(old)Puppy Linux Discussion Forum

my attempt at compiling wine 1.2-rc6

wine-1.2-rc6-i486.pet (release 1) - [link 1]
wine_DEV-1.2-rc6-i486.pet (release 1) (development package) - [link 1]
wine_DOC-1.2-rc6-i486.pet (release 1) (documentation package) - [link 1]
wine-1.2-rc6-i486-sfs3.sfs (release 1) - [link 1]
wine-1.2-rc6-i486-sfs4.sfs (release 1) - [link 1]

-------------------------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
I specifically used the files:
puppies-431.1-main-Xserver.iso
devx_430.sfs

puppies-431.1-main-Xserver.iso - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

devx_430.sfs - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

-------------------------------

Files located at <http://puppylinux.asia/> require a login.
(Username=puppy) (Password=linux)

I installed these packages before compiling:

esound-0.2.41-i486.pet
<http://puppylinux.asia/members/T/486_pe ... 1-i486.pet>

esound_DEV-0.2.41-i486.pet
<http://puppylinux.asia/members/T/486_pe ... 1-i486.pet>

fontconfig-2.7.1-i486-pup4.pet
<http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet>

fontconfig_DEV-2.7.1-i486-pup4.pet
<http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet>

gnutls+deps-2.6.6-i486.pet
<http://puppylinux.asia/members/T/444/gn ... 6-i486.pet>

gnutls+deps_DEV-2.6.6-i486.pet
<http://puppylinux.asia/members/T/444/gn ... 6-i486.pet>

jack-audio-connection-kit-0.116.1-i486.pet
<http://puppylinux.asia/members/T/444/ja ... 1-i486.pet>

jack-audio-connection-kit_DEV-0.116.1-i486.pet
<http://puppylinux.asia/members/T/444/ja ... 1-i486.pet>

openldap-2.4.13-i486.pet
<http://puppylinux.asia/members/T/444/op ... 3-i486.pet>

openldap_DEV-2.4.13-i486.pet
<http://puppylinux.asia/members/T/444/op ... 3-i486.pet>

xorg_xorg_full_dri-7.3.pet
<ftp://distro.ibiblio.org/pub/linux/dist ... ri-7.3.pet>

xorg_xorg_full_dri_DEV-7.3.pet
<ftp://distro.ibiblio.org/pub/linux/dist ... EV-7.3.pet>

-------------------------------

When compiling, I used Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' provided by forum member 'technosaurus'. The only changes I made to the contents of that file were to delete the file 'Wine_regedit.desktop'. That appears to be a duplicate file. I also deleted the file 'winetricks' and replaced it with the updated one.

For help with Gecko, look here

I use the console to install packages from winetricks. For help with this I use [source]

my graphics card is a Nvidia GeForce 8400GS, so I install the 'NVIDIA-190.42-k2.6.30.5-1.pet' from this post.

Dear green_dome,

Just so you know, your latest (rc6) installed fine in 3.x and 4.x. Again a big thank you.

With kind regards,
vovchik

Works great with Turbopup Extreme 1.0
Thanks!

sweet, works very well in lupu thank you!!!

Dear green_dome,

RC7 is out now, but you might want to wait for 1.2 final, which is just around the corner.

With kind regards,
vovchik

my attempt at compiling wine 1.2-rc7

wine-1.2-rc7-i486.pet (release 1) - (mirror 1)
wine_DEV-1.2-rc7-i486.pet (release 1) (development package) - (mirror 1)
wine_DOC-1.2-rc7-i486.pet (release 1) (documentation package) - (mirror 1)
wine-1.2-rc7-i486-sfs3.sfs (release 1) - (mirror 1)
wine-1.2-rc7-i486-sfs4.sfs (release 1) - (mirror 1)

-------------------------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
I specifically used the files:
puppies-431.1-main-Xserver.iso
devx_430.sfs

puppies-431.1-main-Xserver.iso - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

devx_430.sfs - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

-------------------------------

Files located at <http://puppylinux.asia/> require a login.
(Username=puppy) (Password=linux)

I installed these packages before compiling:

esound-0.2.41-i486.pet
<http://puppylinux.asia/members/T/486_pe ... 1-i486.pet>

esound_DEV-0.2.41-i486.pet
<http://puppylinux.asia/members/T/486_pe ... 1-i486.pet>

fontconfig-2.7.1-i486-pup4.pet
<http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet>

fontconfig_DEV-2.7.1-i486-pup4.pet
<http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet>

gnutls+deps-2.6.6-i486.pet
<http://puppylinux.asia/members/T/444/gn ... 6-i486.pet>

gnutls+deps_DEV-2.6.6-i486.pet
<http://puppylinux.asia/members/T/444/gn ... 6-i486.pet>

jack-audio-connection-kit-0.116.1-i486.pet
<http://puppylinux.asia/members/T/444/ja ... 1-i486.pet>

jack-audio-connection-kit_DEV-0.116.1-i486.pet
<http://puppylinux.asia/members/T/444/ja ... 1-i486.pet>

openldap-2.4.13-i486.pet
<http://puppylinux.asia/members/T/444/op ... 3-i486.pet>

openldap_DEV-2.4.13-i486.pet
<http://puppylinux.asia/members/T/444/op ... 3-i486.pet>

xorg_xorg_full_dri-7.3.pet
<ftp://distro.ibiblio.org/pub/linux/dist ... ri-7.3.pet>

xorg_xorg_full_dri_DEV-7.3.pet
<ftp://distro.ibiblio.org/pub/linux/dist ... EV-7.3.pet>

-------------------------------

When compiling, I used Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' provided by forum member 'technosaurus'. The only changes I made to the contents of that file were to delete the file 'Wine_regedit.desktop'. That appears to be a duplicate file. I also deleted the file 'winetricks' and replaced it with the updated one.

For help with Gecko, look here

I use the console to install packages from winetricks. For help with this I use [source]

my graphics card is a Nvidia GeForce 8400GS, so I install the 'NVIDIA-190.42-k2.6.30.5-1.pet' from this post.

Dear green_dome,

Works well, as expected, in 3.x and 4.x - so I am very happy.

I think 1.2 final will be out soon.

Thanks.

With kind regards,
vovchik

Thank you guys, once again.

I know if Wine has been compiled by green_dome and tested by vovchik, it will almost certainly work OK on my Puppy 431 Retro.

I will test to use it on puppeee and report back.

sorry it says

NOTICE: This is an older version 3.x squashfs file, not usable.
All Linux kernels 2.6.29 or later require version 4.x squashfs files.
Note, there is an SFS-version-converter in the Utility menu, run that first.

There is are two sfs files available, one for sfs3 and one for sfs4.
Yes, the 'SFSconvert version converter' application is quite useful.

my attempt at compiling wine 1.2

wine-1.2-i486.pet (release 1) - (mirror 1)
wine_DEV-1.2-i486.pet (release 1) (development package) - (mirror 1)
wine_DOC-1.2-i486.pet (release 1) (documentation package) - (mirror 1)
wine-1.2-i486-sfs3.sfs (release 1) - (mirror 1)
wine-1.2-i486-sfs4.sfs (release 1) - (mirror 1)

-----------------------------------------------------------------------------------------------------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
I specifically used the files:
puppies-431.1-main-Xserver.iso
devx_430.sfs

puppies-431.1-main-Xserver.iso - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

devx_430.sfs - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

-----------------------------------------------------------------------------------------------------------

Files located at (http://puppylinux.asia/) require a login.
(Username=puppy) (Password=linux)

I installed these packages before compiling:

esound-0.2.41-i486.pet
(http://puppylinux.asia/members/T/486_pe ... 1-i486.pet)

esound_DEV-0.2.41-i486.pet
(http://puppylinux.asia/members/T/486_pe ... 1-i486.pet)

fontconfig-2.7.1-i486-pup4.pet
(http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet)

fontconfig_DEV-2.7.1-i486-pup4.pet
(http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet)

gnutls+deps-2.6.6-i486.pet
(http://puppylinux.asia/members/T/444/gn ... 6-i486.pet)

gnutls+deps_DEV-2.6.6-i486.pet
(http://puppylinux.asia/members/T/444/gn ... 6-i486.pet)

jack-audio-connection-kit-0.116.1-i486.pet
(http://puppylinux.asia/members/T/444/ja ... 1-i486.pet)

jack-audio-connection-kit_DEV-0.116.1-i486.pet
(http://puppylinux.asia/members/T/444/ja ... 1-i486.pet)

libgphoto2-2.4.6-pup4.pet
(http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet)

libgphoto2_DEV-2.4.6-pup4.pet
(http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet)

openldap-2.4.13-i486.pet
(http://puppylinux.asia/members/T/444/op ... 3-i486.pet)

openldap_DEV-2.4.13-i486.pet
(http://puppylinux.asia/members/T/444/op ... 3-i486.pet)

xorg_xorg_full_dri-7.3.pet
(ftp://distro.ibiblio.org/pub/linux/dist ... ri-7.3.pet)

xorg_xorg_full_dri_DEV-7.3.pet
(ftp://distro.ibiblio.org/pub/linux/dist ... EV-7.3.pet)

-----------------------------------------------------------------------------------------------------------

When compiling, I used Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' provided by forum member 'technosaurus'. The only changes I made to the contents of that file were to delete the file 'Wine_regedit.desktop'. That appears to be a duplicate file. I also deleted the file 'winetricks' and replaced it with the updated one.

For help with Gecko, look here

I use the console to install packages from winetricks. For help with this I use [source]

my graphics card is a Nvidia GeForce 8400GS, so I install the 'NVIDIA-190.42-k2.6.30.5-1.pet' from this post.

Hi green-dome

Thank for your 1.2 update today which I installed in Lucid Puppy 5.0.0

My regards

Dear green_dome,

Wine is getting better and better. Thanks for this compile. Works nicely in 3.x and 4.x, as is usual for your versions.

With kind regards,
vovchik

Hi again green_dome

I have two Windows programs - which work perfectly using Wine 1.0.1 from Xubuntu, but one, Kalender (a calendar/reminder/to-do program), does not work at all using Wine 1.2 and the other works imperfectly.

So I would like to try Wine 1.0.1 from Lucid Puppy 5.0.0 and I wonder if you could direct me to a suitable installation download, but, if that is not already available, please do not write a special program just for me.

My regards

I am now on Acer Netbook and use Puppeee and Quirky 1.0 both with

Wine 1.1.40 Rc7 and you guys talk about Wine 1.2.

How does the newest differ from the older?

What would be better?

Dear nooby,

Literally thousands of changes and improvements - even between RC versions. Check out the change logs at winehq.org. Wine is a "work in progress" and a moving target to boot, so you are advised to try the latest if you want maximum compatibility and features. That is not to say that regression errors do not occur.

With kind regards,
vovchik

Thanks, that sounds like something to look forward to enjoy then.

typical of me now that I got spotify finally working I will only test new wine on other OS than those two I make use of now.

But thanks for keeping me update on the progress.

green_dome wrote:my attempt at compiling wine 1.2

Green_dome, thanks, I've adapted your latest wine for Fatdog.

cheers!

Dear green_dome,

We've got a new one: http://www.winehq.org/announce/1.3.0.

With thanks in advance,
vovchik

I installed the 1.2 sfs in Lucid Puppy 5.1 and it works perfectly. Even better than the official pet offered in Lupu's quickpet! My Quake 2 & 3 and Unreal Tournament games run great now.

Thanks green_dome