(old)Puppy Linux Discussion Forum

Uploading now. I forgot to change default wm as jwm so next version seems to boot into e17.
I had forgotten couple of left over icons to Pinboard in the jwm. Remove them. They are obsolete. I dont know from what cache they are from. Need to chase them down.
I have also changed synclient to use wheezy one. It has better movement support for my touchpad. Might help others. For me touchpad movement slider didnt work over 1.0. Now it works as it should, even to the 10. Dont test. I tried it and had difficulties to get it back.

Download link for the Dpup Squeeze 5.0.0.3.
http://www.smokey01.com/pemasu/DpupSque ... ze_5.0.0.3

Before anyone asks. Wm swither in e17 is found under desktop in the Applications menu.

Now I should get familiar with e17 also. Luckily here is whole thread about it. And a lot info and link to the e17 guide in that thread.

James C. When and if you read this. Could you test if 5003 boot to the 256 RAM. I remember that you had thatkind machine also. From Jurassic. Lol.

frugal manual hdd install to ext3. broadom built in wl.ko connects via Frisbee flawlessly as usual. background wallpaper changer didn't work error about pinboard not chosen.

not used e17 so will take some time poking around to do the usual checks.

pemasu did you keep advancecomp and optipng in the devx.sfs? looking good!


------

wm switcher working here and in jwm background changer works.
------
renamed savefile on this install starting with fresh save and pfix=ram.

Took the upgrade route here on ancient 466 celeron "mendocino" with 256mbytes ram. It went smooth and works snappy . Still in openbox i added. Will check e17 later. Looking good..

pemasu wrote:James C. When and if you read this. Could you test if 5003 boot to the 256 RAM. I remember that you had thatkind machine also. From Jurassic. Lol.

Burning a cd right now.

There are still a lot of those old boxes being used around the world.No need in getting rid of something that still works.

James C wrote:

pemasu wrote:James C. When and if you read this. Could you test if 5003 boot to the 256 RAM. I remember that you had thatkind machine also. From Jurassic. Lol.

Burning a cd right now.

There are still a lot of those old boxes being used around the world.No need in getting rid of something that still works.

And the answer is yes, 5003 is running live pfix=ram on a 256 mb ram box with the cd unmounted and ejected.

# free
total used free shared buffers
Mem: 253252 247932 5320 0 21092
Swap: 1020092 69732 950360
Total: 1273344 317664 955680
#

I did a manual frugal install of 003.I installed the devx + kernel
source + ati-driver-installer-11-7-x86.x86_64.run.

Tue 2 Aug 2011 Operating System: Puppy Squeeze-5.0.0.3 Linux 2.6.39
5.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility
Radeon HD 4200]
oem: ATI ATOMBIOS product: RS880M 01.00

X Server: Xorg Driver: (II) glx: vendor=FireGL - ATI Technologies Inc.
(II) Module fglrx: vendor=FireGL - ATI Technologies Inc. (II) Module
fglrxdrm: vendor=FireGL - ATI Technologies Inc.
X.Org version: 1.7.7
dimensions: 1024x600 pixels (270x158 millimeters)
depth of root window: 24 planes
AMD Athlon(tm) II Neo K125 Processor
Core 0: 1695 MHz

It is working pretty well after installing the ati driver.

Manual frugal installation of 5.0.0.3 on an ext4 partition. It's working great and I've installed the following applications which all appear to be working fine:

Bibletime_lucid-2.7.2a.sfs
devx_squeeze_5.0.0.3.sfs
jre-1.6u25-i586.sfs
kernel_src-2.6.39-3-patched-lupe28.sfs
LibreOffice-3.4.1_en-US-fixed.sfs
Firefox-6.0 beta Firefox web browser
thunderbird-5.0 Thunderbird Email Client
wine-1.3.25-i486_v2 Wine Windows Program Loader
Acrobat_Reader-9.3.3-Lucid Adobe Acrobat Reader PDF application
BibleAnalysis-4.1.0 Bible study
eSword-9 e-Sword
theWord-3.2.1 theWord
LHP_sys_info-0.5 Lighthouse System Information & Video Report
binutils_2.20.1-16 The GNU assembler, linker and binary utilities
cpp-4.1_4.1.2-29 The GNU C preprocessor
gcc-4.1-base_4.1.2-29 The GNU Compiler Collection (base package)
gcc-4.1_4.1.2-29 The GNU C compiler

Unfortunately, still getting an error message re finding 'ldconfig' when trying to install NVIDIA-Linux-x86-280.13.run. I placed a link to ldconfig in /usr/bin, got error re finding 'ld' which was corrected by installing binutils. Next error re finding 'cc'. Installed gcc but that didn't correct the message so I gave up chasing it.

In any event, it looks fast and solid and your E17 implementation works well. I've mainly just changed some icons and added launchers. Iguleder will have many bugs solved thanks to your efforts.

Cheers,
Jim

Quick manual frugal install of 5.0.0.3 on my main Linux box. Everything looking good so far.


VIDEO REPORT: Puppy Squeeze, version 5.0.0.3

Chip description:
oem: NVidia
product: NV18 () Board Chip Rev A2

Driver used by Xorg:
nv

Video mode used by Xorg:
Resolution: Depth 24 Depth: "Display"

...the above also recorded in /tmp/report-video


-Computer-
Processor : AMD Athlon(tm) XP 2400+
Memory : 1033MB (169MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Tue 02 Aug 2011 08:01:48 PM CDT
-Display-
Resolution : 1440x900 pixels
OpenGL Renderer : Unknown
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : VIA8233 - VIA 8235


# free
total used free shared buffers
Mem: 1033900 386436 647464 0 50764
Swap: 1228936 0 1228936
Total: 2262836 386436 1876400

Just got 5.0.0.3 - very impressive

runs very well on my old Acer 243LC laptop with 256mb ram.

Time to sleep now - but tomorrow, have to try this on the new E732 laptop.

Many thanks again pemasu - Super Puppy Maker.

Very best regards - Ray

Did a manual frugal install of 5.0.0.3 on the old P3 test box.No problems.


VIDEO REPORT: Puppy Squeeze, version 5.0.0.3

Chip description:
Intel Corporation 82810E DC-133 (GMCH) Graphics Memory Controller Hub
Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller

Driver used by Xorg:
intel

Video mode used by Xorg:
Resolution: Depth 24 Depth: "Display"

...the above also recorded in /tmp/report-video


-Computer-
Processor : Pentium III (Coppermine)
Memory : 253MB (127MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Tue 02 Aug 2011 10:19:17 PM CDT
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Unknown
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : ICH - Intel 82801AA-ICH

-Version-
Kernel : Linux 2.6.39 (i686)
Compiled : #1 SMP Fri Jul 15 19:38:53 GMT-8 2011
C Library : GNU C Library version 2.11.2 (stable)
Default C Compiler : Unknown
Distribution : Unknown distribution
-Current Session-
Computer Name : puppypc
User Name : root (root)
Home Directory : /root
Desktop Environment : Unknown (Window Manager: Enlightenment)

# free
total used free shared buffers
Mem: 253252 242188 11064 0 27432
Swap: 1020092 0 1020092
Total: 1273344 242188 1031156

Guys, a small request - core bugs that are in the base (that have nothing to do with applications, things like malfunctioning X, CUPS, E17, bugs, etc') - report them in the Puppy Squeeze thread, so we can hunt them down more easily.

It's hard for me and pemasu to follow two threads in parallel

Thank you!

03, sound and wifi now working

Unable to add printer CUPS password required.

Dave S. I forgot to change /etc/cups/cupsd.conf or was it cups.conf.
Copy one from any Lucid Puppy and it works. I need to add that configuration file to the zdpup_utilities pet. I have done that fix manually so far and now I forgot to add it.

Well. I will reupload bug fixed version 5003 today later.
Good pick but easily solved. I will fix that obsolete Pinboard icons same time.

Iguleder. I will post my changes to the core functions in your thread when I get feedback that they have fixed the problems.

Now...I need feedback if the PUI (Puppy Universal Installer) works correctly. Does it recognize ntfs, ext2, ext3 and ext4 ok. And can you do Puppy installation to ext4, for example in the usb stick. That is the most tricky part.

Dave S. My hunch was correct. Separate z...sfs is not good thing. It might speed boot time and lessens the RAM usage but...not all network kernel module drivers and firmware will be loaded automatically. I have suspected it before but now I know.
Dave S. If you run dmesg right after boot, can you check is there firmware loading for your wireless. I would like to record that problem for further knowledge.
From this experience, I wont release for generic usage separated sfs anymore.
Something to think about in Spup also.

pui recognized ext4 partitions on usb and hdd but unable to recognize squeez sfs file for install. odd symlink errors on desktop. see pic. burn 5003 to dvd then ran pui for usb frugal install ext4, created savefile then reboot.

Faithful Frisbee was unable to complete the wifi connection in the presence of acquired network. see attached. upon rebooting did not recognize previously created savefile and prompted me to create another at which point gave up.

Jim3630. Obsolete icon remnants have been explained when I made 5003 announcement. I am reluctant to repeat my posts.

PUI seems to need still more investigation. I will test it also.

Normally I dont use it at all. But if it is in Puplet, it should also work.

Anyway, I will reupload 5003 without those icon remnants and with working cups.conf
And if there is some other bug fix to attain, I will include it also. But no version change if there does not come any real changes.

The following dialog appears with each launch of Fotoxx.