(old)Puppy Linux Discussion Forum

CONFIG_HID_LOGITECH_DJ=m -----------> CONFIG_HID_LOGITECH_DJ=y

In kernel hid section. That is needed with 3.2.X kernel. Proved to work with new logitech usb receiver. It is changed behavior and the logitech usb receiver does not work oob without compiling the module in, not as module. The fix has been verified with Exprimo and Saluki kernel.

# CONFIG_IWLWIFI is not set
Previously iwlagn is now iwlwifi, it needs to be enabled and to have corresponding firmwares to be installed. I can provide my firmware package later, if there is need for them

make menuconfig > main menu > networking support > bluetooth subsystem support:

# FIR device drivers
#
CONFIG_BT=m
# CONFIG_BT_L2CAP is not set -------> enable
# CONFIG_BT_SCO is not set ---------> enable
and all the subsequent options also which will pop up when you enable these:

CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

You have bluetooth as module but not the communications modules.

BTL2CAP is a protocol that sits directly ontop of BTHCI_ACL and which prodives signalling and sessions between applications on two Bluetooth devices.

The btsco driver provides support for Bluetooth SCO Audio devices through the audio driver.

The RFCOMM protocol supports up to 60 simultaneous connections between two BT devices.

etc....
You have enabled the a lot bluetooth modules, you need protocols which handles the communications.

I think bluetooth support would be good for precise pangolin.

Missing module iwlagn for Intel Wireless.

Missing libLLVM needed for mesa-dri modules, what are included.

Missing liblzma needed for squasfs-tools.

Missing libpci needed for lspci.

There isnt iwlagn anymore. It has been replaced by iwlwifi. And iwlwifi is not included.
So....iwlwifi is missing is the correct post.

md5sum ok for alpha2

Terryphi wrote:Latest Flash (11.1.102.63) crashes with a segmentation fault on all browsers tested.

Flash

linux28 wrote:

Terryphi wrote:Latest Flash (11.1.102.63) crashes with a segmentation fault on all browsers tested.

Flash

Same problem with latest Flashplayer 11.2.202.228. The problem only occurs with Precise Puppy. Flash works well with Racy and Wary.

# gtkhash

(gtkhash:11258): GLib-GIO-ERROR **: No GSettings schemas are installed on the system
Trace/breakpoint trap
#

Posted in error.

Flash just wants dependency to be met. This with Firefox 11 with wrapper script to launch firefox:
/usr/bin/firefox --------->script to launch firefox:

#!/bin/sh
/usr/lib/firefox/run-mozilla.sh /usr/lib/firefox/firefox "$@"

Magical juice: libcurl3-gnutls.....maybe librtmp0....suggest to install it also...as posted previously.....Maxerro ?

pemasu,

Thanks for the flashplayer fix. All Precise Puppy needs is librtmp0 which can be downloaded from the ubuntu-precise-main repository using Puppy Package Manager.

evince,fbreader,gimp
Download a lot dependent on run up

libcairo-gobject2_1.10.2-6.1ubuntu2_i386.deb
libgail-3-0_3.3.20-0ubuntu1_i386.deb
libgrip0_0.3.4-0ubuntu1_i386.deb
liblaunchpad-integration-3.0-1_0.1.54build1_i386.deb
libmtdev1_1.1.0-2ubuntu1_i386.deb
libutouch-evemu1_1.0.8-0ubuntu1_i386.deb
libutouch-frame1_2.2.2-0ubuntu1_i386.deb
libutouch-geis1_2.2.7-0ubuntu2_i386.deb
libutouch-grail1_3.0.3-0ubuntu1_i386.deb
........
All install will not work

-precise saved with fido (non root) on power-off or reboot stops in terminal mode complaining about not finding 'sudo', and must be restarted with CtrlAltDel.....

-/usr/share/geany/ is empty ! (no C...language highlight, etc)

-makesquasfs is complaing for missing liblzma, after install is ok

I made an wireshark 1.6.5.2-precise.sfs for anybody interested can be download at:
http://www.datafilehost.com/download-289009cf.html

1. Live cd
2. ACPI=OFF on boot
3.wireless RT-73 Tried SNS, Dougal & then install frisbee, connected!!!
4. Downloaded the missing librtmp0 = flash working!
intel p4 2.40ghz 1500Mz ram


Cruzn the pup--think I'll try netbootin on a usb.
Seems to work pretty good. Lucid is my favorite to date. Saluki is getting sweeter by the day toooooo.
Thank you so much for the Puppies!

ferikenagy wrote:-precise saved with fido (non root) on power-off or reboot stops in terminal mode complaining about not finding 'sudo', and must be restarted with CtrlAltDel.....

-/usr/share/geany/ is empty ! (no C...language highlight, etc)

-makesquasfs is complaing for missing liblzma, after install is ok

I made an wireshark 1.6.5.2-precise.sfs for anybody interested can be download at:
http://www.datafilehost.com/download-289009cf.html

There are other software suitable for precise?

Firefox Extended Support Release 10.0.3

GConf Error: Failed to activate configuration server: The name org.gnome.GConf was not provided by any .service files

CUPS Printer Wizard is not working for me.

Cannot connect to localhost:631

Can anyone confirm that they see this problem?

GLib-GIO-ERROR **: No GSettings schemas are installed on the system
Trace/breakpoint trap
#

started via xorgwizard and xwin.
alt+drag to see bottom of startup splash window.
network wizard open wifi connected.
portable opera browsed.
created save file.

here is a background for precise puppy (1024x768).



Uploaded with ImageShack.us