OK, then that is the problem when it comes to multisession CD. Once I have saved my setup back to the CD, all workfiles are read from and saved to a HDD, and there is usually no need for saving to the CD at shutdown, I just poweroff. The problem is that the multisession CD will always create a new hostname on startup, and that will crash with any saved hostname. I have tested it, and I got a new hostname every time. In my old Lucid, the hostname was only puppypc, whitout any number to it.Once the unique hostname is established on first run, it is recorded in /etc/hostname and /etc/hosts, then subsequently included in your savefile (assuming you choose to save the current desktop session before shutdown).
Dpup Stretch 7.5 CE (RC-5)
True freedom is a live Puppy on a multisession CD/DVD.
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
uname -i does returns «unknown» instead of sys architecture
Hi radky,
uname -i returns «unknown» instead of system architecture (see shot attached with k4.9.149)
Have encountered this while compiling gcad3D, a CAD software (http://gcad3d.org).
Also the case on DpupStretch 7.5 k4.1.48.
It would return 32 or 64 according to system architecture currently running.
HTH
Charlie
uname -i returns «unknown» instead of system architecture (see shot attached with k4.9.149)
Have encountered this while compiling gcad3D, a CAD software (http://gcad3d.org).
Also the case on DpupStretch 7.5 k4.1.48.
It would return 32 or 64 according to system architecture currently running.
HTH
Charlie
- Attachments
-
- uname-i.png
- (17.99 KiB) Downloaded 551 times
Re: uname -i does returns «unknown» instead of sys architecture
Hi Charlie,charlie6 wrote:uname -i returns «unknown» instead of system architecture.
Have encountered this while compiling gcad3D, a CAD software (http://gcad3d.org).
It would return 32 or 64 according to system architecture currently running.
In Linux it seems 'uname -i' is non-portable, and there are output discrepancies across GNU/Linux distros.
For me, 'uname -i' and 'uname -p' return 'unknown' in Dpup Stretch.
If I understand correctly, some distros have patched the 'uname' utility in the coretutils package.
For example, running the Slackware 'uname -i' on my system returns 'GenuineIntel' rather than a numerical platform designation.
If the gcad3d install script depends on a numerical output of 'uname -i' before proceeding with the installation, maybe you could remove that paticular test.
[color=blue][b][url=http://www.smokey01.com/radky/PupMates.html]PupMates[/url][/b][/color]
My stress level is raised again , after another attempt to make a working multisession save to CD. 33Mb of time-consuming modifications down the drain. When I rebooted to RAM and opened the save folder, I noted that there are several modifications that are not saved at all, and several of the modified and overwritten original files, are saved in their stock form instead of the modified version. I have made exact notes of the modifications, so I am certain that I did everything correct. Again!
There is somthing wrong in the Dpup Stretch-7.5 RC4 save code, somewhere.
One indication may be two empty trays on top of each other (the border of rear one is just visible), a cursor in an empty screen, no mouse and keyboard interaction, and a strugggling player trying to get squeeze some more out of the CD, again and again...
There is somthing wrong in the Dpup Stretch-7.5 RC4 save code, somewhere.
One indication may be two empty trays on top of each other (the border of rear one is just visible), a cursor in an empty screen, no mouse and keyboard interaction, and a strugggling player trying to get squeeze some more out of the CD, again and again...
True freedom is a live Puppy on a multisession CD/DVD.
tallboy,tallboy wrote:I noted that there are several modifications that are not saved at all, and several of the modified and overwritten original files, are saved in their stock form instead of the modified version. I have made exact notes of the modifications, so I am certain that I did everything correct.
By private message, if you could send the 'exact notes of your modifications' I could test your method of multisession save to CD.
Thanks
[color=blue][b][url=http://www.smokey01.com/radky/PupMates.html]PupMates[/url][/b][/color]
radky, I'll translate some of my norwegian comments to english first, and send it to you. It is a Notecase file (.ncd).
BTW, I have compiled the latest ImageMagic 7.0.8-46 in Dpup Stretch, and made both an .sfs and a .pet, They are each ~24Mb in size. They can be found at https://w123.no/linux/, but it is maybe not the ideal download site...
ImageMagick can read, write and modify more than 200 image formats. If you are unfamiliar with the program, I suggest you read the intro documentation before attempting to modify an image. There is a README, with links, on site and in in both .pet and .sfs.
BTW, I have compiled the latest ImageMagic 7.0.8-46 in Dpup Stretch, and made both an .sfs and a .pet, They are each ~24Mb in size. They can be found at https://w123.no/linux/, but it is maybe not the ideal download site...
ImageMagick can read, write and modify more than 200 image formats. If you are unfamiliar with the program, I suggest you read the intro documentation before attempting to modify an image. There is a README, with links, on site and in in both .pet and .sfs.
Last edited by tallboy on Sat 01 Jun 2019, 21:30, edited 1 time in total.
True freedom is a live Puppy on a multisession CD/DVD.
- charlie6
- Posts: 1230
- Joined: Mon 30 Jun 2008, 04:03
- Location: Saint-Gérard / Walloon part of Belgium
Re: uname -i does returns «unknown» instead of sys architecture
Hi radky,
in the relevant script among the source files, I edited and replaced ,«uname -i» by «getconf LONG_BIT»; this allowed the build to complete without error, and the resulting built binary file to find the folder whose name has the "getconf LONG_BIT" in it (actualy 32).
Maybe I should report your comment to the gcad3ds developper. In earlier versions he indeed had used «getconf LONG_BIT» instead of «uname -i» to get 32 or 64 according to the used system.
Thanks a lot for your reply!
Best regards
Charlie
I found a workaround:radky wrote:uname -i returns «unknown» instead of system architecture...
If the gcad3d install script depends on a numerical output of 'uname -i' before proceeding with the installation, maybe you could remove that paticular test.
in the relevant script among the source files, I edited and replaced ,«uname -i» by «getconf LONG_BIT»; this allowed the build to complete without error, and the resulting built binary file to find the folder whose name has the "getconf LONG_BIT" in it (actualy 32).
Maybe I should report your comment to the gcad3ds developper. In earlier versions he indeed had used «getconf LONG_BIT» instead of «uname -i» to get 32 or 64 according to the used system.
Thanks a lot for your reply!
Best regards
Charlie
-
- Posts: 721
- Joined: Sat 31 Mar 2018, 08:01
- Location: Rakaia
- Contact:
@Lobster,Lobster wrote:Is the RC-4 ready to be an official Puppy 8.1 Community Edition?
Its good to see you on the forum again. I hope all is well in the Paradox Realm.
Since inception in late 2017, it seems Dpup Stretch 7.5 has become a 'slow' rolling release rather than an incremental point release. To that end, RC5 should be available soon including kernel and application updates, plus multiple fixes and enhancements introduced recently by our Woof-CE devs.
Although Dpup Stretch is a Woof-CE build, it is unconventional in many ways and deviates somewhat from standard Puppy. I'm not sure how well it would port to an 8.1 designation, but thanks for your consideration.
[color=blue][b][url=http://www.smokey01.com/radky/PupMates.html]PupMates[/url][/b][/color]
- Lobster
- Official Crustacean
- Posts: 15522
- Joined: Wed 04 May 2005, 06:06
- Location: Paradox Realm
- Contact:
It is is a quantum place. Both existent and non-existent. Schrödinger's cat says hi/meow ...radky wrote:
@Lobster,
Its good to see you on the forum again. I hope all is well in the Paradox Realm.
An unconventional Puppy? My favourite sort.Since inception in late 2017, it seems Dpup Stretch 7.5 has become a 'slow' rolling release rather than an incremental point release. To that end, RC5 should be available soon including kernel and application updates, plus multiple fixes and enhancements introduced recently by our Woof-CE devs.
Although Dpup Stretch is a Woof-CE build, it is unconventional in many ways and deviates somewhat from standard Puppy. I'm not sure how well it would port to an 8.1 designation, but thanks for your consideration.
Because of the stability, Woof CE build, rolling release, hard work, you are welcome to be part of the movement towards Puppy Nine, any time ...
Live long
and Puppy
Hi radky,
I just download your puppy : great job again. Thank you very much.
I put it in french with the french langpack by esmourguit : it works fine. And i put also FbBox in french : I just modify your english2french script for some translations and it is ok.
I didn't read all the 43 pages and don't know if you already explain how to put FbBox in french.
In case, to get FbBox in french : https://augras.eu/puppy_forum/index.php ... 409#msg409.
Only the Menu entries are in french and PupShutdown.
Thank again Radky,
Philippe
I just download your puppy : great job again. Thank you very much.
I put it in french with the french langpack by esmourguit : it works fine. And i put also FbBox in french : I just modify your english2french script for some translations and it is ok.
I didn't read all the 43 pages and don't know if you already explain how to put FbBox in french.
In case, to get FbBox in french : https://augras.eu/puppy_forum/index.php ... 409#msg409.
Only the Menu entries are in french and PupShutdown.
Thank again Radky,
Philippe
Hi,
i'm with your puppy since yesterday, stretch-7.5-uefi-k4.9.149, on a old laptop lenovo x201i from 2009, and it seems everything works fine. I'm still with my xenial by phil666 in which my ram seems always full but it's not the same here : i don't understand why but it's what i can see.
I just not Get java runtime doesn't work (it's the same in the other puppies), and transparency doesn't work with urxvt-control.
I'm with 2 screens, the one of the laptop and another 22" one and zarfy is not easy to use like lxrandr : each reboot my config isn't keep.
For a RC it's a very good one.
Thank you for this great work.
Philippe
EDIT : i found 2 other small things
- Get flash doen't work (like in the other puppies) : there is a Getflash-1.6d.pet that works http://murga-linux.com/puppy/viewtopic. ... 3&start=22
- the sylpheed entry in the menus is empty : in the sylpheed.desktop file there is Name[fr]= but it must be Name[fr]=Sylpheed
i'm with your puppy since yesterday, stretch-7.5-uefi-k4.9.149, on a old laptop lenovo x201i from 2009, and it seems everything works fine. I'm still with my xenial by phil666 in which my ram seems always full but it's not the same here : i don't understand why but it's what i can see.
I just not Get java runtime doesn't work (it's the same in the other puppies), and transparency doesn't work with urxvt-control.
I'm with 2 screens, the one of the laptop and another 22" one and zarfy is not easy to use like lxrandr : each reboot my config isn't keep.
For a RC it's a very good one.
Thank you for this great work.
Philippe
EDIT : i found 2 other small things
- Get flash doen't work (like in the other puppies) : there is a Getflash-1.6d.pet that works http://murga-linux.com/puppy/viewtopic. ... 3&start=22
- the sylpheed entry in the menus is empty : in the sylpheed.desktop file there is Name[fr]= but it must be Name[fr]=Sylpheed
Hi Philippe,
Thanks for testing Stretch RC4 (released 10 Jan 2019). The next release (RC5) is now in testing and should be available soon.
Thanks also for the link which provides instructions for French localization of FbBox.
https://augras.eu/puppy_forum/index.php ... 409#msg409
---
augras wrote:
http://murga-linux.com/puppy/viewtopic.php?t=101592
---
augras wrote:
1 - Go to Menu -> Utility -> Urxvt Terminal Control
2 - Set Transparency to On
3 - Set Shading to 100
4 - Click Apply
5 - Restart/Relaunch Urxvt
---
augras wrote:
For the auto-start script, run the following code in a terminal to create /root/Startup/zarfy:
---
augras wrote:
Edit:
The default GetFlashPlayer v1.7-1 works fine for me.
Thanks for testing Stretch RC4 (released 10 Jan 2019). The next release (RC5) is now in testing and should be available soon.
Thanks also for the link which provides instructions for French localization of FbBox.
https://augras.eu/puppy_forum/index.php ... 409#msg409
---
augras wrote:
I downloaded and tested rerwin's get_java-1.1.pet, but it seems the Oracle site parameters have changed and the download fails. Currently, I don't have time to troubleshoot those changes, but maybe one of our forum members could evaluate further.Get java runtime doesn't work
http://murga-linux.com/puppy/viewtopic.php?t=101592
---
augras wrote:
Please try the following:(urxvt) transparency doesn't work with urxvt-control
1 - Go to Menu -> Utility -> Urxvt Terminal Control
2 - Set Transparency to On
3 - Set Shading to 100
4 - Click Apply
5 - Restart/Relaunch Urxvt
---
augras wrote:
You could create a small script which (when booting) automatically loads zarfy with your last screen configuration settings.zarfy... each reboot my config isn't keep
For the auto-start script, run the following code in a terminal to create /root/Startup/zarfy:
Code: Select all
echo '#!/bin/sh
zarfy -l' > $HOME/Startup/zarfy
chmod 755 $HOME/Startup/zarfy
augras wrote:
Thanks, I'll make the correction for RC5.Get flash doesn't work (like in the other puppies) : there is a Getflash-1.6d.pet that works.
The sylpheed entry in the menus is empty : in the sylpheed.desktop file there is Name[fr]= but it must be Name[fr]=Sylpheed
Edit:
The default GetFlashPlayer v1.7-1 works fine for me.
[color=blue][b][url=http://www.smokey01.com/radky/PupMates.html]PupMates[/url][/b][/color]
Until I can get around to updating get_java, please work around the download failure by going to the java site and downloading the latest jre from there to /tmp. Then run get_java but install from the copy in /tmp.radky wrote:augras wrote:
Quote:
Get java runtime doesn't work
I downloaded and tested rerwin's get_java-1.1.pet, but it seems the Oracle site parameters have changed and the download fails. Currently, I don't have time to troubleshoot those changes, but maybe one of our forum members could evaluate further.
Richard
Font family Serif is mapped to an unserifed font (DejaVu Sans?)
- Attachments
-
- image-1.png
- (30.41 KiB) Downloaded 960 times