Page 2 of 90
Posted: Mon 27 Oct 2014, 09:43
by mavrothal
peebee wrote:
Equally cryptic.....
Cryptic I do not mind but not having desktop drive icons I do
Will any of the versions build for other puppies work?
Posted: Mon 27 Oct 2014, 10:25
by linux28
peebee wrote:
Equally cryptic.....
pup-volume-monitor-WARNING **: Couldn't connect to server at /tmp/pup_volume_monitor_socket: Connection refused
Segmentation fault
GLib-GIO-WARNING **: Tried to register an extension of the type (null) to extension point gio-volume-monitor. Expected type is GVolumeMonitor.
GLib-GIO-WARNING **: Tried to register an extension of the type (null) to extension point gio-volume-monitor. Expected type is GVolumeMonitor.
GLib-GObject-WARNING **: Two different plugins tried to register 'PupClientVolume'.
GLib-GObject-CRITICAL **: g_type_add_interface_dynamic: assertion 'G_TYPE_IS_INSTANTIATABLE (instance_type)' failed
GLib-GObject-WARNING **: Two different plugins tried to register 'PupClientDrive'.
GLib-GObject-CRITICAL **: g_signal_connect_data: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed
Segmentation fault
Posted: Mon 27 Oct 2014, 11:15
by peebee
mavrothal wrote:peebee wrote:
Equally cryptic.....
Cryptic I do not mind but not having desktop drive icons I do
Will any of the versions build for other puppies work?
Desktop_drive_icons should work I believe:
http://www.murga-linux.com/puppy/viewto ... 792#632792
Posted: Mon 27 Oct 2014, 11:17
by peebee
linux28 wrote:peebee wrote:
Equally cryptic.....
pup-volume-monitor-WARNING **: Couldn't connect to server at /tmp/pup_volume_monitor_socket: Connection refused
Segmentation fault
GLib-GIO-WARNING **: Tried to register an extension of the type (null) to extension point gio-volume-monitor. Expected type is GVolumeMonitor.
GLib-GIO-WARNING **: Tried to register an extension of the type (null) to extension point gio-volume-monitor. Expected type is GVolumeMonitor.
GLib-GObject-WARNING **: Two different plugins tried to register 'PupClientVolume'.
GLib-GObject-CRITICAL **: g_type_add_interface_dynamic: assertion 'G_TYPE_IS_INSTANTIATABLE (instance_type)' failed
GLib-GObject-WARNING **: Two different plugins tried to register 'PupClientDrive'.
GLib-GObject-CRITICAL **: g_signal_connect_data: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed
Segmentation fault
See:
http://www.murga-linux.com/puppy/viewto ... 680#793680
Posted: Mon 27 Oct 2014, 12:18
by mavrothal
peebee wrote:mavrothal wrote:peebee wrote:
Equally cryptic.....
Cryptic I do not mind but not having desktop drive icons I do
Will any of the versions build for other puppies work?
Desktop_drive_icons should work I believe:
http://www.murga-linux.com/puppy/viewto ... 792#632792
Neyh. It needs the the patched glib
I was wondering if it could be compiled statically and be a reasonable size.
6.0
Posted: Tue 28 Oct 2014, 00:16
by sszindian
Very nice work Phil !
My Config: Boot from live CD, savefile on HDD
Did an upgrade to Tahr-5.8.4_noPAE using the option available on boot from Tahr-6.0-CE_noPAE
Upgrade went well with no known issues and all previous installed programs work as they should.
>>>---Indian------>
Posted: Tue 28 Oct 2014, 00:52
by linux28
peebee wrote:linux28 wrote:peebee wrote:
Equally cryptic.....
pup-volume-monitor-WARNING **: Couldn't connect to server at /tmp/pup_volume_monitor_socket: Connection refused
Segmentation fault
GLib-GIO-WARNING **: Tried to register an extension of the type (null) to extension point gio-volume-monitor. Expected type is GVolumeMonitor.
GLib-GIO-WARNING **: Tried to register an extension of the type (null) to extension point gio-volume-monitor. Expected type is GVolumeMonitor.
GLib-GObject-WARNING **: Two different plugins tried to register 'PupClientVolume'.
GLib-GObject-CRITICAL **: g_type_add_interface_dynamic: assertion 'G_TYPE_IS_INSTANTIATABLE (instance_type)' failed
GLib-GObject-WARNING **: Two different plugins tried to register 'PupClientDrive'.
GLib-GObject-CRITICAL **: g_signal_connect_data: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed
Segmentation fault
See:
http://www.murga-linux.com/puppy/viewto ... 680#793680
# gunzip -c glib_2.40.0-tahr-090814.patch.gz > glib_2.40.0-tahr-090814
gzip: glib_2.40.0-tahr-090814.patch.gz: not in gzip format
installer libgio-2.0.so.0.4000.0-patched.pet
filesystem Not collapse
But it doesn't work
Do not display the unmounted partitions
Posted: Tue 28 Oct 2014, 01:32
by bark_bark_bark
@James C, where did you get that wallpaper from?
savefolder using symbolic links
Posted: Tue 28 Oct 2014, 02:24
by mikeslr
Hi gyro, or anyone else:
Huh?
Was this discussed in a previous thread?
If not, could you provide some details? How does it differ from an "ordinary" savefolder? How do you set up the symbolic links? To what? What are its potential advantages? That kind of stuff.
mikesLr
Posted: Tue 28 Oct 2014, 02:27
by Geoffrey
I've compiled xfce and have it running of a fashion, still needs work to get everything working, recompiled glib with the patch that's mentioned,
then compiled the pup-volume-monitor, it threw a few warnings in the compile but it's now working,
no segment faults, thunar filemanager shows drives and desktop also shows them.
Posted: Tue 28 Oct 2014, 05:32
by gcmartin
>>> error in browser caused duplication <<<
"save to folder" (savefolder) presented by @Gyro
Posted: Tue 28 Oct 2014, 05:33
by gcmartin
Not speaking for @Gyro, but, he did find some anomalies in save to folder efforts and provided some corrections.
His work did not make it into WOOFCE in time for this version generation. Hence the resolutions are being provided by him. They can only be gotten via the links he provides for the replacements to the ISO files that are shipped for TahrPUP6. I believe his offers merely corrects "save to folder" processing without making changes to the base TahrPUP6 system.
Hope this is accurate for the help he is trying to provide.
Re: savefolder using symbolic links
Posted: Tue 28 Oct 2014, 07:11
by gyro
mikeslr wrote:Was this discussed in a previous thread?
If not, could you provide some details? How does it differ from an "ordinary" savefolder? How do you set up the symbolic links? To what? What are its potential advantages?
Yes,
http://murga-linux.com/puppy/viewtopic.php?t=95922.
Instead of using a 'mount -o bind' command to make the actual directory containing the savefolder appear at '/initrd/pup_rw', it uses a symbolic link.
Both methods break some existing code because old assumptions become false. The list of broken programs for the 'symbolic link' method is a bit shorter, and they are very specific to puppy. So hopefully it's less likely to bite us in the future.
It's been ported to a few puppies now. The intention of my post was to announce the availability of a port for TahrPup 6.0.
The 'initrd.gz' is a normal TahrPup 6.0 'initrd.gz' but with a patched 'init' script. The 'ydrv_tahr_6.0.sfs' contains patched versions of a few puppy programs to support this implementation.
gyro
Posted: Tue 28 Oct 2014, 10:45
by BarryK
Guys, yes, I announced Tahrpup 6.0 as an official Puppy, after receiving recommendation from 01micko, see my blog:
http://bkhome.org/news/?viewDetailed=00097
...but, note, I have just now edited it.
I had informed Ladislav, the top guy at distrowatch.com, and he replied that he is concerned about the naming of Tahpup, as it is now an official Puppy Linux. So I reworded the heading in my blog as "Puppy Linux 6.0, "Tahrpup" released"
You will notice how Ladislav names each Puppy:
http://distrowatch.com/table.php?distribution=puppy
...you see, he wants a nice consistent naming "Puppy Linux 5.6", "Puppy Linux 5.7", etc.
He thinks that this will avoid confusion.
I have also added some comment in my blog to explain difference from the "Slacko edition".
Hmmm, to keep Ladislav happy, perhaps the next Slacko edition should have a later version number, say "Puppy Linux 6.1, "Slacko" edition"
Anyway, in this Forum thread you can continue to name this pup anyway you want!
Posted: Tue 28 Oct 2014, 11:19
by linux28
Geoffrey wrote:I've compiled xfce and have it running of a fashion, still needs work to get everything working, recompiled glib with the patch that's mentioned,
then compiled the pup-volume-monitor, it threw a few warnings in the compile but it's now working,
no segment faults, thunar filemanager shows drives and desktop also shows them.
pup-volume-monitor??
Posted: Tue 28 Oct 2014, 11:41
by linux28
Geoffrey wrote:I've compiled xfce and have it running of a fashion, still needs work to get everything working, recompiled glib with the patch that's mentioned,
then compiled the pup-volume-monitor, it threw a few warnings in the compile but it's now working,
no segment faults, thunar filemanager shows drives and desktop also shows them.
Make thunar normal share
pup-volume-monitor
share please
Posted: Tue 28 Oct 2014, 13:26
by kimathi
Geoffrey wrote:I've compiled xfce and have it running of a fashion, still needs work to get everything working, recompiled glib with the patch that's mentioned,
then compiled the pup-volume-monitor, it threw a few warnings in the compile but it's now working,
no segment faults, thunar filemanager shows drives and desktop also shows them.
Mind sharing your pet packages for others to use. Maybe have they could be added to quickpet
Posted: Tue 28 Oct 2014, 15:54
by 666philb
thanks barry
6.0
Posted: Tue 28 Oct 2014, 19:29
by sszindian
Tahr-6.0
pupRadio/pupTelly streaming media
Not working from the menu???
>>>---Indian------>
Re: 6.0
Posted: Tue 28 Oct 2014, 19:54
by 666philb
sszindian wrote:Tahr-6.0
pupRadio/pupTelly streaming media
Not working from the menu???
>>>---Indian------>
hi sszindian,
try deleting /root/.pupradio