Page 3 of 10
Posted: Thu 15 Sep 2011, 18:00
by rcrsn51
Deleted.
Re: Yet Another Samba Share Mounter
Posted: Fri 17 Feb 2012, 20:50
by keith_moon
I can't download the pet. Is the download link still valid?
Posted: Fri 17 Feb 2012, 21:32
by Makoto
It's hosted locally on the forum, so, yes, the link should still be valid. However, there's currently an issue or two with the forum (you may have noticed 'garbage' appearing at the top of a page or two, for example), that appears to be interfering with things like the post attachment above. Hopefully, it'll all be sorted, soon.
Posted: Sun 19 Feb 2012, 17:42
by sebus
It also works fine on Fatdog64, thanks
sebus
Posted: Tue 10 Jul 2012, 01:58
by rcrsn51
YASSM v2.2 is posted on Page 1.
Posted: Tue 10 Jul 2012, 03:36
by Geoffrey
YASSM v2.2 don't run in Saluki, I tried YASSM v2.1 and it works fine, I get this message with v2.2
Posted: Tue 10 Jul 2012, 10:45
by rcrsn51
Please type the command "iproute" and report the results.
Posted: Tue 10 Jul 2012, 13:58
by Geoffrey
rcrsn51 wrote:Please type the command "iproute" and report the results.
Code: Select all
# iproute
default via 10.1.1.1 dev eth0 metric 202
10.0.0.0/8 dev eth0 src 10.1.1.11 metric 202
127.0.0.0/8 dev lo
Posted: Tue 10 Jul 2012, 14:32
by rcrsn51
Thanks. What is the IP address of the server you are looking for?
Now try:
Does this find the server? (You may have to kill this command.) If not, use
or
Posted: Tue 10 Jul 2012, 15:09
by Geoffrey
rcrsn51 wrote:Thanks. What is the IP address of the server you are looking for?
I have 3 nas units ip 10.1.1.2, 10.1.1.3, 10.1.1.7
only the 10.1.1.3 is running to test with
Code: Select all
# nbtscan -q 10.0.0.0/8
# nbtscan -q 10.0.0.0/16
# nbtscan -q 10.1.1.0-254
10.1.1.3 REPOTEC <server> REPOTEC 00-00-00-00-00-00
using fping
Code: Select all
LAN IPs found:
10.1.1.1
10.1.1.3
10.1.1.8
Local IP: 10.1.1.11
Posted: Tue 10 Jul 2012, 15:36
by rcrsn51
Posted: Tue 10 Jul 2012, 16:13
by Geoffrey
rcrsn51 wrote:Thanks. One more:
That gave no result
Posted: Tue 10 Jul 2012, 16:36
by rcrsn51
Thanks. If you run Pnethood from another Puppy (Saluki doesn't have it) can it find your NAS boxes?
Posted: Wed 11 Jul 2012, 03:27
by Geoffrey
rcrsn51 wrote:Thanks. If you run Pnethood from another Puppy (Saluki doesn't have it) can it find your NAS boxes?
With Pnethood I've never had a problem with other puppy's using a network scan of 3 seconds, Saluki has pnethood but I need to adjust the network scan to 6 seconds then it finds the servers.
I have had this problem with lameSMBxplorer, I was never was able to get it to function correctly, it also had issues with ip's in the 10.1.1.0 range and netmask 255.0.0.0, this was discussed here
http://murga-linux.com/puppy/viewtopic. ... 033#440033.
Don't pull your hair out over it, your version 2.1 works fine and it's easier for me to set the shares manually, the only time it's a pain is if someone arrives with a device that I wish to access, but a quick fping scan will find any new ip's.
Posted: Wed 11 Jul 2012, 04:46
by rcrsn51
Thank you for this testing - it has been extremely valuable. I had made some incorrect assumptions about how people set up home networks.
I was surprised that "nbtscan -q 10.1.0.0/16" did not find your NAS boxes, because I believe that's how Pnethood does it. But maybe "nbtscan -q -t 3000 10.1.0.0/16" would work.
It's interesting that "nbtscan -q 10.1.1.0-254" did work with the default 1 second time interval.
I will be releasing a YASSM v2.3 shortly.
Bill
Posted: Wed 11 Jul 2012, 07:00
by Geoffrey
rcrsn51 wrote:I was surprised that "nbtscan -q 10.1.0.0/16" did not find your NAS boxes, because I believe that's how Pnethood does it. But maybe "nbtscan -q -t 3000 10.1.0.0/16" would work.
It certainly looks to be a timing issue.
Code: Select all
# nbtscan -q -t 3000 10.1.0.0/16
# nbtscan -q -t 4000 10.1.0.0/16
# nbtscan -q -t 5000 10.1.0.0/16
# nbtscan -q -t 6000 10.1.0.0/16
# nbtscan -q -t 7000 10.1.0.0/16
10.1.1.3 REPOTEC <server> REPOTEC 00-00-00-00-00-00
10.1.1.7 NAS <server> NAS 00-00-00-00-00-00
#
Geoff
Posted: Wed 11 Jul 2012, 08:37
by rcrsn51
Could you repeat that, but with
Posted: Wed 11 Jul 2012, 09:15
by Geoffrey
rcrsn51 wrote:Could you repeat that, but with
Code: Select all
nbtscan -q -t 1000 10.1.1.0-254
10.1.1.3 REPOTEC <server> REPOTEC 00-00-00-00-00-00
10.1.1.7 NAS <server> NAS 00-00-00-00-00-00
Time appears not to effect the result, "t" can be anything higher than "1"
Code: Select all
# nbtscan -q 10.1.1.0-254
10.1.1.7 NAS <server> NAS 00-00-00-00-00-00
10.1.1.3 REPOTEC <server> REPOTEC 00-00-00-00-00-00
#
Posted: Wed 11 Jul 2012, 10:48
by rcrsn51
Thank you again. This has been invaluable testing.
I have posted YASSM v2.3 above. The new samba-search tool should work with your network, but samba-login and samba-select are still available if you need them.
Bill
Posted: Wed 11 Jul 2012, 12:25
by Geoffrey
Brilliant, it works a treat, thankyou very much for this.