(old)Puppy Linux Discussion Forum

3f10402b07f920a204d09cce1227168b upupbb-18.05+16.iso

{delta} to be applied to original 18.05.iso

Just ubuntu updates....no bugs squashed

Peabee, once again thank you for the excellent work..this OS is top shelf.
I am about to run an experiment using the upupbb-18.05+16.iso
and swap in a kernel 4.18.16 that I just finished compiling using the kernel-kit

looks promising and then I will swap in a real time kernel and run some heavy software synthesizers and record them.

the other project is to get your Bionicpup to run a LAMP and ZoneMinder cleanly and reliably as I have in Tahr and Xenial.....I attempt with the Puppy Linux - zoneminder combo to provide a solid camera security /network video recorder for the people interested in having such a system, to be able to have options to run completely in RAM or portable on a USB stick or just fast and small on a frugal puppy install....all of it in about 600 megs of RAM....that number competes with anybody's OS doing the same thing,

it works so far really well on a Dell Optiplex 990 with the swapped kernel.

here is a link to it if anyone would like to use it
http://rockedge.org/kernels/data/kernel ... bb.tar.bz2

http://rockedge.org/kernels

rockedge wrote:it works so far really well on a Dell Optiplex 990 with the swapped kernel.

here is a link to it if anyone would like to use it
http://rockedge.org/kernels/data/kernel ... bb.tar.bz2

http://rockedge.org/kernels

Thanks. I've run it in the most recent LxPupSc while chasing a 4.19.0 kernel quirk there. Boots and runs well in that pup with excellent video FPS, CPU and mem use at idle, dmesg cleanliness etc. on my i5 laptop. So far I'm using the 4.9.134 from upupcc on all the ubuntu based pups and derivs and happy with that.

G'day there, I'm getting Grief installing Compiz on this LxPup Bionic Beaver on this Dell Vostro 1500, w/ NVidia GeForce 8600M GT Graphics.

Compiz isn't working, I Checked the Dependencies & then Started Hunting them down thru the Puppy Package Manager & the iNet ( it was worse than what yoU C on the Attached ScreenShot ).

But it was just Too Tedious, so I thought I'd install Synaptic Package Manager 2 Resolve those Dependencies, but alas it has the Same Dependency Headache!

Can Anybody Help me? Please!

;-(K

synaptic will not work correctly if it even runs.

for compiz make sure the devx is loaded might help with missing packages

.

Please consider adding

Simplecom NW601 Wireless USB

How to use Simplecom NW601 Wireless USB? (Solved)

http://murga-linux.com/puppy/viewtopic. ... 29#1008529

No recent Pups have this incuding,

UPup Bionic Beaver
Bionicpup64
32-bit UPup Cosmic Cuttlefish
X-Slacko Slim

Page one Murga.

http://murga-linux.com/puppy/viewtopic.php?t=114560

::

perdido supplied these with help from Semme.

Both work after a reboot.
However I prefer for banking to boot a pristine Puppy,
add my stored bookmarks, and usually Slimjet and off I go.

http://ibm-pc.org/puppy/rtl8812au_rtl88 ... 4.1.48.pet

http://ibm-pc.org/puppy/rtl8812au-5.1.5_k4.1.48.pet

:::::

Linux Drivers from Simplecom site:

https://www.simplecom.com.au/media/link ... _linux.zip


Many thanks...Chris.

cthisbear wrote:Please consider adding

Simplecom NW601 Wireless USB

How to use Simplecom NW601 Wireless USB? (Solved)

http://murga-linux.com/puppy/viewtopic. ... 29#1008529

No recent Pups have this incuding,

UPup Bionic Beaver
Bionicpup64
32-bit UPup Cosmic Cuttlefish
X-Slacko Slim

Page one Murga.

http://murga-linux.com/puppy/viewtopic.php?t=114560

::

perdido supplied these with help from Semme.

Both work after a reboot.
However I prefer for banking to boot a pristine Puppy,
add my stored bookmarks, and usually Slimjet and off I go.

http://ibm-pc.org/puppy/rtl8812au_rtl88 ... 4.1.48.pet

http://ibm-pc.org/puppy/rtl8812au-5.1.5_k4.1.48.pet

:::::

Linux Drivers from Simplecom site:

https://www.simplecom.com.au/media/link ... _linux.zip


Many thanks...Chris.

Compiled for Upup Bionic Beaver kernel 4.9.96 located here
http://www.murga-linux.com/puppy/viewto ... 19#1008619

.

.

This driver needs to get incorporated into the kernel to be viable.

At the moment it falls into the same category as ndiswrapper and nvidia drivers.

I have made a repo for such drivers:
https://sourceforge.net/projects/zestyp ... c/drivers/
which I will link to post #3

and the firmware needs to find its way into the sfs maintained by @gyro
http://www.fishprogs.software/puppy/firmware-sfs/

perdido:

Tested late tonight 10.15pm Sydney.

Error Message:

rtl18812au-5.1.5_k4.9.96-pet is named sda4
inside the pet file. Will not install it

Chris.

cthisbear wrote:perdido:

Tested late tonight 10.15pm Sydney.

Error Message:

rtl18812au-5.1.5_k4.9.96-pet is named sda4
inside the pet file. Will not install it

Chris.

fixed
http://murga-linux.com/puppy/viewtopic. ... 79#1008779

.

I'm Sorry People Compiz Still won't work Even after Loading DevX & a Fresh Full install, Curiously I'm getting the same Missing Dependencies w/ VLC, CompizConfig Settings Manager & Compiz as Confirmed by the ScreenShot.

I Used 2 be Able 2 install it in Dingo ( ie. Series 4 Pups ) without as many Problems, But I'm Stuck, Please Help...

;-\K

Hi Max,

Your's is a python problem, and all I know about python is it bites me.

I suspect the Puppy Community will hate me for mentioning this. Earlier you thought about installing synaptic but were properly advised against it.

As you probably know, synaptic is a front-end (Gui) for apt-get. sc0ttman has been working on a package installer similar to apt-get. It may help in your quest, or drive you further toward distraction. The thread about it is here: http://murga-linux.com/puppy/viewtopic. ... 531#985531

" fixed, thanks for testing "

:::::::::

No problems mate....

I was just worried my Magnetic Personality was interfering
in the installation.
Semme would know about that.

Chris.

...all I know about python is it bites me.

Almost all python dependent programs had caused trouble when trying to use them. Wherever possible I'm continue to avoid python software.

There should be a official package for each official Puppy Linux containing all the python stuff needed to run all python programs possible.

Would save a lot of trouble/hassle, but I assume it could be huge?

perdido:

Sorry mate.

It did not pick up the wireless in Frisbee,
Simple Network wizard or
or the regulay Network Wizard.

Thanks mate ....Chris.

cthisbear wrote:perdido:

Sorry mate.

It did not pick up the wireless in Frisbee,
Simple Network wizard or
or the regulay Network Wizard.

Thanks mate ....Chris.

Fixed and working Realtek RTL8812AU-8821AU Wireless driver for
Simplecom NW601 Wireless USB ID obda:a811
for Upup Bionic 18.05 kernel 4.9.96
Download pet here ------>http://www.murga-linux.com/puppy/viewto ... 19#1008619

.

94c6d6bd33cb9e8f96bfec521795f458 upupbb-18.05+17.iso

{delta}

Just ubuntu updates....no bugs squashed

Hi Guys

Hi PeeBee

Am really enjoying Bionic

Have just updated.

When I click on Choose an sfs from the Official Repo., The Package Manager crashes.

Also the link on the Package Manager Introduction Webpage is button is dead.

Have disabled my Save Folder and rebooted. Problem persists.

Any ideas ?

This absolutely flies on my AMD Athlon(tm) 64 X2 Dual Core Processor 3800+,2gb ram box.
Pmcputemp works ootb too.

Thanks peebee