I'm interested in using Slacko Puppy Linux 5.7 (frugal) on EeePC 901 and to connect to WPA2 encrypted WiFi, but I'm not getting to connect.
The wireless device using the EeePC is rt2860pci.
With Puppy Linux 5.2.8 (frugal) on the EeePC 901 I can connect to WPA2 encrypted WiFi.
The difference I find is that Lucid Puppy Linux 5.2.8 kernel using linux 2.6.33, however, Slacko 5.7 uses the Linux kernel 3.4.82.
Please, can someone help me?
-----
EeePC 901 con rt2860 no funciona con el cifrado WPA2
Estoy interesado en usar Puppy Linux Slacko 5.7 (frugal) en un EeePC 901 y poder conectar con WiFi encriptadas con WPA2, pero no lo estoy consiguiendo.
El dispositivo wifi que usa el EeePC es el rt2860pci.
Con Lucid Puppy Linux 5.2.8 (frugal) en el EeePC 901 sí puedo conectar con WiFi encriptadas con WPA2.
La diferencia que encuentro es que Puppy Linux 5.2.8 usa el kernel linux 2.6.33, sin embargo, Slacko 5.7 usa el kernel linux 3.4.82.
¿Alguien puede ayudarme por favor?
Slacko 5.7 - EeePC 901 - WiFi rt2860pci - WPA2
Give details.
You do what step?
You see what?
Any error messages?
You do what step?
You see what?
Any error messages?
This does not tell us what you are doing to connect or what network connection program you are using.but I'm not getting to connect.
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
Back before I sold my eeepc with Salck0 5.7 installed.
It connected just fine via wpa-psk on my home wireless network just fine using Barrys simple Network Manager.
My wireless chip on my eeepc was
though. Newer kernel in Slack0 5.7 should be just fine. Did you md5sum
the Slack0 iSO before installing in case that is the glitch.
It connected just fine via wpa-psk on my home wireless network just fine using Barrys simple Network Manager.
My wireless chip on my eeepc was
Code: Select all
Network: Card-1 Realtek RTL8187SE Wireless LAN Controller at port d800 BusID: 01:00.0
the Slack0 iSO before installing in case that is the glitch.
Slacko 5.7 - EeePC 901 - WiFi rt2860pci - WPA2
Ok thanks, here are some information...bigpup wrote:Give details.
You do what step?
You see what?
Any error messages?
This does not tell us what you are doing to connect or what network connection program you are using.but I'm not getting to connect.
At BIOS Setup... On board WLAN [Enabled]
-- Network Devices --
Network controller [0280]: Ralink corp. RT2860 [1814:0781]
. Kernel Driver: rt2800pci
. Memory Used: 6.66 KB
. Path: /lib/modules/3.4.82/kernel/drivers/net/wireless/rt2x00/rt2800pci.ko
. Description: Ralink RT2800 PCI & PCMCIA Wireless LAN driver.
. Driver Version: 2.3.0
Ethernet controller [0200]: Atheros Communications AR8121/AR8113/AR8114 Gigabit or Fast Ethernet [1969:1026] (rev b0)
. Kernel Driver: ATL1E
Module Name: rt2800lib
Memory Used: 33.78 KB
Path: /lib/modules/3.4.82/kernel/drivers/net/wireless/rt2x00/rt2800lib.ko
License: GPL
Description: Ralink RT2800 library
Version: 2.3.0
Author: http://rt2x00.serialmonkey.com, Bartlomiej Zolnierkiewicz
Srcversion: B5061B6EB9497799A4EB0C2
Dependencies: rt2x00lib, mac80211, crc-ccitt
Built-in: Yes
Version Magic: 3.4.82 SMP mod_unload modversions 686
Used by: 1 rt2800pci
Module Name: rt2800pci
Memory Used: 6.66 KB
Path: /lib/modules/3.4.82/kernel/drivers/net/wireless/rt2x00/rt2800pci.ko
License: GPL
Firmware: rt2860.bin
Description: Ralink RT2800 PCI & PCMCIA Wireless LAN driver.
Version: 2.3.0
Author: http://rt2x00.serialmonkey.com
Srcversion: 257CF7D872DC2076021C2C7
Dependencies: rt2x00lib, rt2800lib, rt2x00pci, eeprom_93cx6
Built-in: Yes
Version Magic: 3.4.82 SMP mod_unload modversions 686
Used by: 0
Module Name: rt2x00lib
Memory Used: 24.38 KB
Path: /lib/modules/3.4.82/kernel/drivers/net/wireless/rt2x00/rt2x00lib.ko
License: GPL
Description: rt2x00 library
Version: 2.3.0
Author: http://rt2x00.serialmonkey.com
Srcversion: 8D3366BB47677E386524A23
Dependencies: mac80211, cfg80211
Built-in: Yes
Version Magic: 3.4.82 SMP mod_unload modversions 686
Used by: 3 rt2x00pci, rt2800lib, rt2800pci
Module Name: rt2x00pci
Memory Used: 3.45 KB
Path: /lib/modules/3.4.82/kernel/drivers/net/wireless/rt2x00/rt2x00pci.ko
License: GPL
Description: rt2x00 pci library
Version: 2.3.0
Author: http://rt2x00.serialmonkey.com
Srcversion: 546693F29C378127112C0A6
Dependencies: rt2x00lib, mac80211
Built-in: Yes
Version Magic: 3.4.82 SMP mod_unload modversions 686
Used by: 1 rt2800pci
try 1: simple network setup
sns_wireless_log
Information about this interface:
Interface: wlan0 Driver: rt2800pci Bus: pci MacAddress: 00:15:AF:xx:xx:xx
Description: Ralink RT2800 PCI PCMCIA Wireless LAN driver.
STEP1a: ifconfig wlan0 up
ifconfig: SIOCSIFFLAGS: No such file or directory
*********************************************************
LAST 10 LINES of /var/log/messages:
May 14 18:37:21 pls901 daemon.info acpid: received event "hotkey ATKD 00000015 0000004b"
May 14 18:37:21 pls901 daemon.info acpid: notifying client 5138[0:0]
May 14 18:37:21 pls901 daemon.info acpid: completed event "hotkey ATKD 00000015 0000004b"
May 14 18:37:21 pls901 daemon.info acpid: received event "hotkey ATKD 00000015 0000004c"
May 14 18:37:21 pls901 daemon.info acpid: notifying client 5138[0:0]
May 14 18:37:21 pls901 daemon.info acpid: completed event "hotkey ATKD 00000015 0000004c"
May 14 18:37:21 pls901 daemon.info acpid: received event "hotkey ATKD 00000015 0000004d"
May 14 18:37:21 pls901 daemon.info acpid: notifying client 5138[0:0]
May 14 18:37:21 pls901 daemon.info acpid: completed event "hotkey ATKD 00000015 0000004d"
May 14 19:23:33 pls901 user.err kernel: [ 2866.391660] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
Retry
sns_wireless_log
Information about this interface:
Interface: wlan0 Driver: rt2800pci Bus: pci MacAddress: 00:15:AF:xx:xx:xx
Description: Ralink RT2800 PCI PCMCIA Wireless LAN driver.
STEP1a: ifconfig wlan0 up
ifconfig: SIOCSIFFLAGS: No such file or directory
*********************************************************
LAST 10 LINES of /var/log/messages:
May 14 18:37:21 pls901 daemon.info acpid: notifying client 5138[0:0]
May 14 18:37:21 pls901 daemon.info acpid: completed event "hotkey ATKD 00000015 0000004b"
May 14 18:37:21 pls901 daemon.info acpid: received event "hotkey ATKD 00000015 0000004c"
May 14 18:37:21 pls901 daemon.info acpid: notifying client 5138[0:0]
May 14 18:37:21 pls901 daemon.info acpid: completed event "hotkey ATKD 00000015 0000004c"
May 14 18:37:21 pls901 daemon.info acpid: received event "hotkey ATKD 00000015 0000004d"
May 14 18:37:21 pls901 daemon.info acpid: notifying client 5138[0:0]
May 14 18:37:21 pls901 daemon.info acpid: completed event "hotkey ATKD 00000015 0000004d"
May 14 19:23:33 pls901 user.err kernel: [ 2866.391660] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
May 14 19:27:00 pls901 user.err kernel: [ 3073.755022] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
try 2: frisbee
No wireless extensions detected
Frisbee - Wireless Diagnostic Tools
Wpa_supplicant Status:
-------------------------------------------------
Not Active
-------------------------------------------------
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
wlan0 Link encap:Ethernet HWaddr 00:15:AF:xx:xx:xx
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Pdiag Diagnostic Information Capture > pdiag-20140513.tar.gz
try 3: network wizard
Error!
Failed to raise interface wlan0.
Failed command was: ifconfig wlan0 up
Error returned was:
ifconfig: SIOCSIFFLAGS: No such file or directory
More info:
uname -r
3.4.82
lsmod | grep rt
rt2800pci 6818 0
rt2800lib 34594 1 rt2800pci
rt2x00pci 3528 1 rt2800pci
rt2x00lib 24969 3 rt2x00pci,rt2800lib,rt2800pci
mac80211 175139 3 rt2x00lib,rt2x00pci,rt2800lib
crc_ccitt 1024 1 rt2800lib
eeprom_93cx6 1494 1 rt2800pci
cfg80211 117933 3 wl,mac80211,rt2x00lib
agpgart 17718 3 drm,intel_agp,intel_gtt
dmesg before...
.
.
.
[ 31.047729] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 31.069791] nf_conntrack version 0.5.0 (16001 buckets, 64004 max)
[ 31.435184] EXT4-fs (loop1): re-mounted. Opts: data=ordered
[ 33.442322] [drm] Changing LVDS panel from (-hsync, +vsync) to (-hsync, -vsync)
dmesg after...
.
.
.
[ 31.047729] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 31.069791] nf_conntrack version 0.5.0 (16001 buckets, 64004 max)
[ 31.435184] EXT4-fs (loop1): re-mounted. Opts: data=ordered
[ 33.442322] [drm] Changing LVDS panel from (-hsync, +vsync) to (-hsync, -vsync)
[ 2866.391660] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
[ 3073.755022] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
[ 4464.537577] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
[ 4464.759879] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
[ 4498.619783] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
[ 4981.622677] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
[ 4981.641002] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
[ 5091.322534] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
Last edited by dll on Wed 14 May 2014, 06:44, edited 2 times in total.
-
bark_bark_bark
- Posts: 1885
- Joined: Tue 05 Jun 2012, 12:17
- Location: Wisconsin USA
I am finding now a days in the 'nix world, wifi support is getting crappier and crappier over time. I just hope it doesn't get as bad as it was in '06-09
Last edited by bark_bark_bark on Wed 14 May 2014, 12:13, edited 1 time in total.
....
there are any PET for slacko 5.7?
tempestuous posted (at Thu 01 Oct 2009, 05:31 - http://www.murga-linux.com/puppy/viewto ... 450#346450) a rt3562sta-v2.3.0.0-k2.6.30.5.pet for Puppy Linux 4.3
there are any PET for Slacko 5.7?
is it valid for Slacko 5.7?rt3562sta for the RT3060/RT3062/RT3562/RT2860/RT2760/RT2890/RT2790 PCI(e) devices
there are any PET for Slacko 5.7?
The lack of firmware being requested is killing you.May 14 19:23:33 pls901 user.err kernel: [ 2866.391660] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
May 14 19:27:00 pls901 user.err kernel: [ 3073.755022] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
http://murga-linux.com/puppy/viewtopic. ... 945#743945
Why I don't know.
http://murga-linux.com/puppy/viewtopic. ... 877#610877
Hopefully some other member more knowledgeable than me can say why.
Module Name: rt2800pci
Memory Used: 6.66 KB
Path: /lib/modules/3.4.82/kernel/drivers/net/wireless/rt2x00/rt2800pci.ko
License: GPL
Firmware: rt2860.bin
Description: Ralink RT2800 PCI & PCMCIA Wireless LAN driver.
Version: 2.3.0
Author: http://rt2x00.serialmonkey.com
Srcversion: 257CF7D872DC2076021C2C7
Dependencies: rt2x00lib, rt2800lib, rt2x00pci, eeprom_93cx6
Built-in: Yes
Version Magic: 3.4.82 SMP mod_unload modversions 686
Used by: 0
Just checked my wireless usb in Carolina 1.2. Card 1 is the USB
Code: Select all
# inxi -N
Network: Card-1: Ralink RT2561/RT61 802.11g PCI driver: rt61pci
Card-2: Intel 82566DM-2 Gigabit Network Connection driver: e1000e
# inxi -S
System: Host: puppypc13232 Kernel: 3.2.13-ski i686 (32 bit)
Desktop: Xfce 4.10.0 Distro: Carolina Linux Linux 3.2.13-ski [ arch]