I didn't talk about how to use it or how to install it, or if it is recommended or not. I talk about a bug, that's all.watchdog wrote:I do not recommend using pulseaudio in puppy but I did some experiments.
Xenialpup64 CE 7.5 / 25 Nov 2017
I do not think it's a bug: puppy does not use pulseaudio but some libs (example libpulse) are required so PPM declares pulseaudio installed but it's not the full pulseaudio: only what makes puppy working with alsa.linuxcbon wrote: I didn't talk about how to use it or how to install it, or if it is recommended or not. I talk about a bug, that's all.
apache server
Rockedge, Thank You for the feedback. That gives me the lay-of-the-land.rockedge wrote:I have set up hundreds of Apache servers on Puppy Linux. Xenial runs a LAMP server very well.
I always select ALL in /etc/apache2/conf-avialable and SYM-LINK them in conf-enabled.
This I also must do to /etc/apache2/mods-avialable. With the mods be sure to disable mpm-worker and mpm-events by removing the symlinks in mods-enabled.
be sure to also enable the sites config in /etc/apache2/sites-enabled.
look up the utility a2enmod and a2dismod ...I just manually create the needed symlinks.... on Ubuntu the install does do some of these tasks in Puppy Linux I have only found the manual way to work 100%
Xenialpup64 7.5
I installed steam from quickpet -- fun , and it says :
I installed 32 bit compatibility libraries sfs and then I got the same error.
What did I miss ?
----
OK I solved it by running
after loading the sfs libraries.
I installed steam from quickpet -- fun , and it says :
Code: Select all
root# steam
Setting up Steam content in /root/.local/share/Steam
File "/usr/bin/steamdeps", line 367
^
SyntaxError: EOF while scanning triple-quoted string literal
Running Steam on puppy_xenialpup64 7.5 64-bit
STEAM_RUNTIME is enabled automatically
Error: You are missing the following 32-bit libraries, and Steam may not run:
libstdc++.so.6
/root/.local/share/Steam/ubuntu12_32/steam: error while loading shared libraries: libstdc++.so.6: wrong ELF class: ELFCLASS64
/root/.local/share/Steam/steam.sh: line 444: no match: ssfn*
What did I miss ?
----
OK I solved it by running
Code: Select all
#ldconfig
- pp4mnklinux
- Posts: 375
- Joined: Fri 23 Aug 2013, 06:56
Is it possible to install COMPIZ FUSSION IN XENIAL PUP?
Hello every body:
Is it possible to install compiz fussion in xenial pup?
if "Yes" How must I do it?
THANKY
Is it possible to install compiz fussion in xenial pup?
if "Yes" How must I do it?
THANKY
Distro: xenialpup64 7.5 XXL
Desktop Panel: JWM ~ FbBox 5.0
Desktop Panel: JWM ~ FbBox 5.0
Xenialpup64 CE 7.5 / 25 Nov 2017
New install of xenialpup64 to a 64gb flash drive:
System: Host: puppypc5044 Kernel: 4.9.113 x86_64 (64 bit) Desktop: JWM 2.3.7 Distro: xenialpup64 7.5
Machine: Mobo: Acer model: Aspire X3950 serial: U02C120500059
Bios: American Megatrends v: P01-A3 date: 05/05/2010
CPU: Dual core Intel Core i3 540 (-HT-MCP-) speed/max: 1200/3067 MHz
Graphics: Card: Intel Core Processor Integrated Graphics Controller
Display Server: X.org 1.18.4 drivers: intel (unloaded: fbdev,vesa)
tty size: 116x25 Advanced Data: N/A for root
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
Drives: HDD Total Size: 563.2GB (1.6% used)
Weather: Conditions: 82 F (28 C) - Partly Cloudy Time: July 17, 3:09 PM EDT
Info: Processes: 186 Uptime: 1:19 Memory: 267.7/5895.4MB Client: Shell (bash) inxi: 2.2.35
Added some applications with PPM, also downloaded and added the Kodi
sfs from the ibiblio puppy linux website.
Compiled the newest kernel and changed to that.
Working well so far,
Thanks.
EDIT: I took a shortcut to install xenialpup64 to a 32gb flash drive by
booting Slacko64,preparing the drive with gparted,then copying the
xenialpup64 savefile to the 32gb flash drive and running grub4dos to
the 32gb drive only.
System: Host: puppypc5044 Kernel: 4.9.113 x86_64 (64 bit) Desktop: JWM 2.3.7 Distro: xenialpup64 7.5
Machine: System: Hewlett-Packard product: HPE-410f serial: MXX0370KF3
Mobo: FOXCONN model: 2AB1 v: 1.00 Bios: American Megatrends v: 6.02 date: 07/21/2010
CPU: Hexa core AMD Phenom II X6 1045T (-MCP-) speed/max: 1400/2700 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] Redwood PRO [Radeon HD 5550/5570/5630/6510/6610/7570]
Display Server: X.org 1.18.4 driver: radeon tty size: 124x24 Advanced Data: N/A for root
Network: Card-1: Ralink RT3090 Wireless 802.11n 1T/1R PCIe driver: rt2800pci
Card-2: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller driver: r8169
Drives: HDD Total Size: 1031.7GB (1.0% used)
Weather: Conditions: 77 F (25 C) - Mostly Cloudy Time: July 17, 9:03 PM EDT
Info: Processes: 205 Uptime: 58 min Memory: 274.5/7984.2MB Client: Shell (bash) inxi: 2.2.35
On first boot I had to run xorgwizard to setup the graphics, also
changed a couple of other settings.
Working well on this pc too.
System: Host: puppypc5044 Kernel: 4.9.113 x86_64 (64 bit) Desktop: JWM 2.3.7 Distro: xenialpup64 7.5
Machine: Mobo: Acer model: Aspire X3950 serial: U02C120500059
Bios: American Megatrends v: P01-A3 date: 05/05/2010
CPU: Dual core Intel Core i3 540 (-HT-MCP-) speed/max: 1200/3067 MHz
Graphics: Card: Intel Core Processor Integrated Graphics Controller
Display Server: X.org 1.18.4 drivers: intel (unloaded: fbdev,vesa)
tty size: 116x25 Advanced Data: N/A for root
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
Drives: HDD Total Size: 563.2GB (1.6% used)
Weather: Conditions: 82 F (28 C) - Partly Cloudy Time: July 17, 3:09 PM EDT
Info: Processes: 186 Uptime: 1:19 Memory: 267.7/5895.4MB Client: Shell (bash) inxi: 2.2.35
Added some applications with PPM, also downloaded and added the Kodi
sfs from the ibiblio puppy linux website.
Compiled the newest kernel and changed to that.
Working well so far,
Thanks.
EDIT: I took a shortcut to install xenialpup64 to a 32gb flash drive by
booting Slacko64,preparing the drive with gparted,then copying the
xenialpup64 savefile to the 32gb flash drive and running grub4dos to
the 32gb drive only.
System: Host: puppypc5044 Kernel: 4.9.113 x86_64 (64 bit) Desktop: JWM 2.3.7 Distro: xenialpup64 7.5
Machine: System: Hewlett-Packard product: HPE-410f serial: MXX0370KF3
Mobo: FOXCONN model: 2AB1 v: 1.00 Bios: American Megatrends v: 6.02 date: 07/21/2010
CPU: Hexa core AMD Phenom II X6 1045T (-MCP-) speed/max: 1400/2700 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] Redwood PRO [Radeon HD 5550/5570/5630/6510/6610/7570]
Display Server: X.org 1.18.4 driver: radeon tty size: 124x24 Advanced Data: N/A for root
Network: Card-1: Ralink RT3090 Wireless 802.11n 1T/1R PCIe driver: rt2800pci
Card-2: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller driver: r8169
Drives: HDD Total Size: 1031.7GB (1.0% used)
Weather: Conditions: 77 F (25 C) - Mostly Cloudy Time: July 17, 9:03 PM EDT
Info: Processes: 205 Uptime: 58 min Memory: 274.5/7984.2MB Client: Shell (bash) inxi: 2.2.35
On first boot I had to run xorgwizard to setup the graphics, also
changed a couple of other settings.
Working well on this pc too.
- Attachments
-
- screenshot2.jpg
- (96.73 KiB) Downloaded 1029 times
-
- screenshot.jpg
- (75.92 KiB) Downloaded 1064 times
Xenialpup64 CE 7.5 / 25 Nov 2017
I used the same shortcut as in the above post to install to a 32GB
SDHC card:
System: Host: puppypc5044 Kernel: 4.9.113 x86_64 (64 bit) Desktop: JWM 2.3.7 Distro: xenialpup64 7.5
Machine: System: Acer product: Aspire R3610 serial: PTSCX0205302001AC12700
Mobo: Acer model: FMCP7A-ION-LE serial: U020102009703
Bios: American Megatrends v: P01-A4 date: 11/03/2009
CPU: Dual core Intel Atom 330 (-HT-MCP-) speed/max: 1599/1600 MHz
Graphics: Card: NVIDIA ION VGA
Display Server: X.org 1.18.4 drivers: nouveau (unloaded: fbdev,vesa)
tty size: 105x26 Advanced Data: N/A for root
Network: Card-1: NVIDIA MCP79 Ethernet driver: forcedeth
Card-2: Ralink RT3090 Wireless 802.11n 1T/1R PCIe driver: rt2800pci
Drives: HDD Total Size: 192.1GB (3.8% used)
Weather: Conditions: 68 F (20 C) - Partly Cloudy Time: July 19, 10:47 PM EDT
Info: Processes: 181 Uptime: 1:07 Memory: 219.9/1496.4MB Client: Shell (bash) inxi: 2.2.35
The nouveau driver is working well, sound configured and worked fine
with Kodi but had trouble with Vlc so I'm using an usb sound card that
works well with both.
Thanks.
EDIT:
video-info-glx 1.5.3 Fri 20 Jul 2018 on xenialpup64 7.5 Linux 4.9.113 x86_64
0.0 VGA compatible controller: NVIDIA Corporation ION VGA (rev b1)
oem: NVIDIA
product: MCP79 Board - hornet-0 Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.18.4
dimensions: 1600x900 pixels (442x251 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: ION/integrated/SSE2
OpenGL core profile version string: 3.3.0 NVIDIA 340.107
Intel(R) Atom(TM) CPU 330 @ 1.60GHz
Core 0: @1599 1: @1599 2: @1599 3: @1599 MHz
I decided to try the proprietary driver so downloaded and compiled the
newest.
The processor uses less resources when streaming video and runs cooler
as well.
Edit: I updated the kernel and loaded the new kernel sources sfs, then compiled the nvidia driver again.
SDHC card:
System: Host: puppypc5044 Kernel: 4.9.113 x86_64 (64 bit) Desktop: JWM 2.3.7 Distro: xenialpup64 7.5
Machine: System: Acer product: Aspire R3610 serial: PTSCX0205302001AC12700
Mobo: Acer model: FMCP7A-ION-LE serial: U020102009703
Bios: American Megatrends v: P01-A4 date: 11/03/2009
CPU: Dual core Intel Atom 330 (-HT-MCP-) speed/max: 1599/1600 MHz
Graphics: Card: NVIDIA ION VGA
Display Server: X.org 1.18.4 drivers: nouveau (unloaded: fbdev,vesa)
tty size: 105x26 Advanced Data: N/A for root
Network: Card-1: NVIDIA MCP79 Ethernet driver: forcedeth
Card-2: Ralink RT3090 Wireless 802.11n 1T/1R PCIe driver: rt2800pci
Drives: HDD Total Size: 192.1GB (3.8% used)
Weather: Conditions: 68 F (20 C) - Partly Cloudy Time: July 19, 10:47 PM EDT
Info: Processes: 181 Uptime: 1:07 Memory: 219.9/1496.4MB Client: Shell (bash) inxi: 2.2.35
The nouveau driver is working well, sound configured and worked fine
with Kodi but had trouble with Vlc so I'm using an usb sound card that
works well with both.
Thanks.
EDIT:
video-info-glx 1.5.3 Fri 20 Jul 2018 on xenialpup64 7.5 Linux 4.9.113 x86_64
0.0 VGA compatible controller: NVIDIA Corporation ION VGA (rev b1)
oem: NVIDIA
product: MCP79 Board - hornet-0 Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.18.4
dimensions: 1600x900 pixels (442x251 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: ION/integrated/SSE2
OpenGL core profile version string: 3.3.0 NVIDIA 340.107
Intel(R) Atom(TM) CPU 330 @ 1.60GHz
Core 0: @1599 1: @1599 2: @1599 3: @1599 MHz
I decided to try the proprietary driver so downloaded and compiled the
newest.
The processor uses less resources when streaming video and runs cooler
as well.
Edit: I updated the kernel and loaded the new kernel sources sfs, then compiled the nvidia driver again.
- Attachments
-
- screenshot2.jpg
- (100 KiB) Downloaded 812 times
-
- screenshot.jpg
- (70.43 KiB) Downloaded 959 times
Last edited by Billtoo on Wed 25 Jul 2018, 02:52, edited 2 times in total.
Xenialpup64 CE 7.5 / 25 Nov 2017
I did a new install to a usb-3.0 SSD, computer is a Macmini:
video-info-glx 1.5.3 Sat 21 Jul 2018 on xenialpup64 7.5 Linux 4.9.113 x86_64
2.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
oem: Intel(R) Sandybridge/Ivybridge Graphics Chipset Accelerated VGA BIOS
product: Intel(R) Sandybridge/Ivybridge Graphics Controller Hardware Version 0.0
X Server: Xorg Driver: evdev
X.Org version: 1.18.4
dimensions: 3840x1080 pixels (1013x285 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile
OpenGL core profile version string: 3.3 (Core Profile) Mesa 17.0.7
Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz
Core 0: @1200 1: @1200 2: @1300 3: @1200 MHz
I changed kernels to the newest,added applications with PPM.
It's working great, there is an annoying bug (up arrow key triggers mtpaint), I know that there is a
fix for this bug but have to do more reading to find it.
Also had to add intel_pstate=disable to the menu.lst file.
Thanks.
video-info-glx 1.5.3 Sat 21 Jul 2018 on xenialpup64 7.5 Linux 4.9.113 x86_64
2.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
oem: Intel(R) Sandybridge/Ivybridge Graphics Chipset Accelerated VGA BIOS
product: Intel(R) Sandybridge/Ivybridge Graphics Controller Hardware Version 0.0
X Server: Xorg Driver: evdev
X.Org version: 1.18.4
dimensions: 3840x1080 pixels (1013x285 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile
OpenGL core profile version string: 3.3 (Core Profile) Mesa 17.0.7
Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz
Core 0: @1200 1: @1200 2: @1300 3: @1200 MHz
I changed kernels to the newest,added applications with PPM.
It's working great, there is an annoying bug (up arrow key triggers mtpaint), I know that there is a
fix for this bug but have to do more reading to find it.
Also had to add intel_pstate=disable to the menu.lst file.
Thanks.
- Attachments
-
- screenshot.jpg
- (29.29 KiB) Downloaded 902 times
- koulaxizis
- Posts: 452
- Joined: Sun 17 Jul 2011, 18:43
- Location: Greece
- Contact:
Hello everyone!
Fisrt of all, thank you very much for this great release, absolutely loved it!!
Not sure if anyone came across those issues, so I'm gonna report them anyway! :p
- Missing battery icon. There is just a "blank placeholder" where the battery icon should appear. If I hover it, I can view the battery status, right-click it etc, but there is no icon at all.
- Missing Steam icon. There is just a white icon with an "X" symbol on it. Just like the above case, I can fully interact when I hover it, but there is no actual Steam icon.
- False Pplog shortcut. If you start the Hiawatha server and then press PPLOG to start, you will get the "Puppy Printing" window instead of PPLOG.
- Keyboard configuration error. I added a second layout, choose the variant, choose the toggle setting, works fine until I reboot the system. I have to set it up all over again each time.
That's all for now. If you can help me somehow with the above issues (especially the last one, it's frustrating), I'd be grateful!
Fisrt of all, thank you very much for this great release, absolutely loved it!!
Not sure if anyone came across those issues, so I'm gonna report them anyway! :p
- Missing battery icon. There is just a "blank placeholder" where the battery icon should appear. If I hover it, I can view the battery status, right-click it etc, but there is no icon at all.
- Missing Steam icon. There is just a white icon with an "X" symbol on it. Just like the above case, I can fully interact when I hover it, but there is no actual Steam icon.
- False Pplog shortcut. If you start the Hiawatha server and then press PPLOG to start, you will get the "Puppy Printing" window instead of PPLOG.
- Keyboard configuration error. I added a second layout, choose the variant, choose the toggle setting, works fine until I reboot the system. I have to set it up all over again each time.
That's all for now. If you can help me somehow with the above issues (especially the last one, it's frustrating), I'd be grateful!
[b]Christos Koulaxizis[/b]
[i]Woof woof from Greece![/i]
[color=darkred][url=https://sourceforge.net/projects/puppystuff/][ Puppy Stuff Repository ][/url][/color]
[i]Woof woof from Greece![/i]
[color=darkred][url=https://sourceforge.net/projects/puppystuff/][ Puppy Stuff Repository ][/url][/color]
Try this.Keyboard configuration error. I added a second layout, choose the variant, choose the toggle setting, works fine until I reboot the system. I have to set it up all over again each time.
Go to startup directory.
Inside there is the disabled directory.
Open the disabled directory.
There is a file keyboardlayoutfix
Move this file to the startup directory.
Reboot.
Now try your keyboard setup
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
About the icons.
Have you changed icons set being used?
Have you changed icons set being used?
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
- koulaxizis
- Posts: 452
- Joined: Sun 17 Jul 2011, 18:43
- Location: Greece
- Contact:
Tried that after doing some search on the forum. No luck, unfortunately.Go to startup directory.
Inside there is...
Also tried! Same result. Not a big deal though, I can live with that!About the icons.
Have you changed icons set being used?
Thank toy for the suggestions!!
[b]Christos Koulaxizis[/b]
[i]Woof woof from Greece![/i]
[color=darkred][url=https://sourceforge.net/projects/puppystuff/][ Puppy Stuff Repository ][/url][/color]
[i]Woof woof from Greece![/i]
[color=darkred][url=https://sourceforge.net/projects/puppystuff/][ Puppy Stuff Repository ][/url][/color]
Xenialpup64 CE 7.5 / 25 Nov 2017
I moved this install from the SDHC card to the 2nd partition of the
hard drive and ran grub4dos,dual boots with Slacko64.
video-info-glx 1.5.3 Fri 27 Jul 2018 on xenialpup64 7.5 Linux 4.9.115 x86_64
0.0 VGA compatible controller: NVIDIA Corporation ION VGA (rev b1)
oem: NVIDIA
product: MCP79 Board - hornet-0 Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.18.4
dimensions: 1600x900 pixels (442x251 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: ION/integrated/SSE2
OpenGL core profile version string: 3.3.0 NVIDIA 340.107
Intel(R) Atom(TM) CPU 330 @ 1.60GHz
Core 0: @1599 1: @1599 2: @1599 3: @1599 MHz
Updated kernel and re-installed the proprietary nvidia driver, also
switched to gkrellm from conky.
Works better from the hard drive.
hard drive and ran grub4dos,dual boots with Slacko64.
video-info-glx 1.5.3 Fri 27 Jul 2018 on xenialpup64 7.5 Linux 4.9.115 x86_64
0.0 VGA compatible controller: NVIDIA Corporation ION VGA (rev b1)
oem: NVIDIA
product: MCP79 Board - hornet-0 Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.18.4
dimensions: 1600x900 pixels (442x251 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: ION/integrated/SSE2
OpenGL core profile version string: 3.3.0 NVIDIA 340.107
Intel(R) Atom(TM) CPU 330 @ 1.60GHz
Core 0: @1599 1: @1599 2: @1599 3: @1599 MHz
Updated kernel and re-installed the proprietary nvidia driver, also
switched to gkrellm from conky.
Works better from the hard drive.
- Attachments
-
- screenshot.jpg
- (113.63 KiB) Downloaded 694 times
- Mike Walsh
- Posts: 6351
- Joined: Sat 28 Jun 2014, 12:42
- Location: King's Lynn, UK.
Evening, all.
I stated, quite early on in this thread, that I'd given Xenialpup64 a try, and.....well, I had problems with it. Multiple problems, in fact.
(This was back somewhere around version 7.0.8.1, or something like that. My Tahr64, getting somewhat long in the tooth nowadays, though still a darn good Pup, needs.....supplementing. With something a bit more modern.)
So; here we are, with Xenialpup64 7.5. And.....my goodness. What a difference! Running from a sub-directory on the big old Compaq's data drive, and using a save-file, formatted to ext3. (I've eschewed the save-folders. They might have their advantages in some ways, but they take an unholy long time to back-up. Save-files are much quicker.....and so long as you run pfix=fsck at boot, it'll usually nip any 'corruption' in the bud.)
I've got no reservations with it at all now. None whatsoever.
Wine; installed without a hitch from Quickpet. Likewise several other items. And everything's working as it should.
And, of course, it'll give me the chance to run a lot of AppImages, since they're almost all 64-bit nowadays.....
----------------------------------------------------
I've kinda lost track of just exactly who's working on it nowadays (I believe it was Phil's baby, originally).....but whoever it is, congratulations are definitely in order. Well done, whoever you are!
Posting this from my newly-produced Chrome 68 package.
Nice one.
Mike.
I stated, quite early on in this thread, that I'd given Xenialpup64 a try, and.....well, I had problems with it. Multiple problems, in fact.
(This was back somewhere around version 7.0.8.1, or something like that. My Tahr64, getting somewhat long in the tooth nowadays, though still a darn good Pup, needs.....supplementing. With something a bit more modern.)
So; here we are, with Xenialpup64 7.5. And.....my goodness. What a difference! Running from a sub-directory on the big old Compaq's data drive, and using a save-file, formatted to ext3. (I've eschewed the save-folders. They might have their advantages in some ways, but they take an unholy long time to back-up. Save-files are much quicker.....and so long as you run pfix=fsck at boot, it'll usually nip any 'corruption' in the bud.)
I've got no reservations with it at all now. None whatsoever.
Wine; installed without a hitch from Quickpet. Likewise several other items. And everything's working as it should.
And, of course, it'll give me the chance to run a lot of AppImages, since they're almost all 64-bit nowadays.....
----------------------------------------------------
I've kinda lost track of just exactly who's working on it nowadays (I believe it was Phil's baby, originally).....but whoever it is, congratulations are definitely in order. Well done, whoever you are!
Posting this from my newly-produced Chrome 68 package.
Nice one.
Mike.
Xenialpup64 CE 7.5 / 25 Nov 2017
Still working well here.
- Attachments
-
- screenshot.jpg
- (112.64 KiB) Downloaded 1354 times
- Mike Walsh
- Posts: 6351
- Joined: Sat 28 Jun 2014, 12:42
- Location: King's Lynn, UK.
Morning, all.
Just for reference, so that y'all know, the included YAD binary in /usr/bin appears to be broken in the ISO download. I've noticed that it won't display certain YAD icons correctly (comes up with the wee text-icon picture, with an 'X' on it, instead).
Running the version check from the terminal indicates that the sym-link from /usr/lib/gdk-pixbuf-2.0/2.10.0 loaders.cache to /etc/gtk-2.0/gdk-pixbuf.loaders is broken. This is generated by YAD at boot time.
Accordingly, I've compiled & packaged a new version of the current yad-0.40, which appears to have fixed the issue. Anybody needs it, you can find the .pet package here:-
http://www.mediafire.com/file/gelu66iht ... 4.pet/file
Mike.
Just for reference, so that y'all know, the included YAD binary in /usr/bin appears to be broken in the ISO download. I've noticed that it won't display certain YAD icons correctly (comes up with the wee text-icon picture, with an 'X' on it, instead).
Running the version check from the terminal indicates that the sym-link from /usr/lib/gdk-pixbuf-2.0/2.10.0 loaders.cache to /etc/gtk-2.0/gdk-pixbuf.loaders is broken. This is generated by YAD at boot time.
Accordingly, I've compiled & packaged a new version of the current yad-0.40, which appears to have fixed the issue. Anybody needs it, you can find the .pet package here:-
http://www.mediafire.com/file/gelu66iht ... 4.pet/file
Mike.
Re: taskbar/traybar bug in the icons
Tangential, but how do you get rid of the one that looks like a moving histogram? Is that charting the CPU usage? Anyway, I can find no way to close it, and I don't know what it's called.tenochslb wrote: A screencast showing the buggy behavior
A quick right click, on a tray icon, will usually close most of the icons.right click over the taskbar icons closes them, xenialpup, tahrpup
Normal operation.
Right click and hold right mouse button down on an icon.
That will make a menu pop up.
Still holding the right mouse button down.
Navigate the menu and release the right button, when the pointer is over a menu item you want to select.
Last edited by bigpup on Mon 06 Aug 2018, 10:48, edited 1 time in total.
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
That is xload.how do you get rid of the one that looks like a moving histogram? Is that charting the CPU usage? Anyway, I can find no way to close it, and I don't know what it's called.
It basically shows the system usage as stuff is running.
the number of processes that want to use the cpu.
However, it is not showing CPU usage, but overall system usage.
It is not a bad thing to watch for.
How much load you are putting on the overall system.
If you rally want to get ride of it.
It is an entry in the file that configures the tray.
/root/.jwmrc.tray
This is a hidden file.
Open in text editor.
Remove the entry for xload.
However, all the tray icons are there for some good reasons.
They all provide useful info and stuff you will find you need to know, as you use Puppy.
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)