Posted: Sat 17 Mar 2012, 16:53
No St.Patrick in Norway, but there is always an excuse for a pint...
Sigmund
Sigmund
Code: Select all
Pburn version 3.2.3
###################################################
COMMAND:
###################################################
cdrecord dev=/dev/cdrom -raw96r -clone -v ""
###################################################
OUTPUT:
###################################################
/root/.pburn/tmp/exec2_preburn: line 1: /root/.pburn/tmp/exec_preburn: No such file or directory
scsidev: '/dev/cdrom'
devname: '/dev/cdrom'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'PHILIPS '
Identification : 'DVDR1660P1 '
Revision : 'P1.5'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96R
Drive buf size : 1073152 = 1048 KB
FIFO size : 12582912 = 12288 KB
Encoding speed : 637x (47763 sectors/s) for libedc from Heiko Eißfeldt
wodim: No such file or directory. Cannot open ''.
Sorry for accidently posting the 3.2.3 log.sebus wrote:First upgrade to current version...
sebus
Code: Select all
/usr/local/pburn/box_splash: line 27: gtkdialog4: command not found
/usr/local/pburn/pburn: line 165: gtkdialog4: command not found
Killed
Code: Select all
Pburn version 3.3.7
###################################################
COMMAND:
###################################################
cdrecord dev=/dev/sr0 -raw96r -clone -v ""
###################################################
OUTPUT:
###################################################
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'PHILIPS '
Identification : 'DVDR1660P1 '
Revision : 'P1.5'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96R
Drive buf size : 1073152 = 1048 KB
FIFO size : 12582912 = 12288 KB
Encoding speed : 614x (45987 sectors/s) for libedc from Heiko Eißfeldt
wodim: No such file or directory. Cannot open ''.
The file name, and also the extension are both lowercase.zigbert wrote:hanzf
Are you aware of this
Changelog
Version 3.5.0, 25.Feb 2012
...
- Bugfix: Not allowing capitals in file extension - *.CUE and *.TOC (thanks to sebus)
...
Code: Select all
cdrecord dev=/dev/sr0 -raw96r -clone -v "/mypath/mycd.toc"
Code: Select all
# cdrecord dev=/dev/sr0 -raw96r -clone -v "/mnt/sda2/wln.toc"
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
...
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
wodim: No such file or directory. Cannot open '/mnt/sda2/wln.toc.toc'.
Code: Select all
# cdrecord dev=/dev/sr0 -raw96r -clone -v /mnt/sda2/wln
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
...
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
wodim: No such file or directory. Cannot open '/mnt/sda2/wln'.
Code: Select all
# mv wln.toc wln
# cdrecord dev=/dev/sr0 -raw96r -clone -v /mnt/sda2/wln
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
...
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
wodim: No such file or directory. Cannot open '/mnt/sda2/wln.toc'.
Code: Select all
# cp wln wln.toc
# cdrecord dev=/dev/sr0 -raw96r -clone -v /mnt/sda2/wln
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
...
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
wodim: Can only copy session # 1.
Seems like a perfect simulation of 4 teenagers mobbing a classmate...
cdrecord is not my friend.
yes, actually the messages come from wodim. I'll look for this cdrtools package.zigbert wrote: I don't know what Puppy you are running, but you should be aware of that most puppies does NOT use cdrecord. It is just a link to wodim from the cdrkit package. You might have more luck if you install the cdrtools package. Pburn will prefer cdrecord over wodim if exist.
Sebus reported that cdrecord was able to burn from cue-file, while wodim was not.
Sigmund
Oh, thank you. It's nice to know I'm not the only one to have this problem (or at least, to report it...)hanzf wrote:I tried to burn an audio CD from a toc file, and pburn 3.3.7 said "unknown error".
...
I see cdrtools in the repo (Slacko). What is wrong with that one?sebus wrote:But you have to compile it...
I use Fatdog x64 5.21
sebus