(old)Puppy Linux Discussion Forum

Dear nooby,

Literally thousands of changes and improvements - even between RC versions. Check out the change logs at winehq.org. Wine is a "work in progress" and a moving target to boot, so you are advised to try the latest if you want maximum compatibility and features. That is not to say that regression errors do not occur.

With kind regards,
vovchik

Thanks, that sounds like something to look forward to enjoy then.

typical of me now that I got spotify finally working I will only test new wine on other OS than those two I make use of now.

But thanks for keeping me update on the progress.

green_dome wrote:my attempt at compiling wine 1.2

Green_dome, thanks, I've adapted your latest wine for Fatdog.

cheers!

Dear green_dome,

We've got a new one: http://www.winehq.org/announce/1.3.0.

With thanks in advance,
vovchik

I installed the 1.2 sfs in Lucid Puppy 5.1 and it works perfectly. Even better than the official pet offered in Lupu's quickpet! My Quake 2 & 3 and Unreal Tournament games run great now.

Thanks green_dome

my attempt at compiling wine 1.3.0

wine-1.3.0-i486.pet (release 1) - (mirror 1)
wine_DEV-1.3.0-i486.pet (release 1) (development package) - (mirror 1)
wine_DOC-1.3.0-i486.pet (release 1) (documentation package) - (mirror 1)
wine-1.3.0-i486-sfs3.sfs (release 1) - (mirror 1)
wine-1.3.0-i486-sfs4.sfs (release 1) - (mirror 1)

-----------------------------------------------------------------------------------------------------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
I specifically used the files:
puppies-431.1-main-Xserver.iso
devx_430.sfs

puppies-431.1-main-Xserver.iso - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

devx_430.sfs - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

-----------------------------------------------------------------------------------------------------------

Files located at (http://puppylinux.asia/) require a login.
(Username=puppy) (Password=linux)

I installed these packages before compiling:

esound-0.2.41-i486.pet
(http://puppylinux.asia/members/T/486_pe ... 1-i486.pet)

esound_DEV-0.2.41-i486.pet
(http://puppylinux.asia/members/T/486_pe ... 1-i486.pet)

fontconfig-2.7.1-i486-pup4.pet
(http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet)

fontconfig_DEV-2.7.1-i486-pup4.pet
(http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet)

gnutls+deps-2.6.6-i486.pet
(http://puppylinux.asia/members/T/444/gn ... 6-i486.pet)

gnutls+deps_DEV-2.6.6-i486.pet
(http://puppylinux.asia/members/T/444/gn ... 6-i486.pet)

jack-audio-connection-kit-0.116.1-i486.pet
(http://puppylinux.asia/members/T/444/ja ... 1-i486.pet)

jack-audio-connection-kit_DEV-0.116.1-i486.pet
(http://puppylinux.asia/members/T/444/ja ... 1-i486.pet)

libgphoto2-2.4.6-pup4.pet
(http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet)

libgphoto2_DEV-2.4.6-pup4.pet
(http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet)

openldap-2.4.13-i486.pet
(http://puppylinux.asia/members/T/444/op ... 3-i486.pet)

openldap_DEV-2.4.13-i486.pet
(http://puppylinux.asia/members/T/444/op ... 3-i486.pet)

xorg_xorg_full_dri-7.3.pet
(ftp://distro.ibiblio.org/pub/linux/dist ... ri-7.3.pet)

xorg_xorg_full_dri_DEV-7.3.pet
(ftp://distro.ibiblio.org/pub/linux/dist ... EV-7.3.pet)

-----------------------------------------------------------------------------------------------------------

When compiling, I used Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' provided by forum member 'technosaurus'. The only changes I made to the contents of that file were to delete the file 'Wine_regedit.desktop'. That appears to be a duplicate file. I also deleted the file 'winetricks' and replaced it with the updated one.

For help with Gecko, look here

I use the console to install packages from winetricks. For help with this I use [source]

my graphics card is a Nvidia GeForce 8400GS, so I install the 'NVIDIA-190.42-k2.6.30.5-1.pet' from this post.

Dear green_dome,

Glad you are back. The new version works nicely, as usual, so thanks again.

With kind regards,
vovchik

my attempt at compiling wine 1.3.1

wine-1.3.1-i486.pet (release 1)
http://www.wuala.com/version2013/Public ... -i486.pet/

wine_DEV-1.3.1-i486.pet (release 1) (development package)
http://www.wuala.com/version2013/Public ... -i486.pet/

wine_DOC-1.3.1-i486.pet (release 1) (documentation package)
http://www.wuala.com/version2013/Public ... -i486.pet/

wine-1.3.1-i486-sfs3.sfs (release 1)
http://www.wuala.com/version2013/Public ... -sfs3.sfs/

wine-1.3.1-i486-sfs4.sfs (release 1)
http://www.wuala.com/version2013/Public ... -sfs4.sfs/

-----------------------------------------------------------------------------------------------------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
I specifically used the files:
puppies-431.1-main-Xserver.iso
devx_430.sfs

puppies-431.1-main-Xserver.iso - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

devx_430.sfs - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

-----------------------------------------------------------------------------------------------------------

Files located at http://puppylinux.asia/ require a login.
(Username=puppy) (Password=linux)

I installed these packages before compiling:

esound-0.2.41-i486.pet
http://puppylinux.asia/members/T/486_pe ... 1-i486.pet

esound_DEV-0.2.41-i486.pet
http://puppylinux.asia/members/T/486_pe ... 1-i486.pet

fontconfig-2.7.1-i486-pup4.pet
http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet

fontconfig_DEV-2.7.1-i486-pup4.pet
http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet

gnutls+deps-2.6.6-i486.pet
http://puppylinux.asia/members/T/444/gn ... 6-i486.pet

gnutls+deps_DEV-2.6.6-i486.pet
http://puppylinux.asia/members/T/444/gn ... 6-i486.pet

jack-audio-connection-kit-0.116.1-i486.pet
http://puppylinux.asia/members/T/444/ja ... 1-i486.pet

jack-audio-connection-kit_DEV-0.116.1-i486.pet
http://puppylinux.asia/members/T/444/ja ... 1-i486.pet

libgphoto2-2.4.6-pup4.pet
http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet

libgphoto2_DEV-2.4.6-pup4.pet
http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet

openldap-2.4.13-i486.pet
http://puppylinux.asia/members/T/444/op ... 3-i486.pet

openldap_DEV-2.4.13-i486.pet
http://puppylinux.asia/members/T/444/op ... 3-i486.pet

xorg_xorg_full_dri-7.3.pet
ftp://distro.ibiblio.org/pub/linux/dist ... ri-7.3.pet

xorg_xorg_full_dri_DEV-7.3.pet
ftp://distro.ibiblio.org/pub/linux/dist ... EV-7.3.pet

-----------------------------------------------------------------------------------------------------------

When compiling, I used Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' provided by forum member 'technosaurus'. The only changes I made to the contents of that file were to delete the file 'Wine_regedit.desktop'. That appears to be a duplicate file. I also deleted the file 'winetricks' and replaced it with the updated one.

For help with Gecko, look here

I use the console to install packages from winetricks. For help with this I use [source]

my graphics card is a Nvidia GeForce 8400GS, so I install the 'NVIDIA-190.42-k2.6.30.5-1.pet' from this post.

green_dome, Excellent as usual, thank you.

Dear green_dome,

My thanks, too....

With kind regards,
vovchik

Hi green_dome,

would it be a burden for you to create an up to date version compatable with the 5.1.x and lucid series, we are at 1.1.43 at present.

I want to see if I can run a couple of programs that are holding me back from a total windows free environment as well as trying to setup our aussie taxpack.

Playdayz and 01micko are the 5.1.x co-ordinators/creators.

Latest thread is:
http://www.murga-linux.com/puppy/viewtopic.php?t=58978

regards and thanks
scsijon

Scsijon, I am using the newest .pet from this thread with Puppy 5.1 with no problems

Scsijon,
It is my understanding that 'Wine 1.1.43' found in ' Lucid Puppy 115' and/or 'LP 116' is the package that I compiled. [1] [2] [3]
Hopefully the newer Wine packages work just as well in Lucid.


References:
[1] http://murga-linux.com/puppy/viewtopic. ... 905#415905
[2] http://murga-linux.com/puppy/viewtopic. ... 261#416261
[3] http://www.murga-linux.com/puppy/viewto ... 909#415909

Dear green_dome,

I don't want to burden you unnecessarily, but Wine 1.3.2 has just been released.

With thanks in advance and kind regards,
vovchik

Hi,

Sorry to be the one asking the stupid questions, but I have problems with this..

System:
Puppy 4.3.1 - new clean install running off a CF card in a IDE adaptor with a mini ITX embedded PC 256Mb RAM 256Mb puppy file, tight VNC server and no monitor.

I downloaded the PET from the link above, verfied OK and installed. - all the menu items appeared but none worked - from the command prompt I tried winecfg - this resulted in the error message in the screen shot below

As I had a clean install I tried installing all the files in green_domes's post above

esound-0.2.41-i486.pet
etc.
etc.
(don't know if I neeed to do this or not?)

But I still get the same error messages. Does anyone have any ideas, it's almost like the PET is corrupted but it decompressed and validated OK so I have no idea.

Thanks
Alison

Dear AliG,

I have installed all green_dome's versions and they all work. Form your screenshot I smell a corrupt download, since the message was that certain files are either not found (essential ones) or they are too short. Please download and try again. The pet is OK.

With kind regards,
vovchik

Vovchik,

OK download the .PET again - check the MD5 sum I get "8de9f588dfb1641f2c0ea05bd4b60605" this is not the same as the one on the Wuala web page... Tried a couple more times with different MD5 each time!

Tried the SFS file - MD5 sum matches the one on the web - added to boot manager, and I'm up and running.

No idea what the problem with the PET is vs the SFS (perhaps only tempoary) - but thanks for the suggestion. Now I'm off to install my data logger software and learn about serial ports under WINE..

Спа

my attempt at compiling wine 1.3.2

wine-1.3.2-i486.pet (release 1)
http://www.wuala.com/version2013/Public ... -i486.pet/

wine_DEV-1.3.2-i486.pet (release 1) (development package)
http://www.wuala.com/version2013/Public ... -i486.pet/

wine_DOC-1.3.2-i486.pet (release 1) (documentation package)
http://www.wuala.com/version2013/Public ... -i486.pet/

wine-1.3.2-i486-sfs3.sfs (release 1)
http://www.wuala.com/version2013/Public ... -sfs3.sfs/

wine-1.3.2-i486-sfs4.sfs (release 1)
http://www.wuala.com/version2013/Public ... -sfs4.sfs/

-----------------------------------------------------------------------------------------------------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
I specifically used the files:
puppies-431.1-main-Xserver.iso
devx_430.sfs

puppies-431.1-main-Xserver.iso - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

devx_430.sfs - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

-----------------------------------------------------------------------------------------------------------

Files located at http://puppylinux.asia/ require a login.
(Username=puppy) (Password=linux)

I installed these packages before compiling:

esound-0.2.41-i486.pet
http://puppylinux.asia/members/T/486_pe ... 1-i486.pet

esound_DEV-0.2.41-i486.pet
http://puppylinux.asia/members/T/486_pe ... 1-i486.pet

fontconfig-2.7.1-i486-pup4.pet
http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet

fontconfig_DEV-2.7.1-i486-pup4.pet
http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet

gnutls+deps-2.6.6-i486.pet
http://puppylinux.asia/members/T/444/gn ... 6-i486.pet

gnutls+deps_DEV-2.6.6-i486.pet
http://puppylinux.asia/members/T/444/gn ... 6-i486.pet

jack-audio-connection-kit-0.116.1-i486.pet
http://puppylinux.asia/members/T/444/ja ... 1-i486.pet

jack-audio-connection-kit_DEV-0.116.1-i486.pet
http://puppylinux.asia/members/T/444/ja ... 1-i486.pet

libgphoto2-2.4.6-pup4.pet
http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet

libgphoto2_DEV-2.4.6-pup4.pet
http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet

openldap-2.4.13-i486.pet
http://puppylinux.asia/members/T/444/op ... 3-i486.pet

openldap_DEV-2.4.13-i486.pet
http://puppylinux.asia/members/T/444/op ... 3-i486.pet

xorg_xorg_full_dri-7.3.pet
http://distro.ibiblio.org/pub/linux/dis ... ri-7.3.pet

xorg_xorg_full_dri_DEV-7.3.pet
http://distro.ibiblio.org/pub/linux/dis ... EV-7.3.pet

-----------------------------------------------------------------------------------------------------------

When compiling, I used Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' provided by forum member 'technosaurus'. The only changes I made to the contents of that file were to delete the file 'Wine_regedit.desktop'. That appears to be a duplicate file. I also deleted the file 'winetricks' and replaced it with the updated one.

For help with Gecko, look here

I use the console to install packages from winetricks. For help with this I use [source]

my graphics card is a Nvidia GeForce 8400GS, so I install the 'NVIDIA-190.42-k2.6.30.5-1.pet' from this post.

Dear green_dome,

Works nicely, as usual. Also, thanks for listing your compilation setup, your ./configure line and platform.

With kind regards,
vovchik

Also thanks again green_dome, if you ever wondered what people use wine for, this is what I use it for, I run openBVE (a trainsim and the best), it now out performs windoz which is Kool

youtube of your wine in action

http://www.youtube.com/watch?v=ObBtzaOCQqA

picture quality is a lot better when not recording at same time, I run at 1280x1024 normally but have to turn the wick down to do the capture.

thanks again LEZZ