Page 3 of 24

Posted: Sat 29 May 2010, 15:06
by Flapdoodle
I uninstalled WINE 1.1.43 on my Turbopup Xtreme 1.0 installed on flash, then installed the WINE 1.2rc1.

It complained a few dependencies were not there, but it runs great in spite of that. (WINE 1.1.43 also made that complaint)

Fixed where a few minor problems where the cursor needed to be on a line lower than it should be to click on a menu item.

Firefox portable, and YahElite work fine as well as all the other apps in my portable collection.

This has been my everyday machine for a while now.

Posted: Mon 31 May 2010, 22:23
by abushcrafter
Wine Tricks is missing :?.

Posted: Tue 01 Jun 2010, 02:05
by green_dome
abushcrafter wrote:Wine Tricks is missing :?.
'winetricks' is in /usr/sbin

Posted: Tue 01 Jun 2010, 09:44
by vovchik
Dear green_dome and Liboicl,

I see that 1.2-rc2 is out. Apparently, there is some fix for X11 in that system-wide Xft settings will be recognized and override registry entries. I hope this fix takes care of the ugly font problem.

With kind regards,
vovchik

Posted: Tue 01 Jun 2010, 18:42
by abushcrafter
abushcrafter wrote:Wine Tricks is missing :?.
Oops bad download.

Wine 1.2-rc2

Posted: Wed 02 Jun 2010, 00:46
by green_dome
Edit: (2010.June.6 | time 19:27:00) added the login details for <puppylinux.asia/>

-------------------------------

my attempt at compiling wine 1.2-rc2

wine-1.2-rc2-i486.pet (release 1) - mirror 1
wine_DEV-1.2-rc2-i486.pet (release 1) (development package) - mirror 1
wine_DOC-1.2-rc2-i486.pet (release 1) (documentation package) - mirror 1
wine-1.2-rc2-i486-sfs3.sfs (release 1) - mirror 1
wine-1.2-rc2-i486-sfs4.sfs (release 1) - mirror 1

-------------------------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
I specifically used the files:
puppies-431.1-main-Xserver.iso
devx_430.sfs

puppies-431.1-main-Xserver.iso - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

devx_430.sfs - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

-------------------------------

Files located at <http://puppylinux.asia/> require a login.
(Username=puppy) (Password=linux)

I installed these packages before compiling:

esound-0.2.41-i486.pet
<http://puppylinux.asia/members/T/486_pe ... 1-i486.pet>

esound_DEV-0.2.41-i486.pet
<http://puppylinux.asia/members/T/486_pe ... 1-i486.pet>

fontconfig-2.7.1-i486-pup4.pet
<http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet>

fontconfig_DEV-2.7.1-i486-pup4.pet
<http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet>

gnutls+deps-2.6.6-i486.pet
<http://puppylinux.asia/members/T/444/gn ... 6-i486.pet>

gnutls+deps_DEV-2.6.6-i486.pet
<http://puppylinux.asia/members/T/444/gn ... 6-i486.pet>

jack-audio-connection-kit-0.116.1-i486.pet
<http://puppylinux.asia/members/T/444/ja ... 1-i486.pet>

jack-audio-connection-kit_DEV-0.116.1-i486.pet
<http://puppylinux.asia/members/T/444/ja ... 1-i486.pet>

openldap-2.4.13-i486.pet
<http://puppylinux.asia/members/T/444/op ... 3-i486.pet>

openldap_DEV-2.4.13-i486.pet
<http://puppylinux.asia/members/T/444/op ... 3-i486.pet>

xorg_xorg_full_dri-7.3.pet
<ftp://distro.ibiblio.org/pub/linux/dist ... ri-7.3.pet>

xorg_xorg_full_dri_DEV-7.3.pet
<ftp://distro.ibiblio.org/pub/linux/dist ... EV-7.3.pet>

-------------------------------

When compiling, I used

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x
Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' provided by forum member 'technosaurus'. The only changes I made to the contents of that file were to delete the file 'Wine_regedit.desktop'. That appears to be a duplicate file. I also deleted the file 'winetricks' and replaced it with the updated one.

For help with Gecko, look here

I use the console to install packages from winetricks. For help with this I use

Code: Select all

winetricks -h
[source]

my graphics card is a Nvidia GeForce 8400GS, so I install the 'NVIDIA-190.42-k2.6.30.5-1.pet' from this post.

Posted: Wed 02 Jun 2010, 08:28
by vovchik
Dear green_dome,

Thanks. RC2 works like a charm, and does solve the font problem about which I complained earlier.

With kind regards,
vovchik

Posted: Fri 11 Jun 2010, 20:55
by vovchik
Dear green_dome,

I would love to try out a new pet with Wine v. 1.2-rc3, which just came out. There are many bug fixes in this version (http://www.winehq.org/announce/1.2-rc3). Any chance of a new version?

With thanks in advance and kind regards,
vovchik

Wine 1.2-rc3

Posted: Sun 13 Jun 2010, 00:29
by green_dome
my attempt at compiling wine 1.2-rc3

wine-1.2-rc3-i486.pet (release 1) - mirror 1
wine_DEV-1.2-rc3-i486.pet (release 1) (development package) - mirror 1
wine_DOC-1.2-rc3-i486.pet (release 1) (documentation package) - mirror 1
wine-1.2-rc3-i486-sfs3.sfs (release 1) - mirror 1
wine-1.2-rc3-i486-sfs4.sfs (release 1) - mirror 1

-------------------------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
I specifically used the files:
puppies-431.1-main-Xserver.iso
devx_430.sfs

puppies-431.1-main-Xserver.iso - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

devx_430.sfs - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

-------------------------------

Files located at <http://puppylinux.asia/> require a login.
(Username=puppy) (Password=linux)

I installed these packages before compiling:

esound-0.2.41-i486.pet
<http://puppylinux.asia/members/T/486_pe ... 1-i486.pet>

esound_DEV-0.2.41-i486.pet
<http://puppylinux.asia/members/T/486_pe ... 1-i486.pet>

fontconfig-2.7.1-i486-pup4.pet
<http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet>

fontconfig_DEV-2.7.1-i486-pup4.pet
<http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet>

gnutls+deps-2.6.6-i486.pet
<http://puppylinux.asia/members/T/444/gn ... 6-i486.pet>

gnutls+deps_DEV-2.6.6-i486.pet
<http://puppylinux.asia/members/T/444/gn ... 6-i486.pet>

jack-audio-connection-kit-0.116.1-i486.pet
<http://puppylinux.asia/members/T/444/ja ... 1-i486.pet>

jack-audio-connection-kit_DEV-0.116.1-i486.pet
<http://puppylinux.asia/members/T/444/ja ... 1-i486.pet>

openldap-2.4.13-i486.pet
<http://puppylinux.asia/members/T/444/op ... 3-i486.pet>

openldap_DEV-2.4.13-i486.pet
<http://puppylinux.asia/members/T/444/op ... 3-i486.pet>

xorg_xorg_full_dri-7.3.pet
<ftp://distro.ibiblio.org/pub/linux/dist ... ri-7.3.pet>

xorg_xorg_full_dri_DEV-7.3.pet
<ftp://distro.ibiblio.org/pub/linux/dist ... EV-7.3.pet>

-------------------------------

When compiling, I used

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x
Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' provided by forum member 'technosaurus'. The only changes I made to the contents of that file were to delete the file 'Wine_regedit.desktop'. That appears to be a duplicate file. I also deleted the file 'winetricks' and replaced it with the updated one.

For help with Gecko, look here

I use the console to install packages from winetricks. For help with this I use

Code: Select all

winetricks -h
[source]

my graphics card is a Nvidia GeForce 8400GS, so I install the 'NVIDIA-190.42-k2.6.30.5-1.pet' from this post.

Posted: Sun 13 Jun 2010, 08:57
by vovchik
Dear green_dome,

Perfect. Thanks again....

With kind regards,
vovchik

Posted: Sun 13 Jun 2010, 19:24
by nooby
Great thanks guys. I make a book mark to this thread.

I have Wine 1.1.40 in the Quirky 1.00 I use. It works well with the few programs that I have tested.

I fail to understand what you guys write about now but I trust I can make use of these things later so keep it coming. :)

Wine 1.2-rc4

Posted: Sat 19 Jun 2010, 04:00
by green_dome
my attempt at compiling wine 1.2-rc4

wine-1.2-rc4-i486.pet (release 1) - [link 1]
wine_DEV-1.2-rc4-i486.pet (release 1) (development package) - [link 1]
wine_DOC-1.2-rc4-i486.pet (release 1) (documentation package) - [link 1]
wine-1.2-rc4-i486-sfs3.sfs (release 1) - [link 1]
wine-1.2-rc4-i486-sfs4.sfs (release 1) - [link 1]

-------------------------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
I specifically used the files:
puppies-431.1-main-Xserver.iso
devx_430.sfs

puppies-431.1-main-Xserver.iso - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

devx_430.sfs - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

-------------------------------

Files located at <http://puppylinux.asia/> require a login.
(Username=puppy) (Password=linux)

I installed these packages before compiling:

esound-0.2.41-i486.pet
<http://puppylinux.asia/members/T/486_pe ... 1-i486.pet>

esound_DEV-0.2.41-i486.pet
<http://puppylinux.asia/members/T/486_pe ... 1-i486.pet>

fontconfig-2.7.1-i486-pup4.pet
<http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet>

fontconfig_DEV-2.7.1-i486-pup4.pet
<http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet>

gnutls+deps-2.6.6-i486.pet
<http://puppylinux.asia/members/T/444/gn ... 6-i486.pet>

gnutls+deps_DEV-2.6.6-i486.pet
<http://puppylinux.asia/members/T/444/gn ... 6-i486.pet>

jack-audio-connection-kit-0.116.1-i486.pet
<http://puppylinux.asia/members/T/444/ja ... 1-i486.pet>

jack-audio-connection-kit_DEV-0.116.1-i486.pet
<http://puppylinux.asia/members/T/444/ja ... 1-i486.pet>

openldap-2.4.13-i486.pet
<http://puppylinux.asia/members/T/444/op ... 3-i486.pet>

openldap_DEV-2.4.13-i486.pet
<http://puppylinux.asia/members/T/444/op ... 3-i486.pet>

xorg_xorg_full_dri-7.3.pet
<ftp://distro.ibiblio.org/pub/linux/dist ... ri-7.3.pet>

xorg_xorg_full_dri_DEV-7.3.pet
<ftp://distro.ibiblio.org/pub/linux/dist ... EV-7.3.pet>

-------------------------------

When compiling, I used

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x
Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' provided by forum member 'technosaurus'. The only changes I made to the contents of that file were to delete the file 'Wine_regedit.desktop'. That appears to be a duplicate file. I also deleted the file 'winetricks' and replaced it with the updated one.

For help with Gecko, look here

I use the console to install packages from winetricks. For help with this I use

Code: Select all

winetricks -h
[source]

my graphics card is a Nvidia GeForce 8400GS, so I install the 'NVIDIA-190.42-k2.6.30.5-1.pet' from this post.

Posted: Sun 20 Jun 2010, 08:34
by vovchik
Dear green_dome,

Works great in 3.x and 4.x. Many thanks.

With kind regards,
vovchik

Posted: Sat 26 Jun 2010, 12:32
by vovchik
Dear green_dome,

I just read that RC5 has been released. Any chance that you might do a pet for us?

With thanks in advance and kind regards,
vovchik

Wine 1.2-rc5

Posted: Mon 28 Jun 2010, 02:03
by green_dome
my attempt at compiling wine 1.2-rc5

wine-1.2-rc5-i486.pet (release 1) - [link 1]
wine_DEV-1.2-rc5-i486.pet (release 1) (development package) - [link 1]
wine_DOC-1.2-rc5-i486.pet (release 1) (documentation package) - [link 1]
wine-1.2-rc5-i486-sfs3.sfs (release 1) - [link 1]
wine-1.2-rc5-i486-sfs4.sfs (release 1) - [link 1]

-------------------------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
I specifically used the files:
puppies-431.1-main-Xserver.iso
devx_430.sfs

puppies-431.1-main-Xserver.iso - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

devx_430.sfs - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

-------------------------------

Files located at <http://puppylinux.asia/> require a login.
(Username=puppy) (Password=linux)

I installed these packages before compiling:

esound-0.2.41-i486.pet
<http://puppylinux.asia/members/T/486_pe ... 1-i486.pet>

esound_DEV-0.2.41-i486.pet
<http://puppylinux.asia/members/T/486_pe ... 1-i486.pet>

fontconfig-2.7.1-i486-pup4.pet
<http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet>

fontconfig_DEV-2.7.1-i486-pup4.pet
<http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet>

gnutls+deps-2.6.6-i486.pet
<http://puppylinux.asia/members/T/444/gn ... 6-i486.pet>

gnutls+deps_DEV-2.6.6-i486.pet
<http://puppylinux.asia/members/T/444/gn ... 6-i486.pet>

jack-audio-connection-kit-0.116.1-i486.pet
<http://puppylinux.asia/members/T/444/ja ... 1-i486.pet>

jack-audio-connection-kit_DEV-0.116.1-i486.pet
<http://puppylinux.asia/members/T/444/ja ... 1-i486.pet>

openldap-2.4.13-i486.pet
<http://puppylinux.asia/members/T/444/op ... 3-i486.pet>

openldap_DEV-2.4.13-i486.pet
<http://puppylinux.asia/members/T/444/op ... 3-i486.pet>

xorg_xorg_full_dri-7.3.pet
<ftp://distro.ibiblio.org/pub/linux/dist ... ri-7.3.pet>

xorg_xorg_full_dri_DEV-7.3.pet
<ftp://distro.ibiblio.org/pub/linux/dist ... EV-7.3.pet>

-------------------------------

When compiling, I used

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x
Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' provided by forum member 'technosaurus'. The only changes I made to the contents of that file were to delete the file 'Wine_regedit.desktop'. That appears to be a duplicate file. I also deleted the file 'winetricks' and replaced it with the updated one.

For help with Gecko, look here

I use the console to install packages from winetricks. For help with this I use

Code: Select all

winetricks -h
[source]

my graphics card is a Nvidia GeForce 8400GS, so I install the 'NVIDIA-190.42-k2.6.30.5-1.pet' from this post.

Posted: Mon 28 Jun 2010, 17:59
by vovchik
Dear green_dome,

Tested on 4.x and 3.x. Works very nicely. My thanks, as usual.

With kind regards,
vovchik

Posted: Mon 28 Jun 2010, 23:06
by bones01
Thanks for making this available. Using 1.2-rc4 as .sfs on Quirky 1.00 and all seems good.

Although, if I could make the Configuration box stop opening right at the top of the screen, that would be great. But that's a different issue.

Bones

You the man!

Posted: Tue 29 Jun 2010, 06:27
by bigpup
green_dome,

Not much to say but thanks. Your Wine pets just work. This is my bookmark for the best in Wine pets. Thank you!!!!

Posted: Wed 30 Jun 2010, 01:01
by jamesbond
green_dome, thanks. Your sfs (1.2-rc5) works fine in Fatdog64 with 32-bit libs enabled. It's now in the official FD64 repository.

cheers!

Posted: Fri 02 Jul 2010, 18:41
by vovchik
Dear green_dome,

Sorry to trouble you again but we now have 1.2RC6 (http://www.winehq.org/announce/1.2-rc6).

With thanks in advance and kind regards,
vovchik