gin/pearl
sub it9137 {
my $url = "http://kworld.server261.com/kworld/CD/ITE_TiVme/V1.00/";
my $zipfile = "Driver_V10.323.1.0412.100412.zip";
my $hash = "79b597dc648698ed6820845c0c9d0d37";
my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 0);
my $drvfile = "Driver_V10.323.1.0412.100412/Data/x86/IT9135BDA.sys";
my $fwfile = "dvb-usb-it9137-01.fw";
checkstandard();
wgetfile($zipfile, $url . $zipfile);
verify($zipfile, $hash);
unzip($zipfile, $tmpdir);
extract("$tmpdir/$drvfile", 69632, 5731, "$fwfile");
"$fwfile"
}
«Give me GUI or Death» -- I give you [[Xx]term[inal]] [[Cc]on[s][ole]] .
Macpup user since 2010 on full installations.
People who want problems with Puppy boot frugal :P
Macpup user since 2010 on full installations.
People who want problems with Puppy boot frugal :P