(old)Puppy Linux Discussion Forum

Woohoo! Downloading now...

Ok,

At this time I am in Slaxer_pup with JWM-456 (compiled for Slaxer_pup) installed. No issues with older Gxine. . Fullscreen default . (Slaxer_pup is entirely 4.1.2, only the kernel is changed to 2.6.27.7)

Cheers

1. Puppy 4.2.1-rc3
Booted live CD with pfix=ram.
Installed mplayer.
Installed Pstreamvid.
Refresh menus.
Ran Pstreamvid; no change to version loaded using Puppy 4.2.1-rc3 on Flash Drive.

Seamonkey takes 26 sec to load [due to optical disk being used?]
Pstreamvid loads in about 2 sec.
BBC = 4 sec.
Fox11 = 4 sec
France24 = 3 sec.
NASA = 4 sec.
SkyNews = 2 sec.

2. My hardware:
Compaq Deskpro EN made 1999
797 MHz Coppermine CPU, 256 MB RAM.

3. Will try v1.2 ASAP.

01micko wrote:Ok,

At this time I am in Slaxer_pup with JWM-456 (compiled for Slaxer_pup) installed. No issues with older Gxine. . Fullscreen default . (Slaxer_pup is entirely 4.1.2, only the kernel is changed to 2.6.27.7)

Cheers

Yeah, it's a problem with he new gXine, but nobody handles it..

Anyway, all good with Pstreamvid 1.3 itself? Great!

2 small niggles.

pet.specs is being left in /

When 'installed pet' menu appears, there is the usual installed to many menu entries. I found this to be a problem caused by - instead of _ in the pet name.

Did you see Barrys message in his blog to you?

BoxPup 4.1.3
Pstreamvid:
Uninstalled v1.2-8->rebooted.
Installed v1.3->rebooted.
Run Pstreamvid: <1sec to load; <1sec to close.
Love the new tabs and how quick/responsive v1.3 is.
Gxine doesn't work in BoxPup [because Gxine isn't installed I guess ]

Mplayer in use:
Time between "Play" and video window appearing:
2sec = France24; SkyNews.
3sec = NASA; BBC.
5sec = Fox11.
9sec = NBC.

Firefox:
10sec = To get to the Firefox "restore" button.
7sec = From the restore button to Firefox windows opening.

Sylvander wrote:BoxPup 4.1.3
Pstreamvid:
Uninstalled v1.2-8->rebooted.
Installed v1.3->rebooted.
Run Pstreamvid: <1sec to load; <1sec to close.
Love the new tabs and how quick/responsive v1.3 is.
Gxine doesn't work in BoxPup [because Gxine isn't installed I guess ]

Mplayer in use:
Time between "Play" and video window appearing:
2sec = France24; SkyNews.
3sec = NASA; BBC.
5sec = Fox11.
9sec = NBC.

Firefox:
10sec = To get to the Firefox "restore" button.
7sec = From the restore button to Firefox windows opening.

GREAT! THANXX

tasmod wrote:2 small niggles.

pet.specs is being left in /

When 'installed pet' menu appears, there is the usual installed to many menu entries. I found this to be a problem caused by - instead of _ in the pet name.

Did you see Barrys message in his blog to you?

thanks rob, but it did not happen to me? And I already followed Barry's instruction

OUTSTANDING TRIO!!

Every thing I complained about has disappeared with v. 1.3.

On some channels the load and unload speed is faster than I've
ever seen before.

I'm very happy.

Great Job!

rjb

Rjbrewer, sylvander, micko, tasmod, et all

Thanks, now it's time to move on. Pstreamvid 1.3 is polished and stable, it will be in 4.3 beta1. Let's hope somebody fixes gxine -f option.
I'm on to next project. That is to make sfsinstaller gui that I made for current 4 series, adheres to 4.3 new petget and structure. So installed sfs can be uninstalled in 4.3

My name aint URL:

I thought pstreamvid wouldn;t do http streams. I was wrong.
I was trying to load the url direct from streamsniffer into
pstream, instead of copying to a text editor first.
Not only does it play http, it plays them in both gxine and
mplayer.

Here's a few streams to try.

http://ia331425.us.archive.org/2/items/ ... p4?start=0

A great animated film by Nina Paley. Based on the Sanskrit poem
"Ramayama of Valmiki" I think Lobster might dig this.

http://ia301505.us.archive.org/1/items/ ... p4?start=0

"Attack of the flesh eating bog monster from the center of the earth
and beyond the moon" A spoof of old scifi films.

These movies are from this site:

http://www.archive.org/index.php

Supposedly 190 thousand video pieces in the "moving images"
archive.
Or 150 billion pages of text, if your into reading.

have fun

Barry has decided to revert to fully functional gxine 0.5.9 (good call!), unfortunately I already designed pstreamvid 1.3 to prepare for 0.5.94. Anyway patch is provided in main post. Please install it. Thanks

15 Aug 2009 - reverting to gxine 0.5.9 (430 Beta1) - will replace /usr/local/pstreamvid/functions

A tip, if you want gXine to open 200% window when "Full Screen Mode is off" then you edit /root/.gxine/config to this:

# The main window's default size
# { 50% 75% 100% 150% 200% }, default: 0
gui.window_size:200%

url for the next James Cameron film "Avatar"--trailer.

http://content5.catalog.video.msn.com/e ... B_750k.flv

Works well with mplayer on my laptop; pc playback is jerky.

Works well for me; playback not jerky.

Works well for me using mplayer; playback not jerky.

There may be a valuable cross-purpose between this old thread and another older one:

.wvx stream recording
http://www.murga-linux.com/puppy/viewto ... 320#392320

Our son needs to be able to follow the .wvx pointer and play the associated video without having to downgrade to anything-MS. His laptop has Puppy 4.31 installed.

We don't need to record but do need to be able to view - right now I can paste URL into Pstreamvid 1.3 which then opens a gxine window but all we get is the audio. What are we doing wrong, please?

http://cafe.edgeboss.net/wmedia/cafe/d ... 01_s01.wvx

He needs this for an online college course that started today.

Edoc,

I think you need mplayer and use it in pstreamvid. I dunno if there's a way to make gxine plays more extensions.

Regards

Where is the best source for mplayer?

I have used it in the past, earlier in it's life when it was really buggy, but I know that it has come a long ways.

Hey Edoc;

I was able to get audio and video of that Liberty U. perversion
of psychology by using Ttuuxxxs' VLC 8.6 lite.
Have mms. streams enabled.