Page 85 of 118
Posted: Tue 28 Feb 2012, 06:21
by otropogo
zigbert wrote:...
2. It's impossible to blank a CD or DVD using sr1, as pburn 3.5 only looks at sr0 for this task.
You can choose burner device in the burn-option dialog or permanent in the preferences
Ok. That works, thanks.
3. There's no option to verify a copy of a data disc in pburn 3.5
It is not possible (as far as I know) to verify when burning multisession. You have to choose to close the disc to get the verify option in the finish dialog..... more in help file.
Nope. I wasn't burning an iso, but "copying a data disk". So far as I know, there was no option to burn multisession, and indeed the original disk I copied wasn't multisession either. Nor do I recall an option to "close the disk".
Posted: Wed 29 Feb 2012, 09:10
by zigbert
otropogo wrote:Nope. I wasn't burning an iso, but "copying a data disk". So far as I know, there was no option to burn multisession, and indeed the original disk I copied wasn't multisession either. Nor do I recall an option to "close the disk".
I'll check, thank you
Sigmund
Posted: Wed 29 Feb 2012, 23:42
by Jades
sebus wrote:Jades wrote:... it would be unlikely I would have managed to salvage much.
Ofcourse you could just copy it to remote machine via network, or to a local USB stick...
That assumes that I have a remote machine or a USB stick with enough spare capacity to receive the data, and in the case of the former that the network connection is reliable enough for backup purposes (it probably isn't).
The truly mission-critical stuff had been copied to other machines ages ago, the stuff I ended up burning to disc was more in the category "would be nice to salvage" or were save files from games. Pburn came in handy very after XP wouldn't boot at all.
Posted: Sun 04 Mar 2012, 18:20
by zigbert
Version 3.5.1
See main post
Changelog
- Verify copied data-disc. (thanks to otropogo)
- If more than 1 device is detected, show startup-check window. (thanks to Jades)
- Choose temporary-storage-directory is now more flexible. (thanks to sebus)
- Set a unique date/time tag to default logfile name. (thanks to otropogo)
- Do not show terminal pre-operation window if ffmpeg is NOT in command.
- Open support of xterm as an alternative terminal to rxvt. (thanks to big_bass)
- Accept netsurf, midori, chrome, iron as alternative html viewers.
- NLS: Removed: LOC317
- NLS: Helpfile: New item in chapter 4, potentional pitfalls. (thanks to Jades)
Posted: Sun 04 Mar 2012, 18:37
by zigbert
item 2 involves 2 optical devices, which I don't have...... untested.
item 1 partly involves 2 optical devices....
Posted: Sun 04 Mar 2012, 18:40
by zigbert
I suddenly realize why I sometimes feel a bit fed up by this app.
Posted: Mon 05 Mar 2012, 06:52
by sebus
Isn't it a front-end and not an app?
sebus
Posted: Mon 05 Mar 2012, 07:58
by disciple
http://en.wikipedia.org/wiki/Application_software
Application software, also known as an application or an "app", is computer software designed to help the user to perform specific tasks.
It certainly fits that definition of an "app".
What definition are you using?
Posted: Mon 05 Mar 2012, 16:35
by zigbert
sebus wrote:Isn't it a front-end and not an app?
disciple wrote:It certainly fits that definition of an "app".
The world is rather confusing, isn't it?
Posted: Mon 05 Mar 2012, 18:53
by sebus
Don't worry, I am grateful for this really useful front-end app
Keep up the good work!
sebus
Posted: Mon 05 Mar 2012, 22:46
by Jades
Apologies for brief report, will give more detail later. I installed and ran Pburn 3.5.1 on my K6-2 500 on an assortment of versions of Puppy, including some pfix=ram boots. On pfix=ram boots I did the basic setup without installing anything other than Pburn 3.5.1. Brief computer specs relevant to the test are:-
System is 'Zhaan', my K6-2 500 machine. See sig for details.
Burner is Sony CRX100E. Secondary Master. Usually sr0.
Secondary slave is Hitachi GD-5000, a DVD-ROM drive. Usually sr1.
On this system, Pburn correctly identifies the burner device on the fresh installs as well as the previously existing ones. Upon accepting the initial dialogue it goes through as normal and correctly shows the status of the current disc. I have burnt a Wary 5.2.2 ISO to a Memorex 1x-4x CDRW, successfully booted pfix=ram from that disc and installed Pburn 3.5.1.
I will test the Pentium D tomorrow. This is a potentially tricky setup with no primary ATA drives, a DVD writer as Secondary ATA Master and a DVD-ROM drive as Secondary ATA Slave. The HDD, which is Tertiary Master, is a dodgy SATA unit. The machine is currently booted from a LiveCD with a Pupsave on a USB stick.
Posted: Wed 07 Mar 2012, 16:34
by Jades
OK, done the tests on the other machine. Details below.
'Merlin', Pentium D 3.4 GHz.
Burner device is LITE-ON SHM-165P6S. ATA Secondary Master, sr0.
DVD-ROM drive is an MSI StarSpeed 16x. ATA Secondary Slave, sr1
On this machine too Pburn's guess as to which was the burner was correct. Interestingly, it seems that on the pfix=ram boots I've tested on both machines Puppy sets sr1, as both /dev/crdom and dev/dvd although in my case this doesn't seem to matter. The burners in both machines are the master device so Pburn's seeming default of sr0 will be correct every time.
Oddly, the mainboard in my Pentium D classes the SATA channel as Tertiary, so if the only burner in the machine was a SATA device and I still had the DVD-ROM drive on the Secondary ATA controller the burner would probably be classed as sr1 - assuming that Puppy works from Primary Master up over to assign ids.
Posted: Wed 07 Mar 2012, 17:07
by zigbert
Jades
Thank you for this feedback. It is very valuable to Pburn.
On this machine too Pburn's guess as to which was the burner was correct. Interestingly, it seems that on the pfix=ram boots I've tested on both machines Puppy sets sr1, as both /dev/crdom and dev/dvd although in my case this doesn't seem to matter. The burners in both machines are the master device so Pburn's seeming default of sr0 will be correct every time.
Be aware that Pburn does not rely on the OS's detection of opticals. I don't anything about that subject. Pburn only has a silly detection if the name of the device contains RW/writer.
Ok, now I can close this case and move on. In fact, I already did today......
Drove the 40km to the nearest civilization to buy a BD-RE disc. Pburn should by now support BD-R and BD-R doublelayer, but BD-RE has never been tested. - You know what, I did not find any disc to buy!!! (this is 2012). In one of the stores the guy told: "those disc are extremely rare and _very_ expensive." - I wonder if he meant he was the one to pay?
Some experiences reminds me how far out I live.
Sigmund
still can't copy audio disk, now can't save burn log either
Posted: Wed 14 Mar 2012, 06:00
by otropogo
Just tried the audio disk copy function in 3.5.1 for the first time. It failed with an "unknown error" popup. I tried first at the slowest speed, on the fly, then on auto also on the fly, with the same result. The target disk remained a blank RW according to the 'info" tool.
Each time I tried to save the log, and when I did, it showed a nice new log name format, which wouldn't save.
I then tried a third time, but modified the file name, taking out the hours and minutes and the colons, and then it saved:
Pburn version 3.5.1
###################################################
COMMAND:
###################################################
cdda2wav dev=/dev/sr1 -no-infofile -B -Oraw - | cdrecord dev=/dev/sr1 -v fs=32m driveropts=burnfree -pad -audio -raw96r /mnt/sda3/pburntmp/pburn*.inf
###################################################
OUTPUT:
###################################################
scsidev: '/dev/sr1'
devname: '/dev/sr1'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 32768
Error trying to open /dev/sr1 exclusively (Device or resource busy)... retrying in 1 second.
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Error trying to open /dev/sr1 exclusively (Device or resource busy)... retrying in 1 second.
TOC Type: 0 = CD-DA
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'TSSTcorp'
Identification : 'CD/DVDW SH-S162L'
Revision : 'TS05'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A (CD-RW)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW) (current)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1582592 = 1545 KB
FIFO size : 33554432 = 32768 KB
Encoding speed : 903x (67706 sectors/s) for libedc from Heiko Eißfeldt
wodim: No such file or directory. Cannot open '/mnt/sda3/pburntmp/pburn*.inf'.
Type: ROM, Vendor 'TSSTcorp' Model 'CD/DVDW SH-S162L' Revision 'TS05' MMC+CDDA
176128 bytes buffer memory requested, 4 buffers, 13 sectors
Read Full TOC MMC failed (probably not supported).
Errno: 5 (Input/output error), read toc size scsi sendcmd: no error
CDB: 43 00 00 00 00 00 01 00 04 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 4
cmd finished after 0.002s timeout 60s
Read TOC size failed.
Since the pointer of shame seemed to be indicating my USB target burner, I then reversed the two to burn with sr0 instead of sr1, and got the same enigmatic popup and the following burn log:
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
Type: ROM, Vendor 'TSSTcorp' Model 'CD/DVDW SH-S162L' Revision 'TS05' MMC+CDDA
176128 bytes buffer memory requested, 4 buffers, 13 sectors
Read TOC CD Text failed (probably not supported).
#icedax version 1.1.10, real time sched., soundcard, libparanoia support
AUDIOtrack pre-emphasis copy-permitted tracktype channels
1-21 no no audio 2
Table of Contents: total tracks:21, (total time 72:56.70)
1.( 4:36.60), 2.( 3:56.32), 3.( 2:16.73), 4.( 3:05.54), 5.( 4:14.25),
6.( 3:43.45), 7.( 3:14.00), 8.( 3:49.65), 9.( 2:38.40), 10.( 3:17.01),
11.( 3:52.70), 12.( 3:54.28), 13.( 2:51.29), 14.( 3:38.48), 15.( 5:05.52),
16.( 3:49.43), 17.( 2:49.20), 18.( 2:09.00), 19.( 2:14.05), 20.( 3:55.19),
21.( 3:43.36)
Table of Contents: starting sectors
1.( 0), 2.( 20760), 3.( 38492), 4.( 48765), 5.( 62694),
6.( 81769), 7.( 98539), 8.( 113089), 9.( 130329), 10.( 142219),
11.( 156995), 12.( 174465), 13.( 192043), 14.( 204897), 15.( 221295),
16.( 244222), 17.( 261440), 18.( 274135), 19.( 283810), 20.( 293865),
21.( 311509), lead-out( 328270)
CDINDEX discid: hqDSgNyYjw0MvN8_rM9w8Jg84OU-
CDDB discid: 0x52111815
CD-Text: not detected
CD-Extra: not detected
W Bulk mode is disabled while outputting to a pipe
samplefile size will be 772091040 bytes.
recording 4376.9333 seconds stereo with 16 bits @ 44100.0 Hz ->'-'...
percent_done:
0%Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
0%TOC Type: 0 = CD-DA
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVDRAM GSA-H10N '
Revision : 'JL10'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A (CD-RW)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R)
Profile: 0x000A (CD-RW) (current)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 12264 kB/s 69x C
PS. before switching, I put the target disk through the blanking process again, and again, success was proclaimed:
Pburn version 3.5.1
###################################################
COMMAND:
###################################################
cdrecord blank=fast -v dev=/dev/sr0 driveropts=burnfree
###################################################
OUTPUT:
###################################################
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVDRAM GSA-H10N '
Revision : 'JL10'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A (CD-RW)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R)
Profile: 0x000A (CD-RW) (current)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 14178 kB/s 80x CD 10x DVD
Speed set to 1764 KB/s
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 3
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11745 (97:25/30)
ATIP start of lead out: 359848 (79:59/73)
1T speed low: 4 1T speed high: 10
2T speed low: 4 2T speed high: 0 (reserved val 6)
power mult factor: 1 5
recommended erase/write power: 5
A1 values: 24 1A D8
A2 values: 26 B2 4A
Disk type: Phase change
Manuf. index: 40
Manufacturer: INFODISC Technology Co., Ltd.
Starting to write CD/DVD at speed 10.0 in real BLANK mode for single session.
Last chance to quit, starting real write in 4 seconds.????????????? 3 seconds.????????????? 2 seconds.????????????? 1 seconds.????????????? 0 seconds. Operation starts.
Performing OPC...
Blanking PMA, TOC, pregap
Blanking time: 20.430s
Strangely, after this switch the info tab stubbornly showed only information on the source disk, whether I put it in sr0 or sr1.
Hope this helps someone. On my system Pburn seems to be perpetually cursed.
Posted: Sat 17 Mar 2012, 01:56
by stiginge
zigbert wrote:Be aware that not all CD-player supports CD-R, and even fewer supports CD-RW. It seems to me that the more expensive the CD-player is, the more sensitive it is to home-brewed discs.
BUT, of course, - it should work in the same device that you burnt it in...
For the benefit of Pburn, it would be good if you tested another burner app with the same burner. Like this, I would 'know' if it is Pburn or your hardware that is the trouble.
Thank you
Sigmund
Good call zigbert, I tried a cd-r the other day and it worked, smooth as a freshly-poured pint of Guinness. Have 1 on me this St. Patrick's Day!
Posted: Sat 17 Mar 2012, 16:53
by zigbert
No St.Patrick in Norway, but there is always an excuse for a pint...
Sigmund
pburn fails to burn audio from .toc file
Posted: Sun 25 Mar 2012, 23:01
by hanzf
I tried to burn an audio CD from a toc file, and pburn 3.3.7 said "unknown error".
Here's the log file:
Code: Select all
Pburn version 3.2.3
###################################################
COMMAND:
###################################################
cdrecord dev=/dev/cdrom -raw96r -clone -v ""
###################################################
OUTPUT:
###################################################
/root/.pburn/tmp/exec2_preburn: line 1: /root/.pburn/tmp/exec_preburn: No such file or directory
scsidev: '/dev/cdrom'
devname: '/dev/cdrom'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'PHILIPS '
Identification : 'DVDR1660P1 '
Revision : 'P1.5'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96R
Drive buf size : 1073152 = 1048 KB
FIFO size : 12582912 = 12288 KB
Encoding speed : 637x (47763 sectors/s) for libedc from Heiko Eißfeldt
wodim: No such file or directory. Cannot open ''.
Can that be fixed or worked around?
thank you
Posted: Mon 26 Mar 2012, 17:26
by sebus
First upgrade to current version...
sebus
Posted: Mon 26 Mar 2012, 21:47
by hanzf
sebus wrote:First upgrade to current version...
sebus
Sorry for accidently posting the 3.2.3 log.
3.5.1 does not run because:
Code: Select all
/usr/local/pburn/box_splash: line 27: gtkdialog4: command not found
/usr/local/pburn/pburn: line 165: gtkdialog4: command not found
Killed
This is the log from 3.3.7:
Code: Select all
Pburn version 3.3.7
###################################################
COMMAND:
###################################################
cdrecord dev=/dev/sr0 -raw96r -clone -v ""
###################################################
OUTPUT:
###################################################
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'PHILIPS '
Identification : 'DVDR1660P1 '
Revision : 'P1.5'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96R
Drive buf size : 1073152 = 1048 KB
FIFO size : 12582912 = 12288 KB
Encoding speed : 614x (45987 sectors/s) for libedc from Heiko Eißfeldt
wodim: No such file or directory. Cannot open ''.
Posted: Mon 26 Mar 2012, 21:55
by zigbert
hanzf
Are you aware of this
Changelog
Version 3.5.0, 25.Feb 2012
- Improved Blu-ray (BD-R) support.
- Detection of DVD-mediatype in disc-info window.
- Detection of Blu-ray in burn-options window.
- First run installation is now done in 'no' time. (thanks to big_bass)
- Bugfix: Blu-ray discs was detected as DVD in statusbar. (thanks to flash)
- Bugfix: Size-detection of burnt BD-R sessions in statusbar. (thanks to flash)
- Bugfix: mkdir $HOME/my-documents/tmp if not exist and using as the default temporary storage. (thanks to big_bass)
- Bugfix: Startup-check for temp-dir always shows up if placed inside /mnt/home. (thanks to otropogo)
- Bugfix: Pburn won't open burn-option dialog if previous sessions contains not valid joliet extensions.
- Bugfix: Detect optical device in Porteus (thanks to Ahua in the Porteus forum)
- Bugfix: Not allowing capitals in file extension - *.CUE and *.TOC (thanks to sebus)
- Bugfix: Tray autoloads at once it has opened tray.
- NLS: Added: LOC395
- NLS: Changed: LOC126, 240, 333, 392
- NLS: Removed: LOC400