Can't use my HP Laserjet Pro 200. How to update hplip?

Problems and successes with specific brands/models of printers
Post Reply
Message
Author
User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

#31 Post by rcrsn51 »

I just checked this. The file turns from a gz file to a regular text file.

If that's not happening, you don't have a good download.

[Edit] Take the copy of hp-laserjet_200_colormfp_m276-ps.ppd.gz that you are downloading and attach it to your next post.
Top
LeithR
Posts: 338
Joined: Mon 24 Jan 2011, 12:15
Location: Kemnay, Aberdeenshire/Scotland

#32 Post by LeithR »

You have suggested something that is beyond my ability.

How do I attach a copy of the file to a post please?
Top
User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

#33 Post by rcrsn51 »

At the bottom of the screen where you make a post, there are some buttons to select a file and attach it.
Top
LeithR
Posts: 338
Joined: Mon 24 Jan 2011, 12:15
Location: Kemnay, Aberdeenshire/Scotland

#34 Post by LeithR »

Many thanks,
Here's my download.
Attachments
hp-laserjet_200_colormfp_m276-ps.ppd.gz
(19.72 KiB) Downloaded 304 times
Top
User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

#35 Post by rcrsn51 »

I don't know what you are doing with this file. But when I click on it, it turns into a text file with a .ppd extension. This is correct.

But if you can't get that to work, just copy the .gz file into /usr/share/cups/model. Run the CUPS setup wizard.
Top
LeithR
Posts: 338
Joined: Mon 24 Jan 2011, 12:15
Location: Kemnay, Aberdeenshire/Scotland

#36 Post by LeithR »

OK, I'll do that this morning when I go round to the shed.
Top
LeithR
Posts: 338
Joined: Mon 24 Jan 2011, 12:15
Location: Kemnay, Aberdeenshire/Scotland

#37 Post by LeithR »

I think we are moving forward albeit slowly. I found the pinter in the list, not at the top of the list but just on it. I've selected it and set it up in cups. Tried a test print on usb connection without success.

I'm not going to be in the shed until Monday now. Ill pick up any of your messages over the weekend and act on them on Monday.

I appreciate your time and effort. Thanks for that.
Top
User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

#38 Post by rcrsn51 »

Using the same steps as I gave you, I ran some simulations and it worked. But that's not the same as having the physical printer.

I'm surprised that your model did not appear at the TOP of the list. That should happen if you have the correct matching PPD file.

Instead of printing a test page, print something from a word processor.

This printer would probably work if you were using a big-boy Linux with full HPLIP built-in.

I don't know where else to go with this.
Top
LeithR
Posts: 338
Joined: Mon 24 Jan 2011, 12:15
Location: Kemnay, Aberdeenshire/Scotland

#39 Post by LeithR »

rcrsn51 wrote:I don't know where else to go with this.
Now thats something I never thought I'd hear you say after the many pages of your helpful comments I've read over the years!

I'll run further tests on Monday, thanks again.
Top
LeithR
Posts: 338
Joined: Mon 24 Jan 2011, 12:15
Location: Kemnay, Aberdeenshire/Scotland

#40 Post by LeithR »

Here's what I set up in CUPS. Its not working from a a LibreOffice document.

Image
Top
User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

#41 Post by rcrsn51 »

1. Open /etc/cups/cupsd.conf

2. Change "Loglevel info" to "Loglevel debug"

3. Run the command: /etc/init.d/cups restart

4. Print something.

5. Open /var/log/cups/error_log.

6. Start at the bottom, work up looking for error messages.
Top
LeithR
Posts: 338
Joined: Mon 24 Jan 2011, 12:15
Location: Kemnay, Aberdeenshire/Scotland

#42 Post by LeithR »

Came up with this error
E [10/Apr/2017:12:20:51 +0100] [Job 39] Job stopped due to filter errors; please consult the error_log file for details.
These are the msgs afte the one above:
D [10/Apr/2017:12:20:51 +0100] PID 10326 (/usr/lib/cups/backend/usb) exited with no errors.
D [10/Apr/2017:12:20:51 +0100] [Job 39] Wrote 1 pages...
D [10/Apr/2017:12:20:51 +0100] [Job 39] PID 10334 (pstops) exited with no errors.
D [10/Apr/2017:12:20:51 +0100] [Job 39] PID 10333 (pdftops) exited with no errors.
D [10/Apr/2017:12:20:51 +0100] PID 10324 (/usr/lib/cups/filter/pdftops) exited with no errors.
D [10/Apr/2017:12:20:51 +0100] Discarding unused job-state-changed event...
E [10/Apr/2017:12:20:51 +0100] [Job 39] Job stopped due to filter errors; please consult the error_log file for details.
D [10/Apr/2017:12:20:51 +0100] cupsdMarkDirty(----J-)
D [10/Apr/2017:12:20:51 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
D [10/Apr/2017:12:20:51 +0100] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [10/Apr/2017:12:20:51 +0100] Discarding unused printer-state-changed event...
D [10/Apr/2017:12:20:51 +0100] [Job 39] The following messages were recorded from 12:20:50 to 12:20:50
D [10/Apr/2017:12:20:51 +0100] [Job 39] Printer found with device ID: MFG:Hewlett-Packard;CMD:PJL,PML,PCLXL,URP,PCL,PDF,POSTSCRIPT;MDL:HP LaserJet 200 colorMFP M276nw;CLS:PRINTER;DES:Hewlett-Packard LaserJet 200 colorMFP M276nw;MEM:MEM=230MB;COMMENT:RES=600x8;LEDMDIS:USB#ff#04#01;CID:HPLJPDLV1; Device URI: usb://HP/LaserJet%20200%20colorMFP%20M276nw?serial=CNF8GBXJW6&interface=1
D [10/Apr/2017:12:20:51 +0100] [Job 39] End of messages
D [10/Apr/2017:12:20:51 +0100] [Job 39] printer-state=3(idle)
D [10/Apr/2017:12:20:51 +0100] [Job 39] printer-state-message="Sending data to printer."
D [10/Apr/2017:12:20:51 +0100] [Job 39] printer-state-reasons=none
D [10/Apr/2017:12:20:52 +0100] [Job 39] Unloading...
I [10/Apr/2017:12:21:21 +0100] Saving job.cache...
D [10/Apr/2017:12:21:21 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Printing jobs and dirty files"
D [10/Apr/2017:12:21:21 +0100] Report: clients=1
D [10/Apr/2017:12:21:21 +0100] Report: jobs=11
D [10/Apr/2017:12:21:21 +0100] Report: jobs-active=1
D [10/Apr/2017:12:21:21 +0100] Report: printers=4
D [10/Apr/2017:12:21:21 +0100] Report: printers-implicit=0
D [10/Apr/2017:12:21:21 +0100] Report: stringpool-string-count=28438
D [10/Apr/2017:12:21:21 +0100] Report: stringpool-alloc-bytes=14992
D [10/Apr/2017:12:21:21 +0100] Report: stringpool-total-bytes=539992


Here's what it says on CUPS after trying to print
Image
Top
User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

#43 Post by rcrsn51 »

You need to go farther up and find the actual filter error.

Also, open a terminal and type the command: /usr/lib/cups/filter/hpps
Top
LeithR
Posts: 338
Joined: Mon 24 Jan 2011, 12:15
Location: Kemnay, Aberdeenshire/Scotland

#44 Post by LeithR »

I've been up and down the error log and can't find anything that indicates a filter error other than what I have already mentioned. s there anything specific that I should be looking for?

When I ran the command: /usr/lib/cups/filter/hpps it returned the msge
"env: can't execute 'python' No such file or directory"
Top
User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

#45 Post by rcrsn51 »

"env: can't execute 'python' No such file or directory"
See Step 2 from the list of instructions above.
Top
LeithR
Posts: 338
Joined: Mon 24 Jan 2011, 12:15
Location: Kemnay, Aberdeenshire/Scotland

#46 Post by LeithR »

We are shutting up shop for today. will come back to this on Thursday. Thanks
Top
LeithR
Posts: 338
Joined: Mon 24 Jan 2011, 12:15
Location: Kemnay, Aberdeenshire/Scotland

#47 Post by LeithR »

Is that this instruction?
2. Change "Loglevel info" to "Loglevel debug"

I checked that before I left the Shed on Monday, it still read "Loglevel debug"
will get onto it again in the morning.
Top
LeithR
Posts: 338
Joined: Mon 24 Jan 2011, 12:15
Location: Kemnay, Aberdeenshire/Scotland

#48 Post by LeithR »

rcrsn51 wrote:You need to go farther up and find the actual filter error.

Also, open a terminal and type the command: /usr/lib/cups/filter/hpps
To my untutored eye, there doesn't seem to be a command after /usr/lib/cups/filter/hpps, just the path?
Top
User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

#49 Post by rcrsn51 »

LeithR wrote:Is that this instruction?
2. Change "Loglevel info" to "Loglevel debug"
HP has added some enterprise features that require Python.

2. Some Puppies, like Tahrpup, already have basic Python. Otherwise, get it here.
Top
LeithR
Posts: 338
Joined: Mon 24 Jan 2011, 12:15
Location: Kemnay, Aberdeenshire/Scotland

#50 Post by LeithR »

Updated this yesterday - Success, I installed Python and the printer is now working as a usb connected device. Many thanks for that!!

Tried to let you know then but our Broadband went down so couldn't.

There is more work to do to get it working as a wifi connected printer.

I also became a grandad for the third time yesterday.
Top
Post Reply

Return to “Printers”