Page 6 of 9
SMplayer 18.1.0 / SMtube 18.1.0
Posted: Sat 13 Jan 2018, 00:59
by norgo
compiled under use of Slacko 630 and shared qt-4.8.6 libs.
smtube-18.1.0-i686.pet
smplayer-18.1.0-i686.pet
Important information ( Slacko 630 )
to be able to play youtube videos under usage of MPlayer you have to update your MPlayer.
MPlayer version becomes checked by SMtube and default MPlayer version 1.1 won't work.
Version 1.2 and 1.3 are working without problems.
tested version 1.2 ( installed via PPM )
tested
version 1.3 ( PET build by Sailor Enceladus )
I also tested SMtube-18.1.0 and VLC under Tahrpup 6.0.5
works without problems.
Dependencies:
-qt4
-libqtwebkit
-gstreamer
-gst-plugins-base
Posted: Sun 14 Jan 2018, 09:36
by backi
Hi norgo !
Mercy beaucoup once more
Posted: Sun 18 Feb 2018, 11:31
by takenp
Could you upload the Mplayer_1.3 to somewhere else plz ? )
Posted: Sun 18 Feb 2018, 11:48
by norgo
takenp wrote:Could you upload the Mplayer_1.3 to somewhere else plz ? )
redirected to @Sailor Enceladus
Posted: Mon 19 Feb 2018, 13:40
by festus
takenp wrote:Could you upload the Mplayer_1.3 to somewhere else plz ? )
Here is the same player requested, "MPlayer-1.3.0-20160608 slk600.pet"
5.18 MB
MD5: 1773e519a17694ba96f244b8ee6a5c69
https://www.datafilehost.com/d/9dd2fa7f
Hope this helps you.
bliss,
festus
Posted: Mon 19 Feb 2018, 15:04
by backi
Many thanks Festus !
Posted: Mon 19 Feb 2018, 15:06
by takenp
festus wrote: Hope this helps you.
thx alot!
SMplayer 18.2.2 - statically
Posted: Wed 21 Feb 2018, 18:19
by norgo
SMplayer version 18.2.2 - statically
compiled under use of Slacko 632 / Slacko64 632 and statically qt-4.8.6
smplayer-18.2.2-s-i686.pet
smplayer-18.2.2-s-x86_64.pet
SMplayer 18.3.0
Posted: Sat 24 Mar 2018, 10:40
by norgo
SMplayer version 18.3.0
compiled under use of Slacko 700 RC3 / Slacko64 700 RC3 and shared qt-5.6.1 libs.
smplayer-18.3.0-qt5-i686.pet
smplayer-18.3.0-qt5-x86_64.pet
compiled under use of Slacko 630 and shared qt-4.8.6 libs.
smplayer-18.3.0-i686.pet
Posted: Thu 29 Mar 2018, 07:14
by backi
Hi Norgo !
Fantastique
Posted: Sat 31 Mar 2018, 19:47
by Mike Walsh
Hallo, norgo.
A question, if I may? What would be the newest version of SMTube that would work in Slacko 570?
Also, what's the reason for the "Error; Cannot connect to the server" readout at start-up? I'm currently using version 14.9.0, compiled a few years ago by scabz...
Mike.
Posted: Sat 31 Mar 2018, 21:34
by norgo
Independent of version of operating system you will need the latest version of SMtube ( currently 18.1.0 ).
From time to time youtube code is changing and only the latest version of SMtube will be able to play these videos from youtube sources.
Additional you will need at least version 18.1.0 of SMplayer ( 18.3.0 is the most recent version ).
Mplayer version becomes also checked but I can't tell you the exactly revision number of MPlayer out of my head, I'm currently not at home.
This means you will need to update SMtube, SMplayer and Mplayer.
SMtube 18.3.0
Posted: Sat 07 Apr 2018, 23:38
by norgo
SMtube version 18.3.0
compiled under Slacko 700 RC3 / Slacko64 700 RC3 and shared qt 5.6.1 libs
smtube-18.3.0-qt5-i686.pet
smtube-18.3.0-qt5-x86_64.pet
compiled under Slacko 630 and shared qt 4.8.6 libs
smtube-18.3.0-i686.pet
Posted: Sun 08 Apr 2018, 19:15
by norgo
Mike Walsh wrote:... What would be the newest version of SMTube that would work in Slacko 570?
@Mike Walsh
Hello Mike,
install
smplayer-18.3.0-i686.pet and
smtube-18.3.0-i686.pet ( shared qt-4 version ) at your slacko 570 installation.
replace the outdated Mplayer 1.1 version by ... by what ??? Nothing available
You can take this
Mplayer version 1.3.0 I compiled for your slacko 570 today ( not extensively tested yet, this is your part
)
don't forget to install following needed dependencies:
qt-4
libqtwebkit
ca-certificates
gstreamer
gst-plugins-base
SMtube links to precise are now dead..
Posted: Tue 10 Apr 2018, 05:25
by hamoudoudou
SMplayer to be updated on XFCE Chloe, SMtube links to precise are now dead..
Posted: Tue 10 Apr 2018, 17:45
by Mike Walsh
Hallo, Norgo.
Sorry for the late reply; I've only just found this!
Been busy since the week-end.....
Gosh, you didn't need to go to all that effort with MPlayer....but it's very much appreciated, nonetheless. I've downloaded the relevant .pets into their own folder, and time permitting, will see how it all goes. I'll let you know what happens, of course.
-------------------------------------------------------
Questions:- Which particular version of 'ca-certificates' are we talking about here? EDIT:- Never mind; I've installed
ca-certs-20161130 from the PPM. Is it 'new' enough?
)
A 'stripped'
Qt-4.8.5 is permanently loaded in my 570, so libQtwebkit's already there. Will 4.8.5 do?
As for gstreamer;
gstreamer-0.10.36 &
gst-plugins-base-0.10.36 are currently installed. Are these sufficient, or do I need the
gst-plugins-good-0.10.31 as well?
Sorry for all the questions, but I like to clear this sort of thing up as early as possible! Oh, two more points, while I think of them. Will this MPlayer install over the top of the existing one, or will I need to uninstall the old one first?
(Current version's
1.0.8b; probably the one that came with Slacko, if the truth be known.....)
And I guess the existing SMPlayer and SMTube need removing first, too?
Mike.
Posted: Tue 10 Apr 2018, 19:25
by norgo
Hi Mike,
you are welcome.
To overwrite and older version by a newer one is a bad style and not to recommend.
It's possible yes, but to uninstall the old and to install the new version is the better way.
your question about dependencies:
ca-certificates_20161130
okay
Qt-4.8.5 + libQtWebkit
okay
gstreamer-0.10.36 / gst-plugins-base-0.10.36
okay ( no other is needed )
In other words, perfect conditions if mplayer is working too
I don't know the age of your computer, the used CPU and GPU.
If an Nvidia GPU is used and capable for hardware decoding, give me a sign.
In this case I would recommend to use mplayer with enabled vdpau support.
Alternatively you could use mpv, there should be vdpau and vaapi support already included.
This reduced CPU usage drastically. (only a hint )
Posted: Tue 10 Apr 2018, 20:17
by Mike Walsh
Hi, Norgo.
Norgo wrote:I don't know the age of your computer, the used CPU and GPU.
Soon remedied, mate.
13 years old.
Dual-core Athlon64 X2 3800+.
ATI Radeon Xpress 200 graphics chip, built-in to the SB400 southbridge. In other words, fairly basic, but it gets the job done.....and after all these years, it's still a lovely sharp picture.
I'm curious. MPlayer 1.0.8b (the built-in original) is an executable. Yet this 1.3.0 seems to be a shared library (a là Chromium), not an executable at all. How the hell does it run?
------------------------------
I'll report back when I've tried SMTube, and let ya know what happens.
Stay tuned.....
Mike.
Posted: Tue 10 Apr 2018, 21:08
by Mike Walsh
Hi again, Norgo.
Well, SMTube starts and runs fine.....but when you want to play something, SMPlayer starts up.....then MPlayer crashes.
Here's the log read-out:-
Code: Select all
/usr/bin/mplayer -noquiet -slave -identify -nofs -sub-fuzziness 1 -vo xv, -ao alsa, -nodr -double -stop-xscreensaver -nomouseinput -input nodefault-bindings:conf=/dev/null -nokeepaspect -wid 67108900 -monitorpixelaspect 1 -osdlevel 0 -subfont-osd-scale 3 -progbar-align 80 -ass -embeddedfonts -ass-line-spacing 0 -ass-font-scale 1 -noflip-hebrew -ass-styles /root/.config/smplayer/styles.ass -subcp ISO-8859-1 -subpos 100 -volume 44 -prefer-ipv4 -vf-add screenshot=/tmp/smplayer_screenshots/shot -noslices -af-add scaletempo -softvol -softvol-max 110 https://r7---sn-u5a3u5a3-auol.googlevideo.com/videoplayback?quality=hd720&expire=1523416016&dur=1385.186&mn=sn-u5a3u5a3-auol,sn-aigl6ner&mm=31,29&ipbits=0&id=o-AGHDSwJbMro5ur-tffPKo4QUec266i8D1NTP-3pxh6TN&sparams=dur,ei,id,initcwndbps,ip,ipbits,itag,lmt,mime,mm,mn,ms,mv,pl,ratebypass,requiressl,source,expire&mv=m&mt=1523394287&ms=au,rdu&ip=88.109.171.254&lmt=1522880072649585&signature=BBABB5DA8282DFABBEAD8D3712AA986A66D430B1.52B93D6DBC3359C1BA488D8832A6271435F05020&ratebypass=yes&itag=22&ei=cCfNWqnTLI_JVdWjvJgN&fvip=5&pl=19&source=youtube&key=yt6&mime=video/mp4&requiressl=yes&initcwndbps=727500&c=WEB
MPlayer 1.3.0-4.7.1 (C) 2000-2016 MPlayer Team
Playing https://r7---sn-u5a3u5a3-auol.googlevideo.com/videoplayback?quality=hd720&expire=1523416016&dur=1385.186&mn=sn-u5a3u5a3-auol,sn-aigl6ner&mm=31,29&ipbits=0&id=o-AGHDSwJbMro5ur-tffPKo4QUec266i8D1NTP-3pxh6TN&sparams=dur,ei,id,initcwndbps,ip,ipbits,itag,lmt,mime,mm,mn,ms,mv,pl,ratebypass,requiressl,source,expire&mv=m&mt=1523394287&ms=au,rdu&ip=88.109.171.254&lmt=1522880072649585&signature=BBABB5DA8282DFABBEAD8D3712AA986A66D430B1.52B93D6DBC3359C1BA488D8832A6271435F05020&ratebypass=yes&itag=22&ei=cCfNWqnTLI_JVdWjvJgN&fvip=5&pl=19&source=youtube&key=yt6&mime=video/mp4&requiressl=yes&initcwndbps=727500&c=WEB.
libavformat version 57.25.100 (internal)
libavformat file format detected.
[mov,mp4,m4a,3gp,3g2,mj2 @ 0xb7586440]Protocol name not provided, cannot determine if input is local or a network protocol, buffers and access patterns cannot be configured optimally without knowing the protocol
ID_VIDEO_ID=0
[lavf] stream 0: video (h264), -vid 0
ID_AUDIO_ID=0
ID_AID_0_LANG=eng
[lavf] stream 1: audio (aac), -aid 0, -alang eng
VIDEO: [H264] 1280x720 24bpp 25.000 fps 1053.3 kbps (128.6 kbyte/s)
Opening video filter: [ass auto=1]
[ass] auto-open
Opening video filter: [screenshot=/tmp/smplayer_screenshots/shot]
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
libavcodec version 57.24.102 (internal)
Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264)
==========================================================================
ID_VIDEO_CODEC=ffh264
Clip info:
major_brand: mp42
ID_CLIP_INFO_NAME0=major_brand
ID_CLIP_INFO_VALUE0=mp42
minor_version: 0
ID_CLIP_INFO_NAME1=minor_version
ID_CLIP_INFO_VALUE1=0
compatible_brands: isommp42
ID_CLIP_INFO_NAME2=compatible_brands
ID_CLIP_INFO_VALUE2=isommp42
creation_time: 2018-04-04 22:13:24
ID_CLIP_INFO_NAME3=creation_time
ID_CLIP_INFO_VALUE3=2018-04-04 22:13:24
ID_CLIP_INFO_N=4
ID_FILENAME=https://r7---sn-u5a3u5a3-auol.googlevideo.com/videoplayback?quality=hd720&expire=1523416016&dur=1385.186&mn=sn-u5a3u5a3-auol,sn-aigl6ner&mm=31,29&ipbits=0&id=o-AGHDSwJbMro5ur-tffPKo4QUec266i8D1NTP-3pxh6TN&sparams=dur,ei,id,initcwndbps,ip,ipbits,itag,lmt,mime,mm,mn,ms,mv,pl,ratebypass,requiressl,source,expire&mv=m&mt=1523394287&ms=au,rdu&ip=88.109.171.254&lmt=1522880072649585&signature=BBABB5DA8282DFABBEAD8D3712AA986A66D430B1.52B93D6DBC3359C1BA488D8832A6271435F05020&ratebypass=yes&itag=22&ei=cCfNWqnTLI_JVdWjvJgN&fvip=5&pl=19&source=youtube&key=yt6&mime=video/mp4&requiressl=yes&initcwndbps=727500&c=WEB
ID_DEMUXER=lavfpref
ID_VIDEO_FORMAT=H264
ID_VIDEO_BITRATE=1053320
ID_VIDEO_WIDTH=1280
ID_VIDEO_HEIGHT=720
ID_VIDEO_FPS=25.000
ID_VIDEO_ASPECT=0.0000
ID_AUDIO_FORMAT=MP4A
ID_AUDIO_BITRATE=125584
ID_AUDIO_RATE=44100
ID_AUDIO_NCH=2
ID_START_TIME=0.00
ID_LENGTH=1385.14
ID_SEEKABLE=1
ID_CHAPTERS=0
==========================================================================
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
AUDIO: 44100 Hz, 2 ch, floatle, 125.6 kbit/4.45% (ratio: 15698->352800)
ID_AUDIO_BITRATE=125584
ID_AUDIO_RATE=44100
ID_AUDIO_NCH=2
Selected audio codec: [ffaac] afm: ffmpeg (FFmpeg AAC (MPEG-2/MPEG-4 Audio))
==========================================================================
AO: [alsa] 48000Hz 2ch floatle (4 bytes per sample)
ID_AUDIO_CODEC=ffaac
[Mixer] No hardware mixing, inserting volume filter.
Starting playback...
MPlayer interrupted by signal 11 in module: decode_audio
ID_SIGNAL=11
- MPlayer crashed by bad usage of CPU/FPU/RAM.
Recompile MPlayer with --enable-debug and make a 'gdb' backtrace and
disassembly. Details in DOCS/HTML/en/bugreports_what.html#bugreports_crash.
- MPlayer crashed. This shouldn't happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
gcc version. If you think it's MPlayer's fault, please read
DOCS/HTML/en/bugreports.html and follow the instructions there. We can't and
won't help unless you provide this information when reporting a possible bug.
And this is always with an 'Exit code 1'. (Sorry for the width of this; I copied it from the log as it showed up in SMPlayer, and this is just how it turned out..!)
Mike.
Posted: Tue 10 Apr 2018, 23:21
by norgo
Hello Mike,
please start SMplayer and select under
Preferences->Video Output Driver: x11 (slow)
Preferences->Audio Output Driver: null
close and restart SMplayer
If Mplayer is playing now ( of course without sound )
select Preferences->Audio Output Driver: alsa
what's now ?