Page 41 of 42
reply
Posted: Mon 03 Oct 2016, 21:27
by puppytahruser
no i have install it from usb iso image
Posted: Mon 03 Oct 2016, 21:39
by Semme
How about the boot manager.. Which one?
Do the files on your drive look like mine?
If you've got a "syslinux.cfg," dump it..
HERE!
rp
Posted: Mon 03 Oct 2016, 21:49
by puppytahruser
Thank you Semme for your help. But i feeling it to Give Up and also feeling sleepy now its 3:48 am here.Now I think I need to sleep
Ok take care ,bye.
Posted: Mon 03 Oct 2016, 21:55
by Semme
OK Champ!
Tmrw's another day..
solved
Posted: Tue 04 Oct 2016, 17:20
by puppytahruser
I have found a alternative way
For total use:
netstat --statistics --raw
For active net use
netstat -ie
Posted: Tue 04 Oct 2016, 17:44
by Semme
Bummer! I was kinda hoping you would test something for the community..
reply
Posted: Tue 04 Oct 2016, 18:31
by puppytahruser
Of-course, I am still trying to finding any simple Internet tool for puppy linux. If I got suitable one I will definitely post here.
Posted: Tue 04 Oct 2016, 18:31
by Semme
Could you comment on
this post then?
reply
Posted: Tue 04 Oct 2016, 18:41
by puppytahruser
yap definitely, I have bookmarked this forum post.
Posted: Tue 04 Oct 2016, 18:51
by Semme
That's not what I was asking. I asked about a bootloader.
Does your USB install look like mine? Is there a syslinux.cfg you could post?
update
Posted: Tue 04 Oct 2016, 19:55
by puppytahruser
here is new update I find vnstat which is nice tool for to see net use and its working nice for lucid puppy but not in tahr pup
discussion going on here>>
http://murga-linux.com/puppy/viewtopic. ... 940#926940
answer of your question
--i use default bootloder for lucid pup 528 and tahr pup
-- No, not similiar, no syslinux.cfg, only init,vmlin,one sfs and one 4fs file
Good news
Posted: Tue 04 Oct 2016, 20:04
by puppytahruser
Good news
vnstat is working on tahr pup. I had to rename the pet file then it successfully installed and now running
Broken Links in the Tahr64 Help
Posted: Thu 13 Oct 2016, 21:55
by Snail
The ASH link in the programming section points to Leaf, not ASH webpage.
The gtkdialog3 links are broken, except for zigbert's page.
The puppylinux.com/hard-puppy link is broken.
The puppylinux.com/development/create-pet.htm is broken.
Hope this is helpful.
Posted: Sun 13 Nov 2016, 14:25
by number77
Hello
I am having problems with 1280x1024 resolution and intel 82Q35 express integrated graphics controller. Its on a dell optiplex 755, dual core 2ghz,2gb ram.
I realy like tahr so want it to work.
Tahr 605 with kernel 56 works on everything, except 1280x1024 res.
If I put on 3.4.103 kernel I get 1280x1024 but no network adapters at all.
Any chance of a fix for this please as tahr to me is by far the best.
Thanks
number77
Posted: Sun 13 Nov 2016, 15:10
by Semme
Which network adapters does 605 say are in use?
Posted: Sun 13 Nov 2016, 15:31
by number77
Pupsysinfo says [0200]: intel corporation 82566dm-2 gigabit network connection [8086:10db]
Posted: Sun 13 Nov 2016, 18:09
by Semme
From the Tahr with a working network connection..
Copy'n paste from >> PupSysInfo >> Devices >> Network. Goto "File" >> Export current report.
Then >> Drivers >> Reports >> "Summary" and do the same.
PS -- It's helpful to know when
you've posted elsewhere.
PSS -- On the version that network doesn't fly, do you see the same file/folders in my screen shot?
Posted: Mon 14 Nov 2016, 10:18
by number77
This may come out
Working
====> 43 Loaded Kernel Modules (lsmod) <====
Total Memory Used: 1421.89 KB
MODULE: BYTES USED BY
cfg80211 133384 0
coretemp 3984 0
drm 145780 3 i915,drm_kms_helper
drm_kms_helper 23752 1 i915
dvb_core 53384 2 dvb_usb_ttusb2,dvb_usb
dvb_usb 10708 1 dvb_usb_ttusb2
dvb_usb_ttusb2 11816 0
e1000e 124404 0
hwmon 1328 1 coretemp
hwmon_vid 1588 0
i2c_algo_bit 3456 1 i915
i2c_i801 6904 0
i915 491840 2
intel_agp 7072 0
intel_gtt 7248 3 i915,intel_agp
ip_tables 7228 1 iptable_filter
iptable_filter 700 0
lpc_ich 11052 0
parport 18924 1 parport_pc
parport_pc 17032 0
pps_core 3976 1 ptp
psmouse 56825 0
ptp 4692 1 e1000e
rc_core 7904 2 dvb_usb_ttusb2,dvb_usb
rfkill 5402 1 cfg80211
snd 29832 12 snd_hda_codec_generic,snd_hda_intel,snd_hda_codec_analog
snd_hda_codec_analog 5056 1
snd_hda_codec_generic 28868 1 snd_hda_codec_analog
snd_hda_intel 22516 0
snd_mixer_oss 8668 1 snd_pcm_oss
snd_pcm 45956 4 snd_pcm_oss,snd_hda_codec,snd_hda_intel,snd_pcsp
snd_pcm_oss 24016 0
snd_pcsp 4241 0
snd_rawmidi 10304 1 snd_seq_midi
snd_seq 26592 6 snd_seq_midi_event,snd_seq_oss,snd_seq_dummy,snd_seq_midi
snd_seq_device 2924 5 snd_seq,snd_rawmidi,snd_seq_oss,snd_seq_dummy,snd_seq_midi
snd_seq_dummy 605 0
snd_seq_midi 2864 0
snd_seq_midi_event 2760 2 snd_seq_oss,snd_seq_midi
snd_seq_oss 15932 0
snd_timer 10302 2 snd_pcm,snd_seq
video 8814 1 i915
Non working
Has nothing in at all
Working Ethernet
====> Network Devices <====
Ethernet controller [0200]: Intel Corporation 82566DM-2 Gigabit Network Connection [8086:10bd] (rev 02)
+ Kernel Driver: e1000e
+ Memory Used: 121.49 KB
+ Path: /lib/modules/3.14.56/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
+ Driver Version: 2.3.2-k
+ Description: Intel(R) PRO/1000 Network Driver
Non working
====> Network Devices <====
Ethernet controller [0200]: Intel Corporation 82566DM-2 Gigabit Network Connection [8086:10bd] (rev 02)
Posted: Mon 14 Nov 2016, 10:23
by number77
semme
My files do look different
Posted: Mon 14 Nov 2016, 11:59
by Semme
The driver's there, though not where I'd expect it. For whatever reason it's not loading.
Boot your 3.4.103 kernel system, dump both of the reports I requested and place them somewhere on your "home" partition so you can retrieve them from one of your systems where Internet works. It's otherwise impossible to tell what's loading from a system that isn't under boot.
*Small favor.. Thank you.