light-49.0 mozilla browser for 32-bit Puppies as sfs or pet

Message

Semme · #41 Post by **Semme** » Wed 22 Feb 2017, 19:40

In case you missed it Backi, that post was for YOU!

backi · #42 Post by **backi** » Wed 22 Feb 2017, 19:43

Hi Semme !

Do you mean in version 48 audio on youtube works ?
Where do i get it ?
Thanks

Semme · #43 Post by **Semme** » Wed 22 Feb 2017, 19:49

That's what I said.

Now let me guess, you run private browsing mode enabled, correct?

No?

Is your sound card device zero?

Code: Select all

cat /proc/asound/cards

backi · #44 Post by **backi** » Wed 22 Feb 2017, 19:58

Hi !

cat /proc/asound/cards

root# cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xff63c000 irq 43
1 [pcsp ]: PC-Speaker - pcsp
Internal PC-Speaker at port 0x61

But me anyway dont care if sound or not on youtube .
Just copy URL from Youtube video and paste into
Smplayer Menu ---open >URL .....

is anyway better watching Videos on Youtube with Smplayer

Semme · #45 Post by **Semme** » Wed 22 Feb 2017, 20:02

Zero is good (I think). What about my other question?

keniv · #46 Post by **keniv** » Wed 22 Feb 2017, 20:06

@watchdog
I've installed racy 5.5. I'm posting from it now. Seems OK on this machine. I've installed your .pet.

Remember that dbus and dbus-glib from wary's repository are required.

I've installed dbus-1.2.4.2permissive-1-w5.pet and
dbus-glib-0.82-w5.pet. With the first I got a message to say I had to reboot before it would work. I am just about to do that.

Ken.

backi · #47 Post by **backi** » Wed 22 Feb 2017, 20:11

Hi Semme !

you run private browsing mode enabled, correct?

No

Maybe somebody else is encountering the same problem .

But me anyway dont care if sound or not on youtube .
Just copy URL from Youtube video and paste it into

Smplayer----Menu ---open >URL .....

is anyway better watching Videos on Youtube with Smplayer.

Semme · #48 Post by **Semme** » Wed 22 Feb 2017, 20:22

Maybe, but you didn't specify your version or whether YouTube failed with add-ons enabled or disabled.

Works fine for me without Flash. Besides, isn't YT all HTML5 these days?

Either way, I'll let it go..

backi · #49 Post by **backi** » Wed 22 Feb 2017, 20:33

Hi Semme !
Thanks for your good will ......

Tried with Add Ons disabled ......Video works but no sound ......

Not so important .....

keniv · #50 Post by **keniv** » Wed 22 Feb 2017, 20:54

@watchdog
Sorry but didn't work. Below is output from terminal.

Code: Select all

# light
/usr/bin/light: line 3: 10350 Illegal instruction     /lib/light/glibc219/lib/ld-linux.so.2 --library-path /lib/light/glibc219/lib:/lib/light/glibc219/usr/lib:/lib/light/glibc219/libstdc++:/usr/X11R7/lib:/lib/light /lib/light/light "$@"

Can you tell me if there is a way to fix this?

Ken.

Pelo · #51 Post by **Pelo** » Thu 23 Feb 2017, 01:19

light crashes before having any problem with YouTube. It crashed right as soon as opening .... (Pupjibaro Jessie, 6.4.2). Sorry josejp24. It was a nice try

watchdog · #52 Post by **watchdog** » Thu 23 Feb 2017, 06:14

keniv wrote:@watchdog
Sorry but didn't work. Below is output from terminal.
Code: Select all
# light
/usr/bin/light: line 3: 10350 Illegal instruction     /lib/light/glibc219/lib/ld-linux.so.2 --library-path /lib/light/glibc219/lib:/lib/light/glibc219/usr/lib:/lib/light/glibc219/libstdc++:/usr/X11R7/lib:/lib/light /lib/light/light "$@"
Can you tell me if there is a way to fix this?

Ken.

Geoffrey has sent a private message to me. My original package is working in Carolina but he suggested a one more tweak to play videos. I have repackaged light e I'm uploading it for testing. It works with my hardware using the vesa graphic driver in racy 5.5. I installed videodownloadhelper, noscript, js, ublockorigin extension and they are working. I played some videos. I don't know about your error. Uninstall the old package and install the new one from googledrive. Try the vesa driver (reboot required).

light-49.0-racy5-glibc219tweak.pet:

https://drive.google.com/file/d/0B9iMb4 ... sp=sharing

EDIT: I found this:

https://marylou.byu.edu/wiki/index.php? ... do+I+do%3F

It seems that your cpu does not like my package.

keniv · #53 Post by **keniv** » Thu 23 Feb 2017, 12:37

@watchdog
Have just come in and read your post. Thanks for all of that. I'm not using vesa as I'm sure I read it needed xorg. I'll change to versa and do the other things you recommend and report back though it will be a bit later today. Thanks again for your help with this,

Regards,

Ken.

Found time to try this. It still does not work . On trying it in a terminal I got no output! Maybe it is my processor. I have attached two images from Syst Info for the CPU. As it's an intel chip I think this would be the relevant bit of the stuff on your link.

Alternatively, if you wanted to request any intel processor except Harpertown processors, you could do it like this:

#PBS -l nodes=2:ppn=8,walltime=30:00,pmem=1gb,feature='intel:!harpertown'

I don't know if it's relevant to Syst Info data on my CPU. I'm well out of my depth here.

Ken.

keniv · #54 Post by **keniv** » Thu 23 Feb 2017, 13:56

Just realised that I forgot to change to vesa. Done that now but still get the same result as in previous post.

Ken.

watchdog · #55 Post by **watchdog** » Thu 23 Feb 2017, 17:08

There is not to be fan of light browser. I prefer palemoon which well works for old puppies on many machines. You can just use an old version of seamonkey or firefox keeping careful blocking scripts in your browsing behaviour. I just played with light browser but I think it cannot become our main browser.

keniv · #56 Post by **keniv** » Thu 23 Feb 2017, 18:15

I made a new save file. I installed only your latest pet and the two dbus pets. It did not work. Running in a terminal gave the same "illegal instruction" output. Sorry to say it's time to give up. I have gained a pet I like in Racy 5.5 which I had not tried and runs quite well on my machine. Thanks for all the help with trying to get light to work on my machine.

Regards,

Ken.

Sailor Enceladus · #57 Post by **Sailor Enceladus** » Thu 23 Feb 2017, 18:51

keniv wrote:I made a new save file. I installed only your latest pet and the two dbus pets. It did not work. Running in a terminal gave the same "illegal instruction" output. Sorry to say it's time to give up. I have gained a pet I like in Racy 5.5 which I had not tried and runs quite well on my machine. Thanks for all the help with trying to get light to work on my machine.

Regards,

Ken.

Oh, I think that's the "your CPU doesn't have SSE2 which light is compiled to require" problem:
http://murga-linux.com/puppy/viewtopic. ... 291#942291

keniv · #58 Post by **keniv** » Thu 23 Feb 2017, 23:05

Yes I'm fairly sure thats the problem. Some discussion on this in earlier posts.

Ken.

XP Refugee · #59 Post by **XP Refugee** » Sat 25 Feb 2017, 00:26

works fine in Palemoon and Firefox. Weird. I might like this Light. Acer netbook, needs all the help it can get.
lxpup 15.06 I believe.

Pelo · #60 Post by **Pelo** » Wed 08 Mar 2017, 15:55

Now in LXpup Xenial. Light 49 works very well. You Tube not tested yet. I will advise later.
Links to allociné (french movies) succeed when with Palemoon no connect (Griffith). Perhaps the browser is not guilty, but there is a difference in favour of light.. I think to remasterize LXpup with it, after checking You Tube.
Nothing bad about Palemoon, just to change my habit.

YOU TUBE : no trouble to access (LXpup Xenial.)

(old)Puppy Linux Discussion Forum

(old)Puppy Linux Discussion Forum

light-49.0 mozilla browser for 32-bit Puppies as sfs or pet

no sound on youtube

Now in LXpup Xenial. Light 49 works very well.