Page 1 of 2
Re: inxi :: a full featured system information script
Posted: Sun 02 Sep 2012, 19:41
by tazoc
rokytnji wrote:Just a report in Racy 5.2.2 if you need it. I just installed version 0.9.
I usually use H2's and Trash's
inxi script instead in my Puppy installs.
Thank you rokytnji.
Didn't know about inxi; here's my first attempt:
Code: Select all
bash-4.1# cd /usr/local/bin && wget -Nc smxi.org/inxi && chmod +x inxi
bash-4.1# inxi
CPU~Dual core AMD Athlon 7750 (-MCP-) clocked at 1350.000 Mhz Kernel~3.0.3 x86_64 Up~4:34 Mem~1749.2/3707.5MB HDD~640.1GB(54.1% used) Procs~208 Client~Shell inxi~1.8.14
<root> /usr/local/bin
bash-4.1# inxi -Fz
System: Host: Mariner7 Kernel: 3.0.3 x86_64 (64 bit) Desktop: N/A Distro: Lighthouse64 5.14.2-B4 514.2
Machine: Mobo: ASUSTeK model: M3A78-EM version: Rev X.0x Bios: American Megatrends version: 2003 date: 10/12/2009
CPU: Dual core AMD Athlon 7750 (-MCP-) cache: 1024 KB flags: (lm nx sse sse2 sse3 sse4a svm)
Clock Speeds: 1: 1350.00 MHz 2: 1350.00 MHz
Graphics: Card: ATI Radeon HD 3200 Graphics X.org: 1.9.5 driver: fglrx tty size: 107x23 Advanced Data: N/A for root
Audio: Card-1: ATI RS780 Azalia controller driver: HDA Intel Sound: ALSA ver: 1.0.24
Card-2: ATI SBx00 Azalia (Intel HDA) driver: HDA Intel
Network: Card-1: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller driver: r8169
IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Card-2: Realtek RTL8187 Wireless Adapter driver: rtl8187
IF: wlan0 state: down mac: <filter>
Drives: HDD Total Size: 640.1GB (54.1% used) 1: id: /dev/sda model: WDC_WD6401AALS size: 640.1GB
Partition: ID: swap-1 size: 4.29GB used: 0.04GB (1%) fs: swap
RAID: No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 208 Uptime: 4:38 Memory: 1704.6/3707.5MB Client: Shell inxi: 1.8.14
Posted: Mon 03 Sep 2012, 17:15
by rokytnji
Try
to find out how to get a more complete readout. Here is my Semplice Debian Unstable install inxi report.
Code: Select all
harry@biker:~$ inxi -Fxz
System: Host: biker Kernel: 3.2.0-3-486 i686 (32 bit, gcc: 4.6.3) Desktop: Openbox 3.5.0 Distro: Semplice 2.0.4 emily
Machine: System: IBM product: 679421U
Mobo: IBM model: IBM Bios: IBM version: 20KT46AUS date: 06/04/2004
CPU: Single core Intel Pentium 4 CPU (-UP-) cache: 256 KB flags: (sse sse2) bmips: 3588.63 clocked at 1794.317 MHz
Graphics: Card: NVIDIA NV6 [Vanta/Vanta LT] bus-ID: 01:00.0
X.Org: 1.12.3.902 drivers: nouveau (unloaded: fbdev,vesa) Resolution: 1024x768@85.0hz
GLX Renderer: Mesa DRI nv05 x86/MMX/SSE2 GLX Version: 1.2 Mesa 8.0.4 Direct Rendering: Yes
Audio: Card: Intel 82801BA/BAM AC'97 Audio Controller driver: snd_intel8x0 ports: 1c00 1840 bus-ID: 00:1f.5
Sound: Advanced Linux Sound Architecture ver: 1.0.24
Network: Card: Intel 82801BA/BAM/CA/CAM Ethernet Controller driver: e100 ver: 3.5.24-k2-NAPI port: 2000 bus-ID: 02:08.0
IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 100.1GB (-) 1: id: /dev/sda model: SAMSUNG_SV6003H size: 60.1GB
2: id: /dev/sdb model: IC35L040AVVA07 size: 40.0GB
Partition: ID: / size: 27G used: 3.1G (12%) fs: ext3
Sensors: System Temperatures: cpu: 32.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 97 Uptime: 6:46 Memory: 378.4/1136.6MB Runlevel: 2 Gcc sys: 4.7.1 Client: Shell inxi: 1.8.14
This box triple boots MacPup 529, AntiX 12, and Semplice 2.0.4. It is one of my motorcycle shop pl,ay around boxes for my customers. Trips them out when they don't hear the Wiindows welcome sound but a Harley starting up sound instead,
http://antix.freeforums.org/custom-icew ... t2404.html
Sys-Info and Report-Video 1.4
Posted: Tue 02 Oct 2012, 19:33
by tazoc
Sys-Info and Report-Video 1.4 released
Change log
report-video -q |
--quiet for silent report generation, (same option available in sys-info.)
report-video -d |
--driver to just output driver to CL and exit. (I use this in Lighthouse64 to avoid duplication of driver detection code with other apps that report the driver.)
Code: Select all
sh-4.1# report-video --driver
fglrx
sh-4.1#
-TaZoC
Installed on Macpup 529 frugal
Posted: Wed 03 Oct 2012, 03:22
by rokytnji
Code: Select all
Report Video 1.4 - Tue 2 Oct 2012 on macpup 529 - Linux 3.2.18 i686
Chip description:
0.0 VGA compatible controller: NVIDIA Corporation NV6 [Vanta/Vanta LT] (rev 15)
oem: NVidia
product: Riva TNT Chip Rev B1
X Server: Xorg Driver used: nouveau
X.Org version: 1.11.3
dimensions: 1280x1024 pixels (338x270 millimeters)
depth of root window: 24 planes
Tested OK on MacPUP 529. Quad booter Desktop with Antix,Semplice,Vector Linux 7 Gold STD, and Frugal Macpup 529.
sys-info 1.4.2 released
Posted: Tue 30 Oct 2012, 20:24
by tazoc
Bugfix: escape codes sometimes appeared in report-video section of sys-info output
-TaZoC
Posted: Tue 30 Oct 2012, 23:18
by rokytnji
M&A Companion Netbook running Precise Puppy 5.4 off of external 8gig SD flash drive (frugal install with unetbootin and grub4dos to boot). My internal 30gig 4200 rpm zif pata ide drive is dying (clicking).
Installed 1.4.2 pet. PupSysinfo button grayed/faded out in gui but runs from command line in terminal ok.
Code: Select all
Report Video 1.4 - Tue 30 Oct 2012 on Precise Puppy 5.4 - Linux 3.2.29 i686
Chip description:
2.0 VGA compatible controller: Intel Corporation Mobile 945GSE Express Integrated Graphics Controller (rev 03)
oem: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
product: Intel(r) 82945GM Chipset Family Graphics Controller Hardware Version 0.0
X Server: Xorg Driver used: intel
X.Org version: 1.11.3
dimensions: 1024x600 pixels (270x158 millimeters)
depth of root window: 24 planes
copy of a system info file for reference.
Posted: Thu 17 Jan 2013, 03:57
by tom75
Attached is a copy of a Sys-Info configuration data file and a copy of my regular system information file for reference. Created using sys-info-1.4.2-noarch.pet
(summary only below)
Code: Select all
Report Video 1.4 - Wed 16 Jan 2013 on Precise Puppy 5.4.3 - Linux 3.2.29 i686
Chip description:
2.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
oem: Intel(r)Cantiga Graphics Chip Accelerated VGA BIOS
product: Intel(r)Cantiga Graphics Controller Hardware Version 0.0
X Server: Xorg Driver used: intel
X.Org version: 1.11.3
dimensions: 1280x800 pixels (338x211 millimeters)
depth of root window: 24 planes
And the Normal system Information (summary only below)
Code: Select all
Processor 2x Intel(R) Pentium(R) Dual CPU T3200 @ 2.00GHz
Memory 2980MB (1217MB used)
Display - Resolution 1280x800 pixels
OpenGL Renderer Mesa DRI Mobile IntelĀ® GM45 Express Chipset x86/MMX/SSE2
X11 Vendor The X.Org Foundation
Multimedia - Audio Adapter HDA-Intel - HDA Intel
sys-info 1.5.1 released
Posted: Fri 01 Feb 2013, 00:59
by tazoc
Change log
sys-info, video-info 1.5.1 Renamed report-video to
video-info to avoid overwriting BarryK's report-video.
Instead of --center, use gtkdialog property
window-position=1, for smooth dialog re-size, thanks to Thunor and Radky.
Requirements
Xorg (included in most Pups)
PupControl or PupSysInfo by Radky is suggested but not required, (if not, PupSysInfo button is grayed-out.)
-TaZoC
Posted: Fri 01 Feb 2013, 01:30
by don570
Barry Kauler has a new localised version of report-video
available on WOOF.
http://bkhome.org/fossil/woof2.cgi/info/445ca3627b
I am writing an app called report-system which is essentially
my version of report-video renamed.
_________________________________________________
sys-info 1.5.2 released
Posted: Fri 08 Mar 2013, 20:30
by tazoc
Sys-info 1.5.2 Bugfixed pinstall.sh for Woof build, thanks to 01micko.
Improved driver detection in VirtualBox guest.
-TaZoC