Puplite 5.0
sc0ttman, Sorry to bother but now of the version 2 links work.
version 1 is still intact but not 2
Could you care to check once more?
John
version 1 is still intact but not 2
Could you care to check once more?
John
- Attachments
-
- none works.png
- (103.78 KiB) Downloaded 550 times
Hmm... No idea why it doesnt work for you!puppyiso wrote:sc0ttman, Sorry to bother but now of the version 2 links work.
version 1 is still intact but not 2
Could you care to check once more?
John
I'll upload to a mirror for direct download today.
[b][url=https://bit.ly/2KjtxoD]Pkg[/url], [url=https://bit.ly/2U6dzxV]mdsh[/url], [url=https://bit.ly/2G49OE8]Woofy[/url], [url=http://goo.gl/bzBU1]Akita[/url], [url=http://goo.gl/SO5ug]VLC-GTK[/url], [url=https://tiny.cc/c2hnfz]Search[/url][/b]
-
- Posts: 544
- Joined: Thu 22 Jan 2009, 14:20
2 questions
Hallo Sc0tt,sc0ttman wrote:To do for 3.0:
- make hot plugging of usb devices refresh the jwm-only desktop
- make jwm drive icons show different icon for usb drives
- enable hotplugging by default, if working on jwm desktop
- make 'refreshjwm' (fixmenus_on_locale) run create_jwmrc_drives.sh, if not ROX desktop
- add madwifi and hal drivers from tempestuous to zdrv
- add fixed and updated xorgwizard - will boot xvesa, no issues
- add a simple quickpet (will have nice puppy hosting by 3.0 release time)
Suggestions?
Then:
Make a version of Puplite with the Lupu kernel...
Or the Wary kernel... Or the Fluppy kernel.
Notes about newer kernel version:
- It will boot straight to Xorg, not Xvesa
- OTF-sfs-loading from goingnuts will not work, but gyro has made something very similar for newer pups
- The default versions of mksquashfs and unsquashfs will be reversed (from v3 to v4)
Asked you to tell me what I did wrong with sfs-conversion from 5 to 4.in earlier post. Only answer :"works nice". Still do not know what I am doing wrong. (Tried on Trio's and even when it tells "all went well e'thing ok, did not work on mounting.)
Being a very low profile user I do not even know what a kernel is (something like the engineblock in a car ?).
Q1
Reading that you plan to upgrade kernel to lupu. does it mean the sfs conversion from 5 to 4 might work from then on also for me ?
You also talk about MIME.
Q2
What are mimes and what can one do with it ?
Good to hear about the xorg.
Nice work you're doing.
- technosaurus
- Posts: 4853
- Joined: Mon 19 May 2008, 01:24
- Location: Blue Springs, MO
- Contact:
Re sfs convert
your new sfs file will end up in the directory that you specify in the converter program as a completely _DIFFERENT_ file
IIRC the dialog tells you all about it, but there _are_ so many informative yet really lengthy dialogues that they do tend to get ignored in the interest of time management - sometimes it is difficult to be both precise _and_ concise
your new sfs file will end up in the directory that you specify in the converter program as a completely _DIFFERENT_ file
IIRC the dialog tells you all about it, but there _are_ so many informative yet really lengthy dialogues that they do tend to get ignored in the interest of time management - sometimes it is difficult to be both precise _and_ concise
Check out my [url=https://github.com/technosaurus]github repositories[/url]. I may eventually get around to updating my [url=http://bashismal.blogspot.com]blogspot[/url].
-
- Posts: 544
- Joined: Thu 22 Jan 2009, 14:20
Suggestions ?
[quote="sc0ttman"]
To do for 3.0:
Suggestions?
quote]
Would it be hard to implement the feature "print to pdf"of a webpage ?
To do for 3.0:
Suggestions?
quote]
Would it be hard to implement the feature "print to pdf"of a webpage ?
-
- Posts: 544
- Joined: Thu 22 Jan 2009, 14:20
Teamviewer 6 uploaded installs in Puplite
Sidders posted here (page 3) Teamviewer 6
http://murga-linux.com/puppy/viewtopic. ... 6&start=30
and uploaded to filefront
http://www.filefront.com/17775899/teamviewer6.pet
Worked for him in Lupu.
Installed also in Puplite 2 !!!!
http://murga-linux.com/puppy/viewtopic. ... 6&start=30
and uploaded to filefront
http://www.filefront.com/17775899/teamviewer6.pet
Worked for him in Lupu.
Installed also in Puplite 2 !!!!
Re: 2 questions
Double click on any sfs file in Puplite 2.0, and it will tell if the version needs converting.nancy reagan wrote:Q1
Reading that you plan to upgrade kernel to lupu. does it mean the sfs conversion from 5 to 4 might work from then on also for me ?
You can then choose to convert it, if you need to, Trios SFS Convertor will load up for you, ready to go
Basically, in Puppy, MIME types are used to decide what to do when you double click on a file in ROX, based on filetype.nancy reagan wrote:Q2
What are mimes and what can one do with it ?
I *think* I have already included everything needed for CUPS pdf printing in the printing sfs addon, that is available here:nancy reagan wrote:Would it be hard to implement the feature "print to pdf"of a webpage ?
http://eminima.org/puplite/printing_420.sfs
Yes, I think Puppy 4.2 (2.6.25.16) does not like your hardware...svgt wrote:I tried a lot of network tools. But I don't succeed with my LAN connection. My onboard chip is VIA VT6102 Rhine II.
It works with all my other puppies, Lupus, Wary at least till Puppy 431.
Try this thread: http://murga-linux.com/puppy/viewtopic.php?t=34159
[b][url=https://bit.ly/2KjtxoD]Pkg[/url], [url=https://bit.ly/2U6dzxV]mdsh[/url], [url=https://bit.ly/2G49OE8]Woofy[/url], [url=http://goo.gl/bzBU1]Akita[/url], [url=http://goo.gl/SO5ug]VLC-GTK[/url], [url=https://tiny.cc/c2hnfz]Search[/url][/b]
updated to 3.0, see main post
no upgraded kernel yet, coming soon, I think..
no upgraded kernel yet, coming soon, I think..
[b][url=https://bit.ly/2KjtxoD]Pkg[/url], [url=https://bit.ly/2U6dzxV]mdsh[/url], [url=https://bit.ly/2G49OE8]Woofy[/url], [url=http://goo.gl/bzBU1]Akita[/url], [url=http://goo.gl/SO5ug]VLC-GTK[/url], [url=https://tiny.cc/c2hnfz]Search[/url][/b]
-
- Posts: 9
- Joined: Fri 15 Oct 2010, 18:12
ndiswrapper
hello. i really enjoy this puplet, and i'm attempting to use it to bring an old pII laptop back to life... dougals network wizard allows me to select ndiswrapper, and then point it to the right .inf file, and though it says it's loaded- it fails to recognize the device. any ideas? i've used ndiswrapper successfully on this machine with turbopup, 4.31, and even 5.11... am i doing something wrong?
Re: ndiswrapper
Hmm, it should work on Puplite, if it works on TurboPup, unless some extra dependencies were removed (entirely possible!)... I think it requires PERL, which should be installed, but I'd have to check it out, never used ndiswrapper though...phillypretzel wrote:hello. i really enjoy this puplet, and i'm attempting to use it to bring an old pII laptop back to life... dougals network wizard allows me to select ndiswrapper, and then point it to the right .inf file, and though it says it's loaded- it fails to recognize the device. any ideas? i've used ndiswrapper successfully on this machine with turbopup, 4.31, and even 5.11... am i doing something wrong?
You can get PERL from the puppy 4 packages repo on ibiblio
The link is on the Puplite homepage (see first post)
[b][url=https://bit.ly/2KjtxoD]Pkg[/url], [url=https://bit.ly/2U6dzxV]mdsh[/url], [url=https://bit.ly/2G49OE8]Woofy[/url], [url=http://goo.gl/bzBU1]Akita[/url], [url=http://goo.gl/SO5ug]VLC-GTK[/url], [url=https://tiny.cc/c2hnfz]Search[/url][/b]
Also, thanks very muchmauri wrote:hi,
thanks a lot,
for the nice made light wight pupplet,
i have downloaded, and test it as live cd and it runs very fast and stable,
regards
mauri
Glad you like it
[b][url=https://bit.ly/2KjtxoD]Pkg[/url], [url=https://bit.ly/2U6dzxV]mdsh[/url], [url=https://bit.ly/2G49OE8]Woofy[/url], [url=http://goo.gl/bzBU1]Akita[/url], [url=http://goo.gl/SO5ug]VLC-GTK[/url], [url=https://tiny.cc/c2hnfz]Search[/url][/b]
like to try puplite but need xorg
this system, otherwise admirable, does not work with xvesa, only xorg
i took a look with pfind in the puppy431, [which is running well on this
pentium 2,, 266mhz,,160mb-ram,,toshiba laptop ~1998], to see if i could copy
xorg files to the puplite sfs, then try booting it again.
i realised that using xorg from pup420 would be better but wanted to
see how complex the task might be before looking for the right 420
and downloading it. pfind showed 16 files, about half were in /etc so
i looked at puplite sfs where /etc showed empty.
at which point i began this post. here is the video driver info from
the xorg config file in this puppy431:
Driver "chips" #card0driver
VendorName "Chips and Technologies"
BoardName "F65555 HiQVPro"
i appreciate any help you can give, either to see if xvesa can be got to work
or pointers as to how i might add xorg to yr puplite, which i'm really keen
to try on this fine little system--a couple of weeks ago it fell about 2 feet to
the floor, while running, from where it was standing on end, driving an external monitor---didn't even hiccouph!
all the best, thanks, mm
i took a look with pfind in the puppy431, [which is running well on this
pentium 2,, 266mhz,,160mb-ram,,toshiba laptop ~1998], to see if i could copy
xorg files to the puplite sfs, then try booting it again.
i realised that using xorg from pup420 would be better but wanted to
see how complex the task might be before looking for the right 420
and downloading it. pfind showed 16 files, about half were in /etc so
i looked at puplite sfs where /etc showed empty.
at which point i began this post. here is the video driver info from
the xorg config file in this puppy431:
Driver "chips" #card0driver
VendorName "Chips and Technologies"
BoardName "F65555 HiQVPro"
i appreciate any help you can give, either to see if xvesa can be got to work
or pointers as to how i might add xorg to yr puplite, which i'm really keen
to try on this fine little system--a couple of weeks ago it fell about 2 feet to
the floor, while running, from where it was standing on end, driving an external monitor---didn't even hiccouph!
all the best, thanks, mm
Re: like to try puplite but need xorg
Not sure why, xvesa works for me... Maybe see the next post, below.mmmrr wrote:this system, otherwise admirable, does not work with xvesa, only xorg
all the best, thanks, mm
[b][url=https://bit.ly/2KjtxoD]Pkg[/url], [url=https://bit.ly/2U6dzxV]mdsh[/url], [url=https://bit.ly/2G49OE8]Woofy[/url], [url=http://goo.gl/bzBU1]Akita[/url], [url=http://goo.gl/SO5ug]VLC-GTK[/url], [url=https://tiny.cc/c2hnfz]Search[/url][/b]
Puplite 4.0 released, see the main thread, homepage link.
puplite 4.0:
x fixed: rc.otf-sfs (in /etc/init.d) works again
x fixed: using "vlc -I dummy" in /usr/local/bin/defaultmediaplayer (took me a while!)
x fixed: remove stuff from /root/.packages/alienpackages, as needed
x fixed: fixmenus_on_locale only restarts rox if using rox desktop
x update: boots straight to xorg, 1024x768 (no idea how or why!)
x update: jwm apps menu, with favourites manager and separators
x update: defaults-chooser options (better GUI and dep checks. also added more apps)
x update: xorgwizard now auto starts xvesa after it is chosen
x update: upgrade to ptiming-0.4, pmusic-1.5.3, pburn-3.3.3,
x update: use smaller freememapplet and network thing from goingnuts (edit _jwmrc_ and _jwmrc-tray_)
x update: disable original freememapplet in /root/startup
x update: startups, with avfs info, avfs not exec by default
x add: puppy-5-compatibility.pet - easily download and install lupu compatibility pet
x add: rox right-click options for sfs - 'convert sfs' and 'load sfs'
x add: rox right click option for archives - view contents
x add: elinks text only/cli/no x web browser (adds 360kb) (you'll be glad it's there when you need it)
x add: samba-tng, plus cups-smbspool, plus client (adds 1mb! but it rocks.. apparently!)
x add: pnethood 0.6.6.1 - updated network shares gui thing
x add: 'easypackage' pet or sfs creator script (replaces pets2sfs script, but you can use either name in terminal)
x add: ptiming, sgtt time tracker, lightsword alarm, gstp stopwatch - more timer stuff
x add: gtk-file-splitter and gtklxsplit - more file management
x add: pccrypt, strong file and dir encryption
x add: macchanger-1.5.0 cli tool - change your MAC address
x add: gPeriodic and Galculator - more science stuff
x add: Getez and Uget - more download stuff
x add: tiny-elvis (small vi-like editor, not perfect but nice enough)
x add: more static busybox daemons
x add: xorg drivers for wizardpen tablet drawing things
x add: simple xdialog gui for macchanger, menu entry in 'Network'
puplite 4.0:
x fixed: rc.otf-sfs (in /etc/init.d) works again
x fixed: using "vlc -I dummy" in /usr/local/bin/defaultmediaplayer (took me a while!)
x fixed: remove stuff from /root/.packages/alienpackages, as needed
x fixed: fixmenus_on_locale only restarts rox if using rox desktop
x update: boots straight to xorg, 1024x768 (no idea how or why!)
x update: jwm apps menu, with favourites manager and separators
x update: defaults-chooser options (better GUI and dep checks. also added more apps)
x update: xorgwizard now auto starts xvesa after it is chosen
x update: upgrade to ptiming-0.4, pmusic-1.5.3, pburn-3.3.3,
x update: use smaller freememapplet and network thing from goingnuts (edit _jwmrc_ and _jwmrc-tray_)
x update: disable original freememapplet in /root/startup
x update: startups, with avfs info, avfs not exec by default
x add: puppy-5-compatibility.pet - easily download and install lupu compatibility pet
x add: rox right-click options for sfs - 'convert sfs' and 'load sfs'
x add: rox right click option for archives - view contents
x add: elinks text only/cli/no x web browser (adds 360kb) (you'll be glad it's there when you need it)
x add: samba-tng, plus cups-smbspool, plus client (adds 1mb! but it rocks.. apparently!)
x add: pnethood 0.6.6.1 - updated network shares gui thing
x add: 'easypackage' pet or sfs creator script (replaces pets2sfs script, but you can use either name in terminal)
x add: ptiming, sgtt time tracker, lightsword alarm, gstp stopwatch - more timer stuff
x add: gtk-file-splitter and gtklxsplit - more file management
x add: pccrypt, strong file and dir encryption
x add: macchanger-1.5.0 cli tool - change your MAC address
x add: gPeriodic and Galculator - more science stuff
x add: Getez and Uget - more download stuff
x add: tiny-elvis (small vi-like editor, not perfect but nice enough)
x add: more static busybox daemons
x add: xorg drivers for wizardpen tablet drawing things
x add: simple xdialog gui for macchanger, menu entry in 'Network'
- Attachments
-
- jwm-faves2.jpg
- easy access to your favourite apps
- (12.31 KiB) Downloaded 1400 times
-
- jwm-faves1.jpg
- add your favourite apps to the jwm apps menu (the middle click menu)
- (21 KiB) Downloaded 1307 times
-
- pup5-compat.jpg
- (24.64 KiB) Downloaded 1873 times
-
- sfs-right-click.jpg
- (19.49 KiB) Downloaded 1312 times
-
- roxrightclickarchives.jpg
- (54.78 KiB) Downloaded 387 times
-
- macchanger-gui.jpg
- (12.3 KiB) Downloaded 1310 times
Last edited by sc0ttman on Sat 22 Jan 2011, 10:35, edited 1 time in total.
[b][url=https://bit.ly/2KjtxoD]Pkg[/url], [url=https://bit.ly/2U6dzxV]mdsh[/url], [url=https://bit.ly/2G49OE8]Woofy[/url], [url=http://goo.gl/bzBU1]Akita[/url], [url=http://goo.gl/SO5ug]VLC-GTK[/url], [url=https://tiny.cc/c2hnfz]Search[/url][/b]
thanks for yr reply, sc0ttman
xvesa doesn't work on any puppy i've ever tried on target machine: all go to black and freeze; xorg always works over a big range of display sizes...
this line
'x update: xorgwizard now auto starts xvesa after it is chosen'
if i knew where to look could i not auto start xvesa and choose xorg...or am i missing something..the usual
xorg/xvesa choice window whizzed by without a pause, so fast i couldn't be sure what i was seeing actually.
cheers, mm
xvesa doesn't work on any puppy i've ever tried on target machine: all go to black and freeze; xorg always works over a big range of display sizes...
this line
'x update: xorgwizard now auto starts xvesa after it is chosen'
if i knew where to look could i not auto start xvesa and choose xorg...or am i missing something..the usual
xorg/xvesa choice window whizzed by without a pause, so fast i couldn't be sure what i was seeing actually.
cheers, mm
The normal boot of Puplite should go straight to Xorg. If not, Xorgwizard loads.mmmrr wrote:thanks for yr reply, sc0ttman
xvesa doesn't work on any puppy i've ever tried on target machine: all go to black and freeze; xorg always works over a big range of display sizes...
this line
'x update: xorgwizard now auto starts xvesa after it is chosen'
if i knew where to look could i not auto start xvesa and choose xorg...or am i missing something..the usual
xorg/xvesa choice window whizzed by without a pause, so fast i couldn't be sure what i was seeing actually.
cheers, mm
Xorgwizard only autostarts xvesa if you tell it to do so..
Download it and try it, it will probably boot straight to Xorg for you, no xvesa.
[b][url=https://bit.ly/2KjtxoD]Pkg[/url], [url=https://bit.ly/2U6dzxV]mdsh[/url], [url=https://bit.ly/2G49OE8]Woofy[/url], [url=http://goo.gl/bzBU1]Akita[/url], [url=http://goo.gl/SO5ug]VLC-GTK[/url], [url=https://tiny.cc/c2hnfz]Search[/url][/b]