Page 1 of 7

Posted: Wed 07 Oct 2009, 05:34
by sunburnt
I made a SFS file out of it and it works great!
If you want to you can post it...

Posted: Wed 07 Oct 2009, 08:07
by Iguleder
You should post it in the software forum, that's great.

Posted: Wed 07 Oct 2009, 16:39
by sunburnt
Iguleder; One thing sweet is this setup can be used by many different Puppy installs!!!

Also... I assume that the file: skype.conf is written to by setup and configuration?
So to use it for: "mount but don`t union" the file needs to be copied somewhere.

Re: Installing Skype on Puppy

Posted: Sat 10 Oct 2009, 17:02
by brin
don largo wrote:Nice guide Iguleder!

One suggestion, however. Skype needs the files to be unpacked to the following directory: /usr/share/skype/
.
Thanks to this last little detail, NOW I have my skype in native lang. :D

Also THX to Iguleder!

works perfect!

brin

Posted: Wed 14 Oct 2009, 12:24
by hakar
I can not work !!! , Skype 2.0.0.72 - message "problem with audio capture", Puppy 4.2
help me :?

Posted: Fri 16 Oct 2009, 01:50
by jackieflorida
Since I use Puppy in setting up older computers, I am wondering what would be the minimum processor speed for voice only and also for video calls when using Skype in Puppy 4.X.

The Skype site states 1ghz as an overall specification but I figure that some forum readers may have experienced results at lower processor speeds.

Posted: Fri 16 Oct 2009, 10:47
by Iguleder
Plug in your microphone and make sure to select it in the options to make it work.

Posted: Tue 20 Oct 2009, 06:57
by hakar
Microphone connected. mhWaveEdit Audio recordre / editor recording and playback. :D Streamtuner ok. My machine is a Pentium II 350 MHz, owerclock to 392 MHz, SB 16 ISA card, Alsamixer, the message does not change "the problem with the Audio Capture" :cry: Puppy 4.2

Posted: Sat 24 Oct 2009, 08:08
by Iguleder
Try every option in the audio capture thingy (device 0, 1, 2 ... ) until you get it to work, that's what I did, since I didn't know where's 0 (red, green plug?).

Video working with Skype

Posted: Wed 28 Oct 2009, 10:49
by Paddy
Thanks for this guide, it was a great help. Everything worked as you said.

I bough a Microsoft LifeCam VX-700 very cheap on clearance sale. Plugged it in and it works really great with Skype on Puppy. To my amazement. No adjustments, no drivers needed. I know it works on windows machines without drivers. Some kind of generic human interface thing.

Is there Hardware compatibility list of stuff that works with Puppy somewhere? I tried numerous other cams to no avail. Hope this helps someone avoid this.
I am using Puppy 431 frugal on a Compaq Presario V4000 Skype beta 2.1.0.47 installed as per this guide.

Posted: Tue 17 Nov 2009, 22:50
by r__hughes
Thanks to everyone to wrote in this article and thanks Paddy for your ref to the M'Soft Lifecam VX-700. I had tried a couple of cheapo webcams with no success but this worked out of the box on my frugal pup421 and pup431 - all I had to do was use Xorg rather than Xvesa.

I bought the VX-700 for around C$25 here in Montreal. I don't know if any of the other VX series work but they seem to be up to VX-6000 now.

I d'loaded the skype_static-2.1.0.47.tar.bz2 file as per instructions, unzipped it, renamed the folder to skype & put the whole folder in my mnt/home with symlink to /usr/share. I put the skype symlink on the desktop as described & it worked first time ( although I had voice only until I got the VX-700)

My computer is a Dell Latitude D610 Laptop which can now travel in style in Linux :)

Posted: Mon 07 Dec 2009, 19:25
by scrat
Thanks a lot. All working on my crotchety pc.

Any way of changing the fonts size of the program? I'm older than my fabulous pc...

Skype 123 was easy

Posted: Thu 10 Dec 2009, 19:05
by Mitchellray
Hello Iguleder,
The Skype install went according to steps.
I had no problems whatsoever.
My soundcard had already been configured and bark tested successfully by Puppy on bootup process.
Skype testing call worked on the very first try!
That was a first for me.
Every previous attempt to install Skype in other Linux distro's resulted in a bit of...
(Previously, I thought I had determined that my hardware would only function with 'older' versions of Skype for linux and I had saved one for future use. Now it seems that determination was incorrect.)

When working from Slackware and Fedora, there was an issue with the capture and the mixers are a bit confusing with pink, red, or green lights.
As you indicated, trial and error prevailed more than once over memory and lack of experience.
Thanks much.
Mitchellray

Posted: Fri 11 Dec 2009, 06:27
by tlchost
sunburnt wrote:I made a SFS file out of it and it works great!
If you want to you can post it...
Was it posted? If not, I can host it for you.

Thom

Posted: Wed 16 Dec 2009, 07:47
by Iguleder
It's quite easy to create an SFS from skype.

Download skype_static-2.1.0.47.tar.bz2 ...

tar xjf skype_static-2.1.0.47.tar.bz2
mv skype_static-2.1.0.47 skype
mkdir -p skypesfs/usr/share
mv skype skypesfs/usr/share
mksquashfs skypesfs


By the way, I think I can write a script that automatically downloads the latest Skype and creates an SFS. I already created automatic compilation scripts for Vim, udev and Dropbear ... whaddya think?

Skype Mic not working ASUS 1005HA

Posted: Mon 28 Dec 2009, 23:31
by Mitchellray
Hello,
(I have had previous success with these instructions on my desktop.)
Now I tried the Puppy 4.3.1 on my 1005HA and I installed Skype per link and instructions.
However, the mic will not pick up. The mic works in skype in xp on this machine.
I tried the options sound options, but there are only two that are not USB.
I tried both ALSA mixer and Zmixer. Zmixer will not let me move the slider for mic.
I could not follow some of the previous posts and whether the suggestions would address this problem.
Mitchellray

Alsa Mixer

Posted: Tue 05 Jan 2010, 09:48
by KC Lee
Really nice guide Igulder. Many thanks!

Michellray: I am very new to Puppy and I had the same problem after installing Skype. Solved it by using Alsa Mixer. Use the "Tab" and "up key" to adjust volume, mic, capture etc and it works! Good luck. Don't give up on puppy - it's so good.

Thank you Barry and the team!

Posted: Wed 24 Mar 2010, 20:51
by tom4jean
Under quirky 010 does not start and I get this from the Command line;

# ./skype
./skype: error while loading shared libraries: libXss.so.1: cannot open shared object file: No such file or directory
#

EDIT;

I got the files libXss from here;
http://www.puppylinux.ca/tpp/ttuuxxx/Libs/

Copied them to /usr/lib

And it works. :D

Re: [HowTo] Install Skype on Puppy

Posted: Mon 29 Mar 2010, 09:46
by Bluebris
A wonderful guide, even for a Puppy linux newbie like me.

Thank you so much!

Actually it was easier to get Skype working on puppy than on Ubuntu (which was a nightmare with Skype) and Mint (which was easier than Ubuntu, but still harder than Puppy!).

Thanks again!

Mic in Skype

Posted: Fri 02 Apr 2010, 19:58
by arslan79
Hello! Could anyone here help me?

I`ve just installed Skype (2.0.0.72). Hardware: Acer aspire one 110. The same Puppy with the same Skype works on laptop HP Compaq 6720s. Also, on this netbook (acer aspire one) with Ubuntu 9.04 Skype works well enoogh. Buil-in microphone works. In Puppy`s Skype the built-im mic doesnt work, I tried to setup devices in Preferences, I tried to setup ALSA Mixer - but I cant make this MIC work ((( Please help!