YaPI (yet another Puppy Installer) install any Puppy iso
sheldonisaac,
What Puppy version are you using?
What install were you doing using Yapi?
Did it do the selected install OK?
I assume what you posted was displayed by running Yapi in a terminal.
What Puppy version are you using?
What install were you doing using Yapi?
Did it do the selected install OK?
I assume what you posted was displayed by running Yapi in a terminal.
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
-
- Posts: 902
- Joined: Mon 22 Jun 2009, 01:36
- Location: Philadelphia, PA
Not sure, probably the new 64-bit Bionic Pupbigpup wrote:sheldonisaac,
What Puppy version are you using?
What install were you doing using Yapi?
Did it do the selected install OK?
I assume what you posted was displayed by running Yapi in a terminal.
I just typed yapi in a terminal. Now think that was not how to use it. Will go back and read the thread. Please excuse me.
Dell E6410: BusterPup, BionicPup64, Xenial, etc
Intel DQ35JOE, Dell Vostro 430
Dell Inspiron, Acer Aspire One, EeePC 1018P
Intel DQ35JOE, Dell Vostro 430
Dell Inspiron, Acer Aspire One, EeePC 1018P
sheldonisaac,
I just re-posted the pet for YaPI 180921
http://www.murga-linux.com/puppy/viewto ... &id=119199
Could you delete the one you have and replace it with this one. Fixed a minor problem with the pet package.
I just re-posted the pet for YaPI 180921
http://www.murga-linux.com/puppy/viewto ... &id=119199
Could you delete the one you have and replace it with this one. Fixed a minor problem with the pet package.
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
-
- Posts: 902
- Joined: Mon 22 Jun 2009, 01:36
- Location: Philadelphia, PA
I hope this is it?bigpup wrote:sheldonisaac,
I just re-posted the pet for YaPI 180921
http://www.murga-linux.com/puppy/viewto ... &id=119199
Could you delete the one you have and replace it with this one. Fixed a minor problem with the pet package.
Code: Select all
-rw-r--r-- 1 root root 27841 Sep 22 22:34 yapi-180921.pet
1f2bda8b2dae6147fdd33a72f692e53f yapi-180921.pet
Using musher0's 32-bit Xenial puppy.
Code: Select all
Linux puppypc2261 4.1.2-EmSee-32-pae #1 SMP Wed Jul 15 12:39:34 BST 2015 i686 i686 i686 GNU/Linux
Dell E6410: BusterPup, BionicPup64, Xenial, etc
Intel DQ35JOE, Dell Vostro 430
Dell Inspiron, Acer Aspire One, EeePC 1018P
Intel DQ35JOE, Dell Vostro 430
Dell Inspiron, Acer Aspire One, EeePC 1018P
- Argolance
- Posts: 3767
- Joined: Sun 06 Jan 2008, 22:57
- Location: PORT-BRILLET (Mayenne - France)
- Contact:
Bonjour,
Be aware!
I just tested another program than yapi on puppy_tahr_6.0.5 and I noticed that the yaf-splash/gtkdialog-splash of previous Puppy versions has been replaced by /usr/lib/gtkdialog/box_splash, presented as "compatible" with the ancestor but which in reality is not quite . In some cases, the display is erratic (huge window that occupies almost the entire desktop!).
The old yaf-splash is not affected by the box_splash options. It simply does not "see" them. However, these options seem essential (such as the width of the icon for example), so they have to be set.
To be investigated further...
Cordialement.
Be aware!
I just tested another program than yapi on puppy_tahr_6.0.5 and I noticed that the yaf-splash/gtkdialog-splash of previous Puppy versions has been replaced by /usr/lib/gtkdialog/box_splash, presented as "compatible" with the ancestor but which in reality is not quite . In some cases, the display is erratic (huge window that occupies almost the entire desktop!).
The old yaf-splash is not affected by the box_splash options. It simply does not "see" them. However, these options seem essential (such as the width of the icon for example), so they have to be set.
To be investigated further...
Cordialement.
- kiramm
- Posts: 502
- Joined: Fri 06 May 2016, 05:00
- Location: http://murga-linux.com/puppy/viewtopic. ... 393#988393
i wanted to get puppy on usb
on usb was already xenial done with unetin..
and nothing happened xenial still there at boot up
see pics
what i do understand wrong?
i used the 1st and last version 2 differe usb
always same result
scaning takes verry lot time maybe would be good extra option one can look
alone faster to right place for iso...
i use slackouefi632
which are other usb installers to try?
on usb was already xenial done with unetin..
and nothing happened xenial still there at boot up
see pics
what i do understand wrong?
i used the 1st and last version 2 differe usb
always same result
scaning takes verry lot time maybe would be good extra option one can look
alone faster to right place for iso...
i use slackouefi632
which are other usb installers to try?
If Unetbootin did the install of Xenialpup the USB flash drive is setup by Unetbootin.on usb was already xenial done with unetin..
YaPI can not change that.
YaPi is made to do installs to a USB flash drive that has not been used by another installer program.
Start with a freshly partitioned and formatted flash drive that has nothing on it.
Fat32 is OK for format
(the way new USB flash drives come pre- formatted)
Already does it.scaning takes verry lot time maybe would be good extra option one can look
alone faster to right place for iso...
Do not start YaPI.
In Rox file manager.
Navigate to the iso you want to install.
Right click on it.
From right click menu select YaPI or select open with... YaPI.
YaPI will start at selection Window asking where to install the iso.
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
- kiramm
- Posts: 502
- Joined: Fri 06 May 2016, 05:00
- Location: http://murga-linux.com/puppy/viewtopic. ... 393#988393
it s written in yapi that ... it will be formated
anyway i formated king.. usb with king..format tool in windows
i tried this time other pc where xthar
to put slacko on usb
i used right click to open yapi
worked:)
end result was same
the format didn t help:(
what is to do?
came that print out
which format program for fat32 i should use ?
anyway i formated king.. usb with king..format tool in windows
i tried this time other pc where xthar
to put slacko on usb
i used right click to open yapi
worked:)
end result was same
the format didn t help:(
what is to do?
came that print out
which format program for fat32 i should use ?
Last edited by kiramm on Mon 08 Oct 2018, 18:18, edited 1 time in total.
At the final step of using YaPI.
Did you run Grub4dos config and put this boot loader on the USB flash drive?
Tell it to search only on the USB flash drive?
This should setup the USB flash drive to boot using Grub4dos boot loader and make a menu to select from at boot-up.
To partition and format.
I always use Gparted running in a Puppy version.
I do not think how you formatted is your problem.
Fat 32 is a very basic format any program should do OK.
Example of what should be on USB flash drive after using YaPI.
This is an install of Bionicpup64 7.9.5
Did you run Grub4dos config and put this boot loader on the USB flash drive?
Tell it to search only on the USB flash drive?
This should setup the USB flash drive to boot using Grub4dos boot loader and make a menu to select from at boot-up.
To partition and format.
I always use Gparted running in a Puppy version.
I do not think how you formatted is your problem.
Fat 32 is a very basic format any program should do OK.
Example of what should be on USB flash drive after using YaPI.
This is an install of Bionicpup64 7.9.5
- Attachments
-
- capture17042.png
- (18.49 KiB) Downloaded 408 times
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
If you are talking about what you show in posted image yaps4.end result was same.
came that print out
I have no idea why you would get that.
Nothing in YaPI should make that window output.
yapi is coded to work in Official Puppies.i tried this time other pc where xthar
xthar being a derivative of Tahrpup 6.0.5.
Maybe something needed is not in xtahr
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
- Argolance
- Posts: 3767
- Joined: Sun 06 Jan 2008, 22:57
- Location: PORT-BRILLET (Mayenne - France)
- Contact:
Bonjour,
Today, I wanted to test "yaf-splash" because of the strange behavior reported above. I installed successfully and very quickly slacko-6.3.0, xenialpup-7.5, stretch-7.5, tahr-6.0.5 from iso files with YaPi ("Open with" right click menu), and all went right, provided that I adapt the menu.lst accordingly:
Now, and this is the reason of this post: I noticed (and confirm) something very annoying. None of these Puppy versions that have /usr/lib/gtkdialog/box_splash instead of the previous /usr/bin/gtkdialog-splash support animated gif icons.
I don't know exactly where to report the issue but I think it is important that this be done!
[EDIT]: Done! /usr/lib/gtkdialog/box_splash and animated gif icons?
Cordialement.
Today, I wanted to test "yaf-splash" because of the strange behavior reported above. I installed successfully and very quickly slacko-6.3.0, xenialpup-7.5, stretch-7.5, tahr-6.0.5 from iso files with YaPi ("Open with" right click menu), and all went right, provided that I adapt the menu.lst accordingly:
Code: Select all
# menu.lst produced by grub4dosconfig-v1.9.3
color blue/cyan yellow/blue white/black cyan/black
#splashimage=/splash.xpm
timeout 10
default 0
# Frugal installed Puppy
title Puppy tahr 6.0.5
find --set-root --ignore-floppies --ignore-cd /tahr605_PAE/initrd.gz
kernel /tahr605_PAE/vmlinuz psubdir=tahr605_PAE pmedia=usbflash pfix=fsck
initrd /tahr605_PAE/initrd.gz
title Puppy Stretch 7.5
find --set-root --ignore-floppies --ignore-cd /stretch75_k4148/initrd.gz
kernel /stretch75_k4148/vmlinuz psubdir=stretch75_k4148 pmedia=usbflash pfix=fsck
initrd /stretch75_k4148/initrd.gz
title Puppy Slacko 6.3.0
find --set-root --ignore-floppies --ignore-cd /slacko630/initrd.gz
kernel /slacko630/vmlinuz psubdir=slacko630 pmedia=usbflash pfix=fsck
initrd /slacko630/initrd.gz
title Puppy Xenialpup 7.5
find --set-root --ignore-floppies --ignore-cd /xenialpup75uefi/initrd.gz
kernel /xenialpup75uefi/vmlinuz psubdir=xenialpup75uefi pmedia=usbflash pfix=fsck
initrd /xenialpup75uefi/initrd.gz
# Advanced Menu
title Advanced menu
configfile /menu-advanced.lst
commandline
I don't know exactly where to report the issue but I think it is important that this be done!
[EDIT]: Done! /usr/lib/gtkdialog/box_splash and animated gif icons?
Cordialement.
Last edited by Argolance on Mon 08 Oct 2018, 21:14, edited 1 time in total.
- kiramm
- Posts: 502
- Joined: Fri 06 May 2016, 05:00
- Location: http://murga-linux.com/puppy/viewtopic. ... 393#988393
I always use Gparted running in a Puppy version.
..............
i havent seen any gparted puppy
what is this?
--------------------
i dont understand:
it s written :
yapi is puppy installer...
so this is not full program ?
beacaus if its full program i just have to press th buttons which are in program
but this evidently not work
so
1) i have to go to shop to buy a fresh usb for yapi?
2) pleaseeee where is the link with windows or puppy program to make old usb back to fresh with clicking and not assembler ms dos like programing;)?
i amreally keen on yapi!
-----------------------------------------------
appendix
i produced with puppy installer
see pic but this also not start
pc sais put bootable.... then pres key
----------------------------------------------------------
-----------------------gparted try same 0 result see pics
--------------------------------
-------------------------------
last try yaps came to end
reboot showed menue of usb instaled uefithat
but after pressing start
came out see link:
https://photos.app.goo.gl/GBg4FQxsKCZkKtqK8
here all photos: of all tries:
https://photos.app.goo.gl/rVi8QHSkGDFoxY4n6
---> 2) pleaseeee where is the link with windows or puppy program to make old usb back to fresh with clicking and not assembler ms dos like programing;)?
help:(
..............
i havent seen any gparted puppy
what is this?
--------------------
i dont understand:
it s written :
yapi is puppy installer...
so this is not full program ?
beacaus if its full program i just have to press th buttons which are in program
but this evidently not work
so
1) i have to go to shop to buy a fresh usb for yapi?
2) pleaseeee where is the link with windows or puppy program to make old usb back to fresh with clicking and not assembler ms dos like programing;)?
i amreally keen on yapi!
-----------------------------------------------
appendix
i produced with puppy installer
see pic but this also not start
pc sais put bootable.... then pres key
----------------------------------------------------------
-----------------------gparted try same 0 result see pics
--------------------------------
-------------------------------
last try yaps came to end
reboot showed menue of usb instaled uefithat
but after pressing start
came out see link:
https://photos.app.goo.gl/GBg4FQxsKCZkKtqK8
here all photos: of all tries:
https://photos.app.goo.gl/rVi8QHSkGDFoxY4n6
---> 2) pleaseeee where is the link with windows or puppy program to make old usb back to fresh with clicking and not assembler ms dos like programing;)?
help:(
- Attachments
-
- yapi-cant-usethe -iso if it s in win8can this be improved..jpg
- (63.31 KiB) Downloaded 331 times
-
- YAPS LASTTRY.png
- THIS YAPI NEEDS NO WOMEN GET THIS READY
- (19.79 KiB) Downloaded 333 times
-
- YAPI COMES ON AFTER FARTED FORMAT BOOT FLAG .png
- WITH THIS IT COMES TO END i thik yapi spould do this terrible job
by himself otherwise one should write yapi ONLY FOR MEN ;) - (25.9 KiB) Downloaded 336 times
-
- fart5.png
- (67.85 KiB) Downloaded 339 times
-
- fart4.png
- (28.19 KiB) Downloaded 340 times
-
- fart3.png
- (16.91 KiB) Downloaded 340 times
-
- fart2.png
- (46.28 KiB) Downloaded 340 times
-
- y.png
- (71.46 KiB) Downloaded 340 times
I just did a frugal install of Xtahr 2.0 using Yapi running in Tahrpup 6.0.5
Installed Xtahr 2.0 to a USB flash drive.
USB flash drive formatted fat 32.
Booted OK to the desktop. No problems.
Posting this message from this working Xtahr 2.0
I am not sure why this is giving you so much trouble.
Those boot error messages you got, I have seen before, if the USB flash drive partitioning, formatting, and file allocation table are bad.
Start over fresh with the USB flash drive.
Using some Puppy you can boot with.
Have the usb flash drive unmounted.
Use Gparted.
Make a new partition table. Make it msdos
Make a partition.
Format the partition to fat 32.
Try a new install of a Puppy iso using YaPI.
Installed Xtahr 2.0 to a USB flash drive.
USB flash drive formatted fat 32.
Booted OK to the desktop. No problems.
Posting this message from this working Xtahr 2.0
I am not sure why this is giving you so much trouble.
Those boot error messages you got, I have seen before, if the USB flash drive partitioning, formatting, and file allocation table are bad.
Start over fresh with the USB flash drive.
Using some Puppy you can boot with.
Have the usb flash drive unmounted.
Use Gparted.
Make a new partition table. Make it msdos
Make a partition.
Format the partition to fat 32.
Try a new install of a Puppy iso using YaPI.
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
- kiramm
- Posts: 502
- Joined: Fri 06 May 2016, 05:00
- Location: http://murga-linux.com/puppy/viewtopic. ... 393#988393
is there really no link for this in all it world?
---> 2) pleaseeee where is the link with windows or puppy program to make old usb back to fresh with clicking and not assembler ms dos like programing;)?
on pic was not xthar but thar 606
https://photos.app.goo.gl/rVi8QHSkGDFoxY4n6
https://photos.app.goo.gl/rVi8QHSkGDFoxY4n6
https://photos.google.com/share/AF1QipP ... FMMzNUcGJB
i got xthar also meantime to run on old usb
but the new scandisc nottt
there is an real need for strong fffformat program u know alink for this link for this?
why on iso dvd less problems ?
........ur advice not possible : there is no msdos choice in gparted
and yapi wants also boot flag u didnt say
any way also with flag this 30giga new usb in not willing what to do ?
---> 2) pleaseeee where is the link with windows or puppy program to make old usb back to fresh with clicking and not assembler ms dos like programing;)?
on pic was not xthar but thar 606
https://photos.app.goo.gl/rVi8QHSkGDFoxY4n6
https://photos.app.goo.gl/rVi8QHSkGDFoxY4n6
https://photos.google.com/share/AF1QipP ... FMMzNUcGJB
i got xthar also meantime to run on old usb
but the new scandisc nottt
there is an real need for strong fffformat program u know alink for this link for this?
why on iso dvd less problems ?
........ur advice not possible : there is no msdos choice in gparted
and yapi wants also boot flag u didnt say
any way also with flag this 30giga new usb in not willing what to do ?
Sorry, I thought you knew about flagging the partition boot.yapi wants also boot flag u didnt say
Do you know how to use Gparted?ur advice not possible : there is no msdos choice in gparted
Gparted>Device>Create Partition Table
- Attachments
-
- capture11177.png
- (16.62 KiB) Downloaded 343 times
Last edited by bigpup on Tue 09 Oct 2018, 03:36, edited 1 time in total.
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
I think there is a language problem with you understanding what to do and me being able to tell you and understand what your problem is.any way also with flag this 30giga new usb in not willing what to do ?
I know you are having to translate and some of your statements are not that easy to understand in English.
Is there a Puppy web site in your native language that may be able to help you better
What is your native language?
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
- kiramm
- Posts: 502
- Joined: Fri 06 May 2016, 05:00
- Location: http://murga-linux.com/puppy/viewtopic. ... 393#988393
lost again 1 night with linux lottery
but seems
here is also usb lottery
https://forums.sandisk.com/t5/All-SanDi ... 326/page/4
this my usb
what to do?
IS THIS IT LOTTERY LOT WORLD NORMAL????!!
i thought pc is excat like math but its more lottery than quntenmechanics??
good morning i go sleep
looking forward for messages
but seems
here is also usb lottery
https://forums.sandisk.com/t5/All-SanDi ... 326/page/4
this my usb
what to do?
IS THIS IT LOTTERY LOT WORLD NORMAL????!!
i thought pc is excat like math but its more lottery than quntenmechanics??
good morning i go sleep
looking forward for messages
- Attachments
-
- linux&bootableUSBseems Godless lottery.png
- (192.54 KiB) Downloaded 793 times
- Argolance
- Posts: 3767
- Joined: Sun 06 Jan 2008, 22:57
- Location: PORT-BRILLET (Mayenne - France)
- Contact:
Good morning,
@kiramm
(See picture).
Cordialement.
@kiramm
(See picture).
Cordialement.
- Attachments
-
- 181009_094850_650x516_easyshot.jpg
- Using the "Open with" right click menu...
- (56.16 KiB) Downloaded 772 times
- kiramm
- Posts: 502
- Joined: Fri 06 May 2016, 05:00
- Location: http://murga-linux.com/puppy/viewtopic. ... 393#988393
i took a old usb i found at a printer on uni
with it was possible to boot slackos and x thars
but not thars
butttt:
if i use dvd with puppy ISO for the bypass system
i put iso dvd in slot
i switch on pc
i chose dvd slot
i get puppy wichich was on iso
i shut down
i can choose partition
where is may save file
i give it name
i can choose ...copy ....some stuff on hd to be faster next time THIS OPTION I DONT SEE on yapi
i restart pc
i choose dvd slot
i get the puppy with the save file or if they are more save files i can choose the save file
HERE YAPI MAKES SAFE FILE BECAUSE I CAN SEE IT ON MAY HARDDISCK
WITH FILE MANGER
BUT IT IGNORES SAVE FILE AND GIVES ME FRESH NEW PUPPY
ONLY IN CASE I THINK I MADE SAVE ON USB THEN IT REMEBERS
--------------------------------------------------------------------
please where is a stuff for usb which works like iso dvd
i want to use usb like i use dvd in slot
internet is full of advertisment that puppy can do this
--------->please tel me the pet or windows program with which i can transform
the usb that it works like iso-dvd --->see fat underlined text
i hope i was to understand this time
looking forward fdesperately for any message
puppy desperado
with it was possible to boot slackos and x thars
but not thars
butttt:
if i use dvd with puppy ISO for the bypass system
i put iso dvd in slot
i switch on pc
i chose dvd slot
i get puppy wichich was on iso
i shut down
i can choose partition
where is may save file
i give it name
i can choose ...copy ....some stuff on hd to be faster next time THIS OPTION I DONT SEE on yapi
i restart pc
i choose dvd slot
i get the puppy with the save file or if they are more save files i can choose the save file
HERE YAPI MAKES SAFE FILE BECAUSE I CAN SEE IT ON MAY HARDDISCK
WITH FILE MANGER
BUT IT IGNORES SAVE FILE AND GIVES ME FRESH NEW PUPPY
ONLY IN CASE I THINK I MADE SAVE ON USB THEN IT REMEBERS
--------------------------------------------------------------------
please where is a stuff for usb which works like iso dvd
i want to use usb like i use dvd in slot
internet is full of advertisment that puppy can do this
--------->please tel me the pet or windows program with which i can transform
the usb that it works like iso-dvd --->see fat underlined text
i hope i was to understand this time
looking forward fdesperately for any message
puppy desperado
Understand that booting from a live Puppy CD/DVD is different from booting from a Puppy installed on a USB flash drive.
The boot process knows that a CD/DVD install probably needs to put the save on the hard drive, so it looks on the hard drive for the save.
A Puppy installed to a USB flash drive can put the save on the flash drive.
It recommends to put the save on the USB flash drive.
This puts all of Puppy on the flash drive, so the drive can be used on a different computer and all of Puppy is there to use.
The Puppy install + the save all on the USB drive.
So, the boot process only looks on the USB drive for the save.
In the boot menu entry there is command to tell the boot process it is booting from a USB flash drive.
To make it think it is booting from a CD/DVD install.
On the USB flash drive find the menu.lst file.
Left click on it to open in a text editor.
Find the entry that boots the Puppy installed.
In the kernel line is pmedia= command.
Change the pmedia=usbflash to pmedia=cd.
Save the change.
Example menu.lst entry changed:
title Puppy bionicpup64 7.9.5 (sdd1/bionicpup64795uefi)
find --set-root --ignore-floppies --ignore-cd /bionicpup64795uefi/initrd.gz
kernel /bionicpup64795uefi/vmlinuz psubdir=bionicpup64795uefi pmedia=cd pfix=fsck
initrd /bionicpup64795uefi/initrd.gz
Now the USB install will think it is booting from a CD/DVD and look on the hard drive for the save.
The boot process knows that a CD/DVD install probably needs to put the save on the hard drive, so it looks on the hard drive for the save.
A Puppy installed to a USB flash drive can put the save on the flash drive.
It recommends to put the save on the USB flash drive.
This puts all of Puppy on the flash drive, so the drive can be used on a different computer and all of Puppy is there to use.
The Puppy install + the save all on the USB drive.
So, the boot process only looks on the USB drive for the save.
In the boot menu entry there is command to tell the boot process it is booting from a USB flash drive.
To make it think it is booting from a CD/DVD install.
On the USB flash drive find the menu.lst file.
Left click on it to open in a text editor.
Find the entry that boots the Puppy installed.
In the kernel line is pmedia= command.
Change the pmedia=usbflash to pmedia=cd.
Save the change.
Example menu.lst entry changed:
title Puppy bionicpup64 7.9.5 (sdd1/bionicpup64795uefi)
find --set-root --ignore-floppies --ignore-cd /bionicpup64795uefi/initrd.gz
kernel /bionicpup64795uefi/vmlinuz psubdir=bionicpup64795uefi pmedia=cd pfix=fsck
initrd /bionicpup64795uefi/initrd.gz
Now the USB install will think it is booting from a CD/DVD and look on the hard drive for the save.
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)