Posted: Tue 11 Oct 2016, 18:16
Make sure you run Tahr updates before anything else, then grab'n load the devx in Quickpet, Useful pets.
READ-ONLY Archive
https://oldforum.puppylinux.com/
Code: Select all
# From https://wiki.archlinux.org/index.php/Wacom_Tablet
ACTION!="add|change", GOTO="wacom_end"
# Match all wacom tablets with a serial ID starting with WACf or FUJ*
ATTRS{id}=="WACf*" ENV{NAME}="Serial Wacom Tablet", ENV{ID_INPUT}="1", ENV{ID_INPUT_TABLET}="1"
ATTRS{id}=="FUJ*" ENV{NAME}="Serial Wacom Tablet", ENV{ID_INPUT}="1", ENV{ID_INPUT_TABLET}="1"
# LABEL="wacom_end"
KERNEL!="event[0-9]*", GOTO="wacom_end"
# Port specific link for users of multiple tablets of the same type.
# The ID_PATH variable is set by the "path_id" script in an earlier rule file.
ATTRS{idVendor}=="056a", ENV{ID_PATH}=="?*", SYMLINK="input/by-path/$env{ID_PATH}-wacom"
# Multiple interface support for stylus and touch devices.
DRIVERS=="wacom", ATTRS{bInterfaceNumber}=="00", ENV{WACOM_TYPE}="stylus"
DRIVERS=="wacom", ATTRS{bInterfaceNumber}=="01", ENV{WACOM_TYPE}="touch"
# Type-named links for multiple tablets. If you want to use multiple
# tablets of the _same_ type, you will probably need to use the links
# from /dev/input/by-path to identify which is plugged into what usb
# port. For different tablet types though, just pick your links from
# the list below.
#
# We override SYMLINK for tabletpc devices because the by-path link
# is not required with such devices, there will only ever be one.
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0000", SYMLINK+="input/tablet-penpartner"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0003", SYMLINK+="input/tablet-cintiq_partner"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0010", SYMLINK+="input/tablet-graphire"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0011", SYMLINK+="input/tablet-graphire2-4x5"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0012", SYMLINK+="input/tablet-graphire2-5x7"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0013", SYMLINK+="input/tablet-graphire3"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0014", SYMLINK+="input/tablet-graphire3-6x8"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0015", SYMLINK+="input/tablet-graphire4-4x5"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0016", SYMLINK+="input/tablet-graphire4-6x8"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0017", SYMLINK+="input/tablet-bamboofun-4x5"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0018", SYMLINK+="input/tablet-bamboofun-6x8"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0019", SYMLINK+="input/tablet-bamboo1-medium"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0020", SYMLINK+="input/tablet-intuos-4x5"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0021", SYMLINK+="input/tablet-intuos-6x8"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0022", SYMLINK+="input/tablet-intuos-9x12"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0023", SYMLINK+="input/tablet-intuos-12x12"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0024", SYMLINK+="input/tablet-intuos-12x18"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0030", SYMLINK+="input/tablet-pl400"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0031", SYMLINK+="input/tablet-pl500"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0032", SYMLINK+="input/tablet-pl600"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0033", SYMLINK+="input/tablet-pl600sx"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0034", SYMLINK+="input/tablet-pl550"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0035", SYMLINK+="input/tablet-pl800"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0037", SYMLINK+="input/tablet-pl700"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0038", SYMLINK+="input/tablet-pl510"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0039", SYMLINK+="input/tablet-dtu710"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="003f", SYMLINK+="input/tablet-cintiq21ux"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0041", SYMLINK+="input/tablet-intuos2-4x5"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0042", SYMLINK+="input/tablet-intuos2-6x8"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0043", SYMLINK+="input/tablet-intuos2-9x12"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0044", SYMLINK+="input/tablet-intuos2-12x12"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0045", SYMLINK+="input/tablet-intuos2-12x18"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0047", SYMLINK+="input/tablet-intuos2-6x8a"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0060", SYMLINK+="input/tablet-volito"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0061", SYMLINK+="input/tablet-penstation2"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0062", SYMLINK+="input/tablet-volito2-4x5"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0063", SYMLINK+="input/tablet-volito2-2x3"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0064", SYMLINK+="input/tablet-penpartner2"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0065", SYMLINK+="input/tablet-bamboo"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0069", SYMLINK+="input/tablet-bamboo1"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0081", SYMLINK+="input/tablet-graphire_bt-6x8"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0090", SYMLINK="input/tablet-tpc90"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0093", SYMLINK="input/tablet-tpc93-$env{WACOM_TYPE}"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="009a", SYMLINK="input/tablet-tpc9a-$env{WACOM_TYPE}"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="00b0", SYMLINK+="input/tablet-intuos3-4x5"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="00b1", SYMLINK+="input/tablet-intuos3-6x8"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="00b2", SYMLINK+="input/tablet-intuos3-9x12"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="00b3", SYMLINK+="input/tablet-intuos3-12x12"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="00b4", SYMLINK+="input/tablet-intuos3-12x19"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="00b5", SYMLINK+="input/tablet-intuos3-6x11"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="00b7", SYMLINK+="input/tablet-intuos3-4x6"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="00b8", SYMLINK+="input/tablet-intuos4-4x6"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="00b9", SYMLINK+="input/tablet-intuos4-6x9"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="00ba", SYMLINK+="input/tablet-intuos4-8x13"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="00bb", SYMLINK+="input/tablet-intuos4-12x19"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="00c0", SYMLINK+="input/tablet-dtf521"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="00c4", SYMLINK+="input/tablet-dtf720"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="00c5", SYMLINK+="input/tablet-cintiq20wsx"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="00c6", SYMLINK+="input/tablet-cintiq12wx"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="00c7", ENV{WACOM_TYPE}!="touch", SYMLINK+="input/tablet-dtu1931"
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0302", SYMLINK+="input/tablet-intuos-pts-4x6"
# Convenience links for the common case of a single tablet. We could do just this:
#ATTRS{idVendor}=="056a", SYMLINK+="input/wacom-$env{WACOM_TYPE}"
# but for legacy reasons, we keep the input/wacom link as the generic stylus device.
ATTRS{idVendor}=="056a", ENV{WACOM_TYPE}!="touch", SYMLINK+="input/wacom"
ATTRS{idVendor}=="056a", ENV{WACOM_TYPE}=="touch", SYMLINK+="input/wacom-touch"
# Check and repossess the device if a module other than the wacom one
# is already bound to it.
#
# We probably don't need this one in the Real World anymore ...
# See the old wacom-tools package if we actually do need to resurrect the
# check_driver script for this again.
#ATTRS{idVendor}=="056a", ACTION=="add", RUN+="check_driver wacom $devpath $env{ID_BUS}"
LABEL="wacom_end"
Code: Select all
ATTRS{idVendor}=="056a", ATTRS{idProduct}=="0302", SYMLINK+="input/tablet-intuos-pts-4x6"
Code: Select all
#barry Kauler 2011
#pre-constructed xorg.conf, for use by /usr/sbin/xorgwizard-automatic
#110627 working on mageia1 build, this needs fixing.
#111029 Terryphi reported 1cm screen displacement, changed vert freq range from 56-76 to 59-76.
#120329 more placemarkers for xorgwizard-automatic script.
#121013 change depth from 16 to 24. note, some arm boards need 16.
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# Load "synaptics" #loadsynaptics
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
# Load "freetype"
# This loads xtrap extension, used by xrandr
# Load "xtrap"
# This loads the GLX module (if present). xorg 7.4/5, need explicit disable to disable... change "Disable" to "Load" if reqd...
# Disable "glx" #LOADGLX
# This loads dri module (if present). 7.4 loads it by default, have to disable... change "Disable" to "Load" if reqd...
# Disable "dri" #LOADDRI
EndSection
# **********************************************************************
# Files section. This allows default font paths to be set
# **********************************************************************
Section "Files"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#FontPath "/usr/share/fonts/X11/misc/"
#FontPath "/usr/share/fonts/liberation/"
FontPath "/usr/share/X11/fonts/misc/"
FontPath "/usr/share/X11/fonts/Type1/"
FontPath "/usr/share/X11/fonts/TTF/"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Enables mode switching with xrandr
# There is a report that this can cause Xorg not to work on some
# video hardware, so default is commented-out...
# but i want to use it in xorgwizard so leave on...
Option "RandR" "on"
# With this, Xorg won't talk to HAL to add evdev devices and you'll be back
# with the old Xorg behavior (pre-7.4)...
Option "AutoAddDevices" "false"
# For no-Hal, kirk also suggests this...
# Option "AllowMouseOpenFail" "true"
# Xorg 7.4, Ubuntu Jaunty, CTRL-ALT-BACKSPACE is disabled by default...
Option "DontZap" "false"
EndSection
Section "ServerLayout"
# InputDevice "Synaptics Mouse" "AlwaysCore" #serverlayoutsynaptics
Identifier "X.org Configured"
InputDevice "stylus" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
# InputDevice "pad" # For Intuos3/CintiqV5/Graphire4/Bamboo tablets
# InputDevice "cursor" "SendCoreEvents" # For non-LCD tablets only
# InputDevice "touch" "SendCoreEvents" # few TabletPCs support this
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "stylus"
InputDevice "eraser"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc102" #xkbmodel0
Option "XkbLayout" "us" #xkeymap0
#Option "XkbVariant" "" #xkbvariant0
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2" #mouse0protocol
Option "Device" "/dev/mouse"
#Option "Emulate3Buttons"
#Option "Emulate3Timeout" "50"
Option "ZAxisMapping" "4 5" #scrollwheel
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 35-81
VertRefresh 59-76
#UseModes "Modes0" #monitor0usemodes
Option "PreferredMode" "1600x900" #monitor0prefmode
EndSection
Section "Modes"
Identifier "Modes0"
#modes0modeline0
EndSection
#110627 remove...
##server can find BusID automatically, comment out...
#Section "Device"
# Identifier "Card0"
# Driver "vesa" #card0driver
# VendorName "Unknown Vendor"
# BoardName "Unknown Board"
## BusID "PCI:0:2:0" #card0busid
#EndSection
Section "Screen"
Identifier "Screen0"
# Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
#Option "metamodes" "1280x800_60 +0+0" #METAMODES_0
Subsection "Display"
Depth 24
Modes "1600x900" #screen0modes
EndSubsection
EndSection
#PuppyHardwareProfile=ATI_ATOMBIOSSA300_SA350
########################################
# Wacom
########################################
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom" # USB ONLY
Option "Type" "stylus"
Option "USB" "on" # USB ONLY
Option "GrabDevice" "1"
Option "Mode" "Absolute"
Option "AlwaysCore" "on"
Option "Speed" "1.3"
Option "Threshold" "5"
Option "CursorProx" "5"
## Option "Speed" "5"
## # Option "ForceDevice" "ISDV4" # Serial Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom" # USB ONLY
Option "Type" "eraser"
Option "USB" "on" # USB ONLY
Option "GrabDevice" "1"
Option "Mode" "Absolute"
EndSection
#Section "InputDevice"
# Identifier "touch"
# Driver "wacom"
## Option "Device" "/dev/input/wacom" # USB ONLY
# Option "Type" "touch"
# Option "USB" "on" # USB ONLY
# Option "GrabDevice" "1"
#EndSection
#Section "InputDevice"
# Identifier "pad"
# Driver "wacom"
## Option "Device" "/dev/input/wacom" # USB ONLY
# Option "Type" "pad"
# Option "USB" "on" # USB ONLY
# Option "GrabDevice" "1"
## Option "SendCoreEvents" "false"
# Option "ButtonsOnly" "on"
# Option "Button9" "2"
# Option "Button13" "3"
# Option "Mode" "Absolute"
#EndSection
#Section "InputDevice"
# Identifier "cursor"
# Driver "wacom"
# Option "Device" "/dev/input/wacom" # USB ONLY
# Option "Type" "cursor"
# Option "USB" "on" # USB ONLY
#EndSection
Code: Select all
#from kernel 2.6.35 and later the "SendCoreEvents" after InputDevice is no longer required
InputDevice "stylus"
InputDevice "eraser"
InputDevice "cursor"
InputDevice "pad"
Code: Select all
Section "ServerLayout"
# InputDevice "Synaptics Mouse" "AlwaysCore" #serverlayoutsynaptics
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
#from kernel 2.6.35 and later the "SendCoreEvents" after InputDevice is no longer required
InputDevice "stylus"
InputDevice "eraser"
InputDevice "cursor"
InputDevice "pad"
EndSection
Code: Select all
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc102" #xkbmodel0
Option "XkbLayout" "be" #xkeymap0
#Option "XkbVariant" "" #xkbvariant0
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2" #mouse0protocol
Option "Device" "/dev/mouse"
#Option "Emulate3Buttons"
#Option "Emulate3Timeout" "50"
Option "ZAxisMapping" "4 5" #scrollwheel
EndSection
Code: Select all
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "USB" "on"
Option "GrabDevice" "1"
# Option "Mode" "Absolute"
Option "Mode" "Relative"
# Option "AlwaysCore" "on"
Option "Speed" "1.0"
Option "Threshold" "5"
Option "CursorProx" "5"
# Option "Speed" "5"
# # Option "ForceDevice" "ISDV4" # Serial Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "USB" "on"
Option "GrabDevice" "1"
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom" # USB ONLY
Option "Type" "cursor"
Option "USB" "on" # USB ONLY
Option "Mode" "Relative"
Option "GrabDevice" "1"
Option "CursorProx" "5"
Option "Speed" "1.0"
EndSection
Section "InputDevice"
Identifier "pad"
Driver "wacom"
Option "Device" "/dev/input/wacom" # USB ONLY
Option "Type" "pad"
Option "USB" "on" # USB ONLY
Option "GrabDevice" "1"
EndSection
Code: Select all
root# modprobe wacom
root# lsmod | grep wacom
wacom 42600 0
root#
Code: Select all
root# xsetwacom --list devices
stylus id: 8 type: STYLUS
eraser id: 9 type: ERASER
cursor id: 10 type: CURSOR
pad id: 11 type: PAD
root#
Code: Select all
# Option "Mode" "Absolute"
Option "Mode" "Relative"
Code: Select all
Option "Threshold" "5"
Option "CursorProx" "5"
Hi don570,don570 wrote:...
I have noticed that wacom.ko is not inside some recent distros using the 4.9 kernel. This seems to be a bug.
If you knew how to change the recipe then it might work???/initrd/mnt/tmpfs/tmp/input-wacom-0.41.0/4.5/Makefile:14: *** You requested to build wacom with configure, but wacom is configured as built-in in your kernel config. Stop.
Makefile recipe for target '_module_/initrd/mnt/tmpfs/tmp/input-wacom-0.41.0/4.5' failed
I miss time these days to try to give an exhaustive answer.don570 wrote:...I tried modifying my xorg.conf file and all I got was a frozen screen.