Page 4 of 5
Posted: Thu 17 Jan 2019, 09:33
by recobayu
I like this upupcc. Up to date applications here. I make sfs and pet from ppm. Openshot-2.4.2 32 bit run very well. I make an eyecandy using my remastermuks-19 here:
https://drive.google.com/open?id=19JVBL ... fkGH5VHups
I make ability to press enter after inputing password in sns. I edit the file /usr/local/simple_network_setup/sns in line about 252. I add
and I add in line 856
So I just press enter, not tab enter. I think this is also can be used by another puppy linux woof ce based.
Thank you, Peebee..
Posted: Sat 19 Jan 2019, 14:09
by peebee
+12 - more ubuntu updates
Posted: Sun 20 Jan 2019, 13:27
by Marv
Updated my upupcc frugal grub4dos install on the Fujitsu S761 i5 from +10 to +12. Skipped +11 as I don't use the Light adrive. No issues or changes in systemics or normal daily use seen. Also updated upupbb to +25 there also for the ubuntu updates, again, no changes seen. The combination of the JWM WM and my PcManFm integration sans gvfs in both continues to my be slick'n'quickest pups.
Cheers,
Posted: Sat 26 Jan 2019, 12:14
by peebee
+13 - woof-ce testing;3707b590;2019-01-23 + ubuntu updates
Posted: Mon 28 Jan 2019, 03:55
by Marv
+12 install 2 posts up updated to +13 using the delta. No hitches, no glitches, no changes noted in system checks or in relatively brief normal daily use.
Thanks,
Posted: Sat 02 Feb 2019, 17:27
by peebee
Posted: Sat 09 Feb 2019, 15:38
by peebee
Posted: Sat 02 Mar 2019, 15:14
by peebee
Posted: Sat 23 Mar 2019, 18:49
by peebee
Posted: Mon 25 Mar 2019, 14:19
by Marv
Bugfix (in reupload) tested and working. Running correctly in pupmode 13.
Thanks,
Posted: Sun 31 Mar 2019, 12:50
by peebee
Alpha testing build of UPupDD Disco Dingo is available (will replace UPupCC after 18 April....)
Posted: Fri 19 Apr 2019, 08:03
by peebee
CLOSED - see UPupDD Disco Dingo
Posted: Mon 22 Apr 2019, 19:28
by darry19662018
I have a lovely Sony Vaio VGN-FE15GP With Cosmic Cuttle Fish and Disco Dingo
I have no Gnome Mplayer playback of the following mp4 has anyone else had this issue?
Not just this .mp4.
Bionic works no probs same machine.
https://archive.org/download/doctor-who-s19-e01
Posted: Tue 23 Apr 2019, 04:46
by watchdog
darry19662018 wrote:I have a lovely Sony Vaio VGN-FE15GP With Cosmic Cuttle Fish and Disco Dingo
I have no Gnome Mplayer playback of the following mp4 has anyone else had this issue?
Not just this .mp4.
Bionic works no probs same machine.
https://archive.org/download/doctor-who-s19-e01
In Disco Dingo I have installed mpv and youtube-dl. (Gnome-mplayer not working and I have not installed a static mplayer as you have done). When downloaded your .mp4 I can play it with mpv.
Code: Select all
wget https://archive.org/download/doctor-who-s19-e01/Part%201.mp4
Rename the downloaded file as Part1.mp4 and:
It can play it also in streaming renouncing to https:
Code: Select all
mpv http://archive.org/download/doctor-who-s19-e01/Part%201.mp4
Is ffmpeg compiled with openssl support?
In cosmic cuttlefish I have VLC 3.0.4 and it can play your .mp4. Gnome-mplayer not working also for me in cosmic cuttlefish.
Posted: Tue 23 Apr 2019, 05:55
by darry19662018
Thank you Watchdog. Don't know what happened between Bionic and Cuttle/Dingo.
Here is a static mplayer for those with this problem.
https://sourceforge.net/projects/anitao ... z/download
Courtesy of good old Fred master of the static app.
Its a pity cos I quite like Cosmic otherwise.
Posted: Tue 23 Apr 2019, 06:11
by peebee
The test .mp4 plays for me on UPupDD MPlayer with no problems.......
So maybe a hardware or kernel problem??
Both MPlayer and ffmpeg were recompiled for UPupCC / UPupDD
I then recompiled ffmpeg for UPupDD
Posted: Tue 23 Apr 2019, 06:52
by watchdog
With your static mplayer I can play in upupdd and upupcc:
Code: Select all
gnome-mplayer http://archive.org/download/doctor-who-s19-e01/Part%201.mp4
Https not working.
My hardware report:
Code: Select all
# ./inxi -Fxx
System:
Host: puppypc32209 Kernel: 4.9.134-lxpup-32-pae i686 bits: 32
compiler: gcc v: 8.2.0 Desktop: JWM 2.3.7 dm: xinit Distro: Puppy 18.10
Machine:
Type: Laptop System: Hewlett-Packard product: HP 530 Notebook PC v: F.07
serial: CND8160FHM Chassis: type: 10 serial: CND8160FHM
Mobo: Hewlett-Packard model: 30D5 v: KBC Version 82.15 serial: N/A
BIOS: Hewlett-Packard v: 68MVU Ver. F.07 date: 03/18/2008
Battery:
ID-1: C1AC charge: 28.4 Wh condition: 29.6/29.6 Wh (100%) volts: 16.4/14.8
model: Hewlett-Packard Primary serial: 03643 2008/03/17 status: Unknown
CPU:
Topology: Single Core model: Intel Celeron M 520 bits: 64 type: MCP
arch: Core Merom rev: 1 L1 cache: 64 KiB L2 cache: 1024 KiB
flags: lm nx pae sse sse2 sse3 ssse3 bogomips: 3191
Speed: 1600 MHz min/max: 200/1600 MHz Core speed (MHz): 1: 1600
Graphics:
Device-1: Intel Mobile 945GSE Express Integrated Graphics driver: i915
v: kernel bus ID: 00:02.0 chip ID: 8086:27ae
Display: server: X.Org 1.20.1 driver: intel resolution: 1280x800~60Hz
OpenGL: renderer: Mesa DRI Intel 945GME x86/MMX/SSE2 v: 1.4 Mesa 18.2.8
direct render: Yes
Audio:
Device-1: Intel NM10/ICH7 Family High Definition Audio
driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:27d8
Device-2: Z-Star Micro Venus USB2.0 Camera type: USB
driver: snd-usb-audio,uvcvideo bus ID: 1-1.2:5 chip ID: 0ac8:3420
Sound Server: ALSA v: k4.9.134-lxpup-32-pae
Network:
Device-1: Intel 82562ET/EZ/GT/GZ - PRO/100 VE Ethernet Mobile driver: e100
v: 3.5.24-k2-NAPI port: 2000 bus ID: 02:08.0 chip ID: 8086:1068
IF: eth0 state: up speed: 100 Mbps duplex: full mac: 00:1e:ec:23:fd:95
Device-2: Broadcom and subsidiaries BCM4312 802.11b/g LP-PHY
driver: b43-pci-bridge v: N/A port: 2000 bus ID: 10:00.0
chip ID: 14e4:4315
IF-ID-1: wlan0 state: down mac: 00:21:00:09:91:98
Drives:
Local Storage: total: 260.84 GiB used: 204.69 GiB (78.5%)
ID-1: /dev/sda vendor: Toshiba model: MK1246GS size: 111.79 GiB
speed: 1.5 Gb/s serial: N/A
ID-2: /dev/sdb model: USB Disk size: 149.05 GiB serial: N/A
Partition:
ID-1: swap-1 size: 1024.0 MiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda2
Sensors:
Missing: Required tool sensors not installed. Check --recommends
Info:
Processes: 168 Uptime: 11m Memory: 1.46 GiB used: 284.0 MiB (19.0%)
Init: SysVinit v: N/A runlevel: 35 Compilers: gcc: 8.2.0 alt: 8
Shell: bash v: 4.4.19 running in: lxterminal inxi: 3.0.26
Posted: Tue 23 Apr 2019, 07:47
by peebee
...
Posted: Tue 23 Apr 2019, 08:13
by watchdog
It's a no-go... I attach picture.
Posted: Tue 23 Apr 2019, 08:19
by peebee
Ahhhh
You are attempting to run video from the website - I downloaded the video and ran it locally....
I would run in a web browser (Chromium) if I was trying to view a website version....
I've checked the ffmpeg build configs in UPupBB and UPupDD and they are identical....