How to connect to 3g internet from TahrPup?
How to connect to 3g internet from TahrPup?
I was using this tutorial to connect to gprs using my nokia phone and bluetooth:
http://www.zrayumtech.com/2012/05/bluet ... linux.html
but when i tried it to connect to 3g using my windows phone and bluetooth it failed, I was able to get the hcitool scan working and got the mac address and the channel number but the script fails to connect to 3g internet. Internet sharing on my windows phone through bluetooth is on btw.
Any help is really appreciated.
http://www.zrayumtech.com/2012/05/bluet ... linux.html
but when i tried it to connect to 3g using my windows phone and bluetooth it failed, I was able to get the hcitool scan working and got the mac address and the channel number but the script fails to connect to 3g internet. Internet sharing on my windows phone through bluetooth is on btw.
Any help is really appreciated.
hi jss83
in the ppm there's a blueman package in the puppy-tahr repo in the network section. (update repos if not there)
it throws an error on startup but still works. pair your phone..then right click on your device and choose 'network access point' . if using Frisbee as your network manager it will automatically connect to bnep0, not sure how puppy's other network managers fair with it
in the ppm there's a blueman package in the puppy-tahr repo in the network section. (update repos if not there)
it throws an error on startup but still works. pair your phone..then right click on your device and choose 'network access point' . if using Frisbee as your network manager it will automatically connect to bnep0, not sure how puppy's other network managers fair with it
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Thank you sir, I will do this and report back.666philb wrote:hi jss83
in the ppm there's a blueman package in the puppy-tahr repo in the network section. (update repos if not there)
it throws an error on startup but still works. pair your phone..then right click on your device and choose 'network access point' . if using Frisbee as your network manager it will automatically connect to bnep0, not sure how puppy's other network managers fair with it
- LazY Puppy
- Posts: 1934
- Joined: Fri 21 Nov 2014, 18:14
- Location: Germany
Just install the attached package.
Enter just your device like /dev/ttyUSB0 or similar (don't use /dev/ttyS0)
Enter your APN like internet.e-plus.de etc...
Should work out of the box.
If your tahr is tahr64 604 then you'll need the firmware driver sfs which is to find at ibiblio repo for tahr64.
I'm currently first time online using tahr64 and the attached package.
Hope this helps.
Enter just your device like /dev/ttyUSB0 or similar (don't use /dev/ttyS0)
Enter your APN like internet.e-plus.de etc...
Should work out of the box.
If your tahr is tahr64 604 then you'll need the firmware driver sfs which is to find at ibiblio repo for tahr64.
I'm currently first time online using tahr64 and the attached package.
Hope this helps.
Last edited by LazY Puppy on Sat 12 Dec 2015, 23:18, edited 1 time in total.
RSH
"you only wanted to work your Puppies in German", "you are a separatist in that you want Germany to secede from Europe" (musher0) :lol:
No, but I gave my old drum kit away for free to a music store collecting instruments for refugees! :wink:
"you only wanted to work your Puppies in German", "you are a separatist in that you want Germany to secede from Europe" (musher0) :lol:
No, but I gave my old drum kit away for free to a music store collecting instruments for refugees! :wink:
- LazY Puppy
- Posts: 1934
- Joined: Fri 21 Nov 2014, 18:14
- Location: Germany
Sorry, I did not notice that you do connect by bluetooth. Just noticed the title and assumed you wold connect to the internet by GPRS USB Modem like I do.jss83 wrote:It connects through blueman but no site opens up and I think it's due to the error blueman shows:
failed to apply network settings'
This shows up everytime opening blueman.
Probably getting in contact (PM?) to 666philb who is the creator of tahr puppy.
RSH
"you only wanted to work your Puppies in German", "you are a separatist in that you want Germany to secede from Europe" (musher0) :lol:
No, but I gave my old drum kit away for free to a music store collecting instruments for refugees! :wink:
"you only wanted to work your Puppies in German", "you are a separatist in that you want Germany to secede from Europe" (musher0) :lol:
No, but I gave my old drum kit away for free to a music store collecting instruments for refugees! :wink:
Here is some info about your error and using Blueman.
http://www.murga-linux.com/puppy/viewtopic.php?t=82633
http://www.murga-linux.com/puppy/viewtopic.php?t=82633
This does not apply to you. You are already using JWM.select menu go to setting and select wm switcher, select jwm and press Restart X
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
Keep in mind this info was written to be used in Lucid Puppy.
roxterm is a version of a Linux terminal.
It is not in all versions of Puppy.
In Tahrpup use the console or menu->Utility->URXVT terminal.
roxterm is a version of a Linux terminal.
It is not in all versions of Puppy.
In Tahrpup use the console or menu->Utility->URXVT terminal.
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)