(old)Puppy Linux Discussion Forum

Code: Select all

# report-video
VIDEO REPORT: Slacko Puppy, version 5.9.3

Chip description:
VGA compatible controller: nVidia Corporation C68 [GeForce 7050 PV / nForce 630a] (rev a2)

Requested by /etc/X11/xorg.conf:
  Resolution (widthxheight, in pixels): 1024x768x16
  Depth (bits, or planes):              24
  Modules requested to be loaded:       dbe 

Probing Xorg startup log file (/var/log/Xorg.0.log):
  Driver loaded (and currently in use): nouveau
  Loaded modules: dbe dri2 exa extmod fb glx kbd mouse shadowfb

Actual rendering on monitor:
  Resolution:  1440x900 pixels (380x238 millimeters)
  Depth:       24 planes

...the above also recorded in /tmp/report-video

Code: Select all

# glxgears
Running synchronized to the vertical refresh.  The framerate should be
approximately the same as the monitor refresh rate.
4464 frames in 5.0 seconds = 892.783 FPS
4743 frames in 5.0 seconds = 948.588 FPS
4769 frames in 5.0 seconds = 953.559 FPS
4637 frames in 5.0 seconds = 927.350 FPS
4816 frames in 5.0 seconds = 963.009 FPS
4761 frames in 5.0 seconds = 952.112 FPS
4845 frames in 5.0 seconds = 968.981 FPS

Code: Select all

-Computer-
Processor		: 2x AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
Memory		: 3111MB (332MB used)
Machine Type		: Physical machine
Operating System		: Slacko Puppy - 5.9.3
User Name		: root (root)
Date/Time		: Sun 22 Jun 2014 10:34:34 PM CDT
-Display-
Resolution		: 1440x900 pixels
OpenGL Renderer		: Gallium 0.4 on NV67
X11 Vendor		: The X.Org Foundation
-Audio Devices-
Audio Adapter		: HDA-Intel - HDA NVidia

Code: Select all

# report-video
VIDEO REPORT: Slacko Puppy, version 5.9.3

Chip description:
VGA compatible controller: Intel Corporation 82865G Integrated Graphics Controller (rev 02)

Requested by /etc/X11/xorg.conf:
  Resolution (widthxheight, in pixels): 1024x768
  Depth (bits, or planes):              24
  Modules requested to be loaded:       dbe 

Probing Xorg startup log file (/var/log/Xorg.0.log):
  Driver loaded (and currently in use): intel
  Loaded modules: dbe dri2 extmod fb glx kbd mouse

Actual rendering on monitor:
  Resolution:  1024x768 pixels (270x203 millimeters)
  Depth:       24 planes

...the above also recorded in /tmp/report-video

Code: Select all

# glxgears
Running synchronized to the vertical refresh.  The framerate should be
approximately the same as the monitor refresh rate.
378 frames in 5.0 seconds = 75.591 FPS
376 frames in 5.0 seconds = 75.143 FPS
376 frames in 5.0 seconds = 75.143 FPS
376 frames in 5.0 seconds = 75.143 FPS

Code: Select all

-Computer-
Processor		: 2x Intel(R) Pentium(R) 4 CPU 3.00GHz
Memory		: 2063MB (187MB used)
Machine Type		: Physical machine
Operating System		: Slacko Puppy - 5.9.3
User Name		: root (root)
Date/Time		: Sun 22 Jun 2014 10:50:48 PM CDT
-Display-
Resolution		: 1024x768 pixels
OpenGL Renderer		: Mesa DRI Intel(R) 865G x86/MMX/SSE2
X11 Vendor		: The X.Org Foundation
-Audio Devices-
Audio Adapter		: ICH4 - Intel ICH5

Code: Select all

# free
             total         used         free       shared      buffers
Mem:       2063616       593272      1470344            0        61240
-/+ buffers:             532032      1531584
Swap:      2150396            0      2150396
#

Code: Select all

--- old/init	2014-06-23 01:54:16.000000000 +0200
+++ new/init	2014-06-23 12:59:34.000000000 +0200
@@ -1679,11 +1679,12 @@
    do
     ONEBASE="`basename $ONEEXTRA`"
     EXTRASFSLIST="${EXTRASFSLIST}${ONEBASE} " #construct list of actually used.
+    mknod /dev/loop${CNTLOOP} b 7 ${CNTLOOP}
     losetup /dev/loop${CNTLOOP} $ONEEXTRA
     mount -r -t squashfs -o noatime /dev/loop${CNTLOOP} /pup_ro${CNTLOOP}
     [ $? -eq 0 ] && UMNTRO="${UMNTRO}:/pup_ro${CNTLOOP}=ro"
     CNTLOOP=`expr $CNTLOOP + 1`
-    [ $CNTLOOP -eq 10 ] && break
+    [ $CNTLOOP -eq 11 ] && break
     #...only support adding 3 extra .sfs files, as performance degrades as each layer added.
     #...v410 bugfix, change 6 to 7 so can have 3 sfs files.
     #...w015 change 7 to 10 so can have 6 sfs files.