(old)Puppy Linux Discussion Forum

Posted: **Sat 24 Mar 2012, 10:41**

Any chance of a .pet of this now-working 2.6.8 AbiWord PlayDayz? One that would install over the existing AbiWord in both Lucid-528-004 and 3HD perchance? ( The latter would be an excellent bonus seeing that the wife uses the former whilst I the latter.

)

TIA!

Cheers/Amicalement,

Eyes-Only
"L'Peau-Rouge"

Posted: **Sat 24 Mar 2012, 13:15**

Any chance of a .pet of this now-working 2.6.8 AbiWord PlayDayz? One that would install over the existing AbiWord in both Lucid-528-004 and 3HD perchance?

You bet Eyes-Only. Later today I hope, at least for testing.
Here it is Abiword-2.8.6-Lucid-2 with working Help > http://diddywahdiddy.net/Puppy500/Abiwo ... ucid-2.pet
Please test the Help of course, plus handling docx files if possible, plus Gnumeric (because there is a new goffice which Gnumeric also uses). Also please test the default save format which is now "opendocument (odt)" which is the same as LibreOffice. This Abiword has been tested in Lucid and 3HD--it may work in other Puppies. Thanks.

mtPaint image editor appears twice in the Graphic category of the Puppy menu (Lucid Plus).

Yes radky. I think I might do a quick update of Lucid Plus, with that fixed and the new Abiword with Help, and anything else that turns up, in a few days.

I have abiword 2.9.1 in slacko 530 and it saves in abw , doc, or html... [help/updates/bug reporting doesn't work]

Aitch, I have let 01micko know that there is a way to get the help working and will send him the details--Abiword needs to be recompiled for it to take effect. Concerning the save format--what I am planning to do is to change the *default* save format from abw to probably odt or rtf--all of the others will continue to be available and it will be possible for the user to change the default format back to abw or to any of the others. odt is the opendocument format that LibreOffice uses. I think that using odt might "modernize" Abiword a bit.

Posted: **Sat 24 Mar 2012, 17:21**

I have recently received a new modem from my mobile internet provider, who have just upgraded their network to HSPA+. The details are:
Huawei HSPA+ Mobile USB Modem, Model No. E353s-6.
Vendor ID: 12d1
Product ID: 14fe, (all from lsusb)
Target Product ID: 1506
I tried to use it in Puppy-Linux Lupu 528.004, but it failed to connect and gave me the message:
# /usr/sbin/ppd : In the file /etc/ppp/peers/gprsmm: unrecognised option ' dev/ttyS0 ', (In the configuration window I had entered the detected device file:
"/dev/ttyUSB0/ dev/usb/ttyUSB0 /dev/ttyS0" )
The modem seemed to have switched, because lsusb showed the Product ID: 1506.
I unplugged/replugged the modem and tried to connect again, but got the same result.
From my superficial knowledge of this matter, I suspect that this modem is not registered in the modeswitch list, which might be the cause of this problem.
Consequently, I have been following the forum postings on this subject with great interest and have now tested this modem in Puppy-Linux Lupu-528-Testing01a,
but got exactly the same result.
I went to the modeswitch list file and found that 12d1 : 14fe is registered there, but NOT the Product Target ID 1506. (12d1 : 1505 is the nearest I could find).
So, I need some help at this point. Can someone please confirm that, to function, this modem needs to be registered in the modeswitch device list, or is
there some other problem that needs to be solved? If your response is "Yes" to registration, can I do it myself? If so, I am willing to try to accomplish it, but I
will need some instructions from an obliging expert, as I am not fluent in the editing of files.
To write this posting I am using this modem plugged into a Win7 box and it is functioning normally, which proves that my other configuration data is correct.
I will greatly appreciate any help that can be offered.

Posted: **Sat 24 Mar 2012, 17:28**

Yoliano, New hardware can be a problem for Lucid, since it is somewhat old. You might try Lucid Plus from page 91 top or Three-Headed Dog which has a newer kernel. Otherwise you could be better off with Slacko, which is newer.

Posted: **Sat 24 Mar 2012, 20:06**

playdayz wrote:Here it is Abiword-2.8.6-Lucid-2 with working Help > http://diddywahdiddy.net/Puppy500/Abiwo ... ucid-2.pet
Please test the Help of course, plus handling docx files if possible, plus Gnumeric (because there is a new goffice which Gnumeric also uses). Also please test the default save format which is now "opendocument (odt)" which is the same as LibreOffice.

Initial testing is OK with basic .odt and standard .doc files (I don’t use the Microsoft .docx format). Yes, all Help options are now accessible in the Abiword menu. Thank you playdayz, and thanks to the Abiword developers who provided the patch for Help resources.

Posted: **Sat 24 Mar 2012, 20:07**

Yoliano wrote:Huawei E353 Mobile USB-Modem Wireless Connection

Try this info and update package for your modem problems.
http://www.murga-linux.com/puppy/viewto ... 341#598341

Posted: **Sat 24 Mar 2012, 20:24**

playdayz wrote: Concerning the save format--what I am planning to do is to change the *default* save format from abw to probably odt or rtf--all of the others will continue to be available and it will be possible for the user to change the default format back to abw or to any of the others. odt is the opendocument format that LibreOffice uses. I think that using odt might "modernize" Abiword a bit.

For those who must use Microsoft Office, .odt won't work with it. Almost everybody can work in .rtf. Just a consideration....

Posted: **Sat 24 Mar 2012, 20:35**

For those who must use Microsoft Office, .odt won't work with it.

I just tested and Abiword opened a docx that had been created in Word and then saved it as odt. Then Word 2010 opened the odt and saved it as another odt and then reopened it. The document had a picture and a table so I think it was a decent test. I hope people will test this.

Here is the Native Language Support for the new Abiword 2.8.6 http://diddywahdiddy.net/Puppy500/Abiwo ... ucid-2.pet

By the way, Abiword 2.8.6 is still the official stable release of Abiword, plus the developmental release 2.9.2 won't compile in Lucid, which is why we have 2.8.6. There is a 2.9.0 that ttuuxxx built for Lucid in the PPM--it was not included in Lucid because at that time the Abiword developers said that 2.8.6 was better with docx documents.

Posted: **Sat 24 Mar 2012, 20:46**

PLEASE DELETE

Posted: **Sat 24 Mar 2012, 20:53**

cthisbear, For the broadcom, you might try mvoing the usb plugs around, that is plugging the usb devices into different ports, because that can alter the timing and I suspect that sometimes the timing is the problem. You can also try the new broadcom driver that peebee made http://www.murga-linux.com/puppy/viewto ... 686#611686

Posted: **Sat 24 Mar 2012, 20:59**

playdayz wrote: Here it is Abiword-2.8.6-Lucid-2 with working Help > http://diddywahdiddy.net/Puppy500/Abiwo ... ucid-2.pet
Please test the Help of course, plus handling docx files if possible, plus Gnumeric (because there is a new goffice which Gnumeric also uses). Also please test the default save format which is now "opendocument (odt)" which is the same as LibreOffice. This Abiword has been tested in Lucid and 3HD--it may work in other Puppies. Thanks.
.

New Abiword-2.8.6-Lucid-2 looks good with help installed.
Also, help now works in Gnumeric.

If user does not want to use the .odt extension, it is easily changed to different format in /usr/share/abiword/system.profile.

Thanks for enhancing these two programs

Posted: **Sat 24 Mar 2012, 21:09**

Abiword-2.8.6-Lucid-2 with working Help

Well it does not want to play nice with me.
Installed to Lucid 528-004 full install.
Help still shows nothing.
This install of Lucid is heavily tweaked and added to, so could be reason why not working.
I am going to try it on a clean, fresh install, of Lucid, and see what that does.
Tried it with a live CD, using option pfix=ram, with nothing but the install of Abiword-2.8.6-Lucid-2.
Selected help and Quickpet opened. I assume trying to tell me I needed a browser installed. Only browser I had at this time was Dillo.

Posted: **Sat 24 Mar 2012, 22:56**

Selected help and Quickpet opened. I assume trying to tell me I needed a browser installed

Yes. Exactly. I am very puzzled why it didn't work on the first install. You could open a terminal and enter env and see what DEFAULTBROWSER shows. Hmmm, it might not work if you have changed the default browser since booting. You could also start abiword in a terminal and see if you got any messages when you clicked Help.

New Abiword-2.8.6-Lucid-2 looks good with help installed.
Also, help now works in Gnumeric.

Help always worked in Gnumeric, I thought.

Posted: **Sun 25 Mar 2012, 00:23**

playdayz wrote:
Help always worked in Gnumeric, I thought.

My bad - You are correct. Help works in Gnumeric in all of your lucid - luci series.

In the future I will check, before I make a comment.

Posted: **Sun 25 Mar 2012, 00:25**

@Playdayz
I probably misdirected a question on PPM to your PM. Would you check?

Posted: **Sun 25 Mar 2012, 01:28**

Abiword-2.8.6-Lucid-2 with working Help

playdayz wrote:
Selected help and Quickpet opened. I assume trying to tell me I needed a browser installed
Yes. Exactly. I am very puzzled why it didn't work on the first install. You could open a terminal and enter env and see what DEFAULTBROWSER shows. Hmmm, it might not work if you have changed the default browser since booting. You could also start abiword in a terminal and see if you got any messages when you clicked Help.

Lucid 528-004, full install.
I have Firefox 11 lucid pet installed. The one you made.

env shows this:
DEFAULTBROWSER=/usr/lib/firefox/run-mozilla.sh

Abiword in a terminal gives this error message:
run-mozilla.sh: Cannot execute http://www.abisource.com/help/en-US/index.html.

Posted: **Sun 25 Mar 2012, 01:56**

Yoliano wrote:From my superficial knowledge of this matter, I suspect that this modem is not registered in the modeswitch list, which might be the cause of this problem.
Consequently, I have been following the forum postings on this subject with great interest and have now tested this modem in Puppy-Linux Lupu-528-Testing01a,
but got exactly the same result.
I went to the modeswitch list file and found that 12d1 : 14fe is registered there, but NOT the Product Target ID 1506. (12d1 : 1505 is the nearest I could find).
So, I need some help at this point. Can someone please confirm that, to function, this modem needs to be registered in the modeswitch device list, or is
there some other problem that needs to be solved?

Yoliano,
You are probably looking at the wrong list of modeswitch configurations. I suspect that the reference list is not kept up to date. The actual configurations are in /usr/share/usb_modeswitch. The file for 12d1:14fe contains this:

Code: Select all

# T-Mobile NL (Huawei E352)

TargetVendor=  0x12d1
TargetProduct= 0x1506

MessageContent="55534243123456780000000000000011062000000100000000000000000000"

which seems to match your modem. The best way for me to understand what you are encountering would be for you to boot up into TESTING01a or lupuplus-528, go as far as you can and then, in a console window, enter the command, pmodemdiag. That creates a similarly named tar.gz file in your home (/root) directory. Attach that to a posting or to a PM to me.
Richard

Posted: **Sun 25 Mar 2012, 01:59**

Lucid 528-004, full install.
I have Firefox 11 lucid pet installed. The one you made.

env shows this:
DEFAULTBROWSER=/usr/lib/firefox/run-mozilla.sh

Abiword in a terminal gives this error message:
run-mozilla.sh: Cannot execute http://www.abisource.com/help/en-US/index.html.

Oh, Oh.

New Firefox 11 pet to work with Abiword Help. Thanks Bigpup.
http://diddywahdiddy.net/Puppy500/Firef ... ucid-2.pet
Install and then reboot, then Abiword Help should work.

Posted: **Sun 25 Mar 2012, 02:23**

playdayz wrote:
For those who must use Microsoft Office, .odt won't work with it.
I just tested and Abiword opened a docx that had been created in Word and then saved it as odt. Then Word 2010 opened the odt and saved it as another odt and then reopened it. The document had a picture and a table so I think it was a decent test. I hope people will test this.

I stand corrected. And red-faced; looking back on it the version of Word I checked on was over a decade old! Sorry 'bout that.

Posted: **Sun 25 Mar 2012, 03:09**

playdayz wrote: New Firefox 11 pet to work with Abiword Help. Thanks Bigpup.
http://diddywahdiddy.net/Puppy500/Firef ... ucid-2.pet
Install and then reboot, then Abiword Help should work.

Installed "New Firefox 11 pet to work with Abiword Help".
Rebooted.
Abiword help now works using this Firefox 11.

You are back door hacking now!

Wonder what the next internal Firefox update will do?

(old)Puppy Linux Discussion Forum

Lucid Puppy 5.2.8 - Updated ISO Version 005 - APR 05 2012

Puppy-Linux-Lupu-528-Testing01a - Internet Connection

Re: Puppy-Linux-Lupu-528-Testing01a - Internet Connection