TazPuppy 5.0 rc2
-
- Posts: 721
- Joined: Sat 31 Mar 2018, 08:01
- Location: Rakaia
- Contact:
You did it !! Great job, many thanks !mistfire wrote:The long wait is over!
TazPup can now create savefiles and load it. You also use pfix=ram to bypass loading savefile. However reboot and shutdown requires root password if tux account is used. SVG images now working.
This is still in alpha state.
Download: https://drive.google.com/open?id=1BW7XA ... 1TxIuTaLnF
For now, tested briefly by installing a few programs, internet browsing, set up save to folder at shutdown.
Persistence seems to work fine, I found after reboot.
Fred
Good job @mistfire.
I had a quick look at TazPup in Qemu which looked pretty good so I made a frugal install to my SSD.
I must say I'm very impressed what you have manage to pack into 80M. Midori seems to work very well.
I have two monitors but it only seems to detect one of them. Is there a way around this.
I installed vlc from the repo and it installed everything including all the required dependencies. Nice.
It's already in next months newsletter.
Thanks
I had a quick look at TazPup in Qemu which looked pretty good so I made a frugal install to my SSD.
I must say I'm very impressed what you have manage to pack into 80M. Midori seems to work very well.
I have two monitors but it only seems to detect one of them. Is there a way around this.
I installed vlc from the repo and it installed everything including all the required dependencies. Nice.
It's already in next months newsletter.
Thanks
Hi @smokey, slitaz was only around 150-200Mb (including kernel modules) when expanded. It was packed using xz compression at 1Mb block size. Regarding multiple monitors, you may seek help to slitaz forum because slitaz was seated on top of puppy architecture. Around 5-7% of slitaz base was modified in order to boot and behave like puppy.
In my latest experimentation pup_event_frontend_d is now working, On the fly SFS modules loading now works. Also Im tried to apply enhancements came from puppy to make it more robust. Non-user reboot and shutdown now works without root password.
I will also try to released the base files with build scripts to those who are interested to build their own TazPup made from pristine Slitaz.
In my latest experimentation pup_event_frontend_d is now working, On the fly SFS modules loading now works. Also Im tried to apply enhancements came from puppy to make it more robust. Non-user reboot and shutdown now works without root password.
I will also try to released the base files with build scripts to those who are interested to build their own TazPup made from pristine Slitaz.
Yes, very interested in this. Some older laptops getting dusty on the shelf and this should make a perfect OS for them.mistfire wrote: I will also try to released the base files with build scripts to those who are interested to build their own TazPup made from pristine Slitaz.
Back to the good old Puppy days (okay so Slitaz, but as a project in terms of save persistence and sfs-handling and the boot mechanism, that's all Puppy advantages of course.
wiak
-
- Posts: 721
- Joined: Sat 31 Mar 2018, 08:01
- Location: Rakaia
- Contact:
@darry19662018 on my latest experiment of tazpup. Puppy Installer is now working. But I cant test the whole process because I dont have a powerful computer to perform such virtualization. I dont want to mess my real hardware. Im only have an intel atom powered netbook which I currently used to build TazPup as well as X-Slacko Slim.
The binary structure of Slitaz was very different from puppy. So I decided to run slitaz on top of puppy as pristine as possible. As of now very few files are modified on Slitaz side
The binary structure of Slitaz was very different from puppy. So I decided to run slitaz on top of puppy as pristine as possible. As of now very few files are modified on Slitaz side
-
- Posts: 721
- Joined: Sat 31 Mar 2018, 08:01
- Location: Rakaia
- Contact:
Hello mistfire
I am using tazpup-alpha3 now on a intel dualcore desktop. Booted fine, installed my keyboard. eth0 connection automatic. It works lightning fast!
I am in TazWeb browser. I don't know whethter it is different from midori.
I have tried Slitaz a long time ago, but found it a bit difficult to find my way then and it was not as gentle as Puppy for the very old hardware I had then. But this reminds me of how small and fast the old Puppies used to be. Thnx very much.
I just login as root. I got the habbit from Puppy and I really don't like that security stuff.
Could there be any reason I cannot boot it on my fairly new uefi i5 laptop?
I also do not manage to boot it from usb, not from the legacy desktop and not from the uefi laptop with legacy usb boot enabled. I used the command dd to put the image on a usb.
I am using tazpup-alpha3 now on a intel dualcore desktop. Booted fine, installed my keyboard. eth0 connection automatic. It works lightning fast!
I am in TazWeb browser. I don't know whethter it is different from midori.
I have tried Slitaz a long time ago, but found it a bit difficult to find my way then and it was not as gentle as Puppy for the very old hardware I had then. But this reminds me of how small and fast the old Puppies used to be. Thnx very much.
I just login as root. I got the habbit from Puppy and I really don't like that security stuff.
Could there be any reason I cannot boot it on my fairly new uefi i5 laptop?
I also do not manage to boot it from usb, not from the legacy desktop and not from the uefi laptop with legacy usb boot enabled. I used the command dd to put the image on a usb.
Fantastic job so far mistfire. It's looks really polished and is blazing fast.
Manual frugal install to a Sandisk 32 GB Ultra Fit Flash Drive, using UEFI boot Manager, Fat32 EFI Partition and an ext4 partition fo all data. Manually loaded intel 7265 wifi firmware. All working nicely. Having issues with saves.
Save to Folder:
Intitial save to folder works, however subsequent attempts to save subsequent sessions have failed. I have attempted charnging Save interval to 0, +0, 10, but on shutdown/reboot when i log in again any changes made in the recent session are not saved.
Save to file:
I also checked save to file. After booting in following creating an ext4 save file, when I close down again I get first shut down dialog again so can only create a new save file with different suffix.
Manual frugal install to a Sandisk 32 GB Ultra Fit Flash Drive, using UEFI boot Manager, Fat32 EFI Partition and an ext4 partition fo all data. Manually loaded intel 7265 wifi firmware. All working nicely. Having issues with saves.
Save to Folder:
Intitial save to folder works, however subsequent attempts to save subsequent sessions have failed. I have attempted charnging Save interval to 0, +0, 10, but on shutdown/reboot when i log in again any changes made in the recent session are not saved.
Save to file:
I also checked save to file. After booting in following creating an ext4 save file, when I close down again I get first shut down dialog again so can only create a new save file with different suffix.
I'm having similar problems to Terry H except I have made a frugal install to my internal SSD drive. It created a savefile but never loaded it at bootup.
I'm not familiar with SliTaz so I'm not sure what stanza to use.
It boots with the following:
I still haven't sorted the dual monitor problem. The current system only sees one of my two monitors. Does SilTaz have the nvidia propriety driver available?
Is there a devx available?
I'm not familiar with SliTaz so I'm not sure what stanza to use.
It boots with the following:
Code: Select all
title TazPup A3
root (hd0,0)
kernel /tazpupa3/vmlinuz pmedia=atahd psubdir=tazpupa3
initrd /tazpupa3/initrd.xz
Is there a devx available?
@Terry triggering save session on slitaz shutdown was extremely painful in my head. Because when slitaz close X server it just restarts X. So the save session script must run while X is running then trigger slitaz shutdown.
@Smokey can you please send me the bootinit.log file which can be found at /initrd/tmp ? I will try to add debug mode on rc.shutdown script to trace the save session process. You may search nvidia driver property at http://packages.slitaz.org . I think devx sfs from slacko might work.
@Smokey can you please send me the bootinit.log file which can be found at /initrd/tmp ? I will try to add debug mode on rc.shutdown script to trace the save session process. You may search nvidia driver property at http://packages.slitaz.org . I think devx sfs from slacko might work.
Take your time with this mistfire. This is a new idea/project and there are lots of technical issues involved that are best worked on slowly and accurately. Goodness, its only been a few days so not the time to worry about devx yet! Truly bound to take time to get persistence/save file/folder issues worked out and an important piece of development so best to not rush it. Better to wait a few weeks and release something solid so users won't expect a perfect Pup at such an early stage. I haven't even tried it yet - I usually wait until it is clear to me the developer feels it is 'ready' for productive testing (unless I'm helping out with the main development, which I'm not in this case).
Of course, especially when it comes to the savefile issues, early test reports are certainly good and helpful in determining what is going on.
wiak
Of course, especially when it comes to the savefile issues, early test reports are certainly good and helpful in determining what is going on.
wiak
Testing Tazpup 3 alpha - loving it so far. Exciting stuff.
Keep it up mistfire please!
PS: I do not want persistence. I want a pristine boot each time - uncontaminated by previous session. If possible I do want to customise with personal sfs or similar.
I save what I want externally so no persistence required.
I want quick and stable.
cheers and good luck!
Keep it up mistfire please!
PS: I do not want persistence. I want a pristine boot each time - uncontaminated by previous session. If possible I do want to customise with personal sfs or similar.
I save what I want externally so no persistence required.
I want quick and stable.
cheers and good luck!
Tazpup alpha 4 is now released:
* More improvements on shutdown and save session
* Remaster script might work
* pup_event frontend now running (house cleaning task might work)
* Shutdown and reboot works on user account without root asking password
* Device startup from puppy is now added
* With zram
* With tazpkg installer script
Download: https://drive.google.com/file/d/1-wxFwE ... sp=sharing
Build kit is now available if you want to build your own tazpup
https://drive.google.com/file/d/16YgSwp ... sp=sharing
Just run the script in terminal, specify the pristine slitaz iso image and puppy iso image, and wait until the process is finished. This tool only works on puppy host
* More improvements on shutdown and save session
* Remaster script might work
* pup_event frontend now running (house cleaning task might work)
* Shutdown and reboot works on user account without root asking password
* Device startup from puppy is now added
* With zram
* With tazpkg installer script
Download: https://drive.google.com/file/d/1-wxFwE ... sp=sharing
Build kit is now available if you want to build your own tazpup
https://drive.google.com/file/d/16YgSwp ... sp=sharing
Just run the script in terminal, specify the pristine slitaz iso image and puppy iso image, and wait until the process is finished. This tool only works on puppy host
See bootinit.log file attached.@Smokey can you please send me the bootinit.log file which can be found at /initrd/tmp ? I will try to add debug mode on rc.shutdown script to trace the save session process. You may search nvidia driver property at http://packages.slitaz.org . I think devx sfs from slacko might work.
There are two nvidia packages in the repo but they are for legacy cards. My card is a GT 740 which is not supported this is why I need to compile my own.
Which slacko version devx do you suggest? There are many.
- Attachments
-
- bootinit.log.gz
- (1.22 KiB) Downloaded 443 times