Music2go-Artful
Hi RSH, was having a look at your and Revolverve threads in Multimedia section. Good stuff going on there.
I was reading the Revolverve thread and you were trying to get Qtractor to
mix down your audio and midi tracks?
If you hit: EDIT/TRACK/EXPORT TRACKS/AUDIO
Then you will get a dialogue offering where to export the mixdown wave track, (I usually save outside the Qtractor folder, like in Downloads or somewhere)
AND what buses you want to be included in the export (you could just click on MASTER).
Also the range of the mixdown, the whole session length, or a loop, whatever.
Then hit OK and it will render the mixdown including any midi (internal synths, LV2, VST etc) NOT Sure about external MIDI synths though.
And yes Cadence needs a little FORCE Restart now and again I notice!
Always seems to recover though eventually
Anyways, hope this helps if that was what you were trying to do?
I was reading the Revolverve thread and you were trying to get Qtractor to
mix down your audio and midi tracks?
If you hit: EDIT/TRACK/EXPORT TRACKS/AUDIO
Then you will get a dialogue offering where to export the mixdown wave track, (I usually save outside the Qtractor folder, like in Downloads or somewhere)
AND what buses you want to be included in the export (you could just click on MASTER).
Also the range of the mixdown, the whole session length, or a loop, whatever.
Then hit OK and it will render the mixdown including any midi (internal synths, LV2, VST etc) NOT Sure about external MIDI synths though.
And yes Cadence needs a little FORCE Restart now and again I notice!
Always seems to recover though eventually
Anyways, hope this helps if that was what you were trying to do?
I've been trying out this DSP Brickwall Limiter, Seems very transparent on the audio, and could save a track from possibly peaking into distortion on occasion.
Not tried the LADSPA plugin yet, but the win vst version is working well.
Flash, could you remove that other post on Loudmax please, I accidently hit the wrong button.
Further info here:
https://loudmax.blogspot.com/
Not tried the LADSPA plugin yet, but the win vst version is working well.
Flash, could you remove that other post on Loudmax please, I accidently hit the wrong button.
Further info here:
https://loudmax.blogspot.com/
- Attachments
-
- LM_Screenshot.png
- (39.72 KiB) Downloaded 1300 times
Hi, I’ve put Fred’s / Tizen YouTube Player/ Downloader in the Smokey repository.
There were a couple of icons missing in the deeper layers, like send comments.
I think I found all the missing ones, with Fred’s help and the pet also changes some of the general information
Dialogues in Puppy from the shocking red warning triangles to a more mellow green info box.
The icons changed are Dialogue-error, information, question, stop, warning, help-about and nb
In pixmaps puppy, in case you like the original ones.
There were a couple of icons missing in the deeper layers, like send comments.
I think I found all the missing ones, with Fred’s help and the pet also changes some of the general information
Dialogues in Puppy from the shocking red warning triangles to a more mellow green info box.
The icons changed are Dialogue-error, information, question, stop, warning, help-about and nb
In pixmaps puppy, in case you like the original ones.
- Attachments
-
- dialogues.png
- (30.66 KiB) Downloaded 1163 times
Hi, I’ve put Gnome Maps in the Smokey repository.
It uses Open Street Maps.
To work it, grab the world with your mouse and move it where you want to look at, then middle mouse will zoom in down to street name level. 45mb download.
I think the maps can actually be downloaded and incorporated into the app, but at the moment it uses the internet to get the maps, doesn’t seem to use horrendous gigabytes though.
Might work with other pups around 17 or 18, but not tested.
http://www.smokey01.com/Smithy/Artful%2 ... e-maps.pet
It uses Open Street Maps.
To work it, grab the world with your mouse and move it where you want to look at, then middle mouse will zoom in down to street name level. 45mb download.
I think the maps can actually be downloaded and incorporated into the app, but at the moment it uses the internet to get the maps, doesn’t seem to use horrendous gigabytes though.
Might work with other pups around 17 or 18, but not tested.
http://www.smokey01.com/Smithy/Artful%2 ... e-maps.pet
- Attachments
-
- gnome maps.jpg
- (237.27 KiB) Downloaded 436 times
I’ve noticed that if playing videos of 30 mins or more in SMPlayer, the audio stream starts to screw up over the usb bus, possibly also the standard alsa bus. Forcing the cache in the app should help if you come across this. Depending on how much ram you have of course
- Attachments
-
- Cache.png
- (66.59 KiB) Downloaded 1069 times
Well here is a nice little app for the terminally lazy, or if you don’t want the hassle of loading up Qtractor or other music apps just to test out a plugin.
This is Nanohost by Tonebytes. It is a little host for vst instruments and plugins. This is the 32 bit version. There is also a 64bit version. Basically you load a vst and play. It will also record your output if desired as an audio file.
In the config, you select your soundcard, I would suggest you start up Jack Control (Cadence) first, then you can use the wineasio driver which will give lower latency, but other options are available.
From what I can tell it is pretty stable, remembers configs that you save (automatically too!) and is an all round versatile little app.
Loading multiple plugins would be a cool update. I’ve set it to go into root/vst, so if you throw plugins in there, they will show up without having to browse all over Linux.
Tone 2 also makes some fantastic synths that you can purchase.
This is Nanohost by Tonebytes. It is a little host for vst instruments and plugins. This is the 32 bit version. There is also a 64bit version. Basically you load a vst and play. It will also record your output if desired as an audio file.
In the config, you select your soundcard, I would suggest you start up Jack Control (Cadence) first, then you can use the wineasio driver which will give lower latency, but other options are available.
From what I can tell it is pretty stable, remembers configs that you save (automatically too!) and is an all round versatile little app.
Loading multiple plugins would be a cool update. I’ve set it to go into root/vst, so if you throw plugins in there, they will show up without having to browse all over Linux.
Tone 2 also makes some fantastic synths that you can purchase.
- Attachments
-
- Cadence.png
- (34.61 KiB) Downloaded 922 times
-
- Nanohost-open.jpg
- (111.24 KiB) Downloaded 337 times
-
- Screenshot.png
- (89.83 KiB) Downloaded 922 times
This is Alsaplayer.
An interesting feature set that no other linux media player has.
Realtime features include looping, play in reverse, semitone and microtone adjustments on the fly. Realtime CPU scheduling.
Jack output as well as Alsa. Not bad for a 750k pet.
I’ve uploaded the midi input and jack input sources if anyone wants to attempt a couple of compiles.
GTK+ INTERFACE KEYBOARD CONTROLS
v Stop
x Play
c Pause
b Next Song
z Previous Song
g Seek Forward
a Seek Backward
f Forward Play
s Reverse Play
t Musical semitone +1. (handy for changing the key the song is played back in)
q Musical semitone -1.
h Speed Up one comma. (handy to tune the song instead of the guitar when playing at the same time as listening)
i Speed Down one comma.
r Volume Up
w Volume Down
l Loop
TERMINAL GNU command line syntax, with long options starting with
two dashes (`-'). A summary of options is included below.
Sound driver options:
-d, --device string
Select the specific device for the output plugin.
For the ALSA plugin, the default is "default".
For the JACK plugin, the default is alsa_pcm:playback_1,alsa_pcm:playback_2"
-o, --output [alsa|esound|jack|nas|null|oss|sgi|sparc]
Use the specified output driver.
-f, --fragsize #
Set fragment size in bytes [default=4096].
-F, --frequency #
Set the output frequency [default=44100].
-g, --fragcount #
Fragment count [default=8].
-r, --realtime
Enable realtime scheduling.
-c, --config <file>
Use the given config file for this session.
-h, --help
Print this help message.
-i, --interface <interface>
Use the specified interface instead of the default one.
-I, --script <file>
Specify the script to pass to the interface plugin.
-l, --startvolume <vol>
Start with this volume [default=1.0].
-p, --path <path>
Set the path alsaplayer looks for add-ons.
-q, --quiet
Quiet operation, no output.
-s, --session-name name
Name this session "name"
-v, --version
Print version of this program.
--verbose
Be verbose about the output.
--nosave
Do not save playlist content at exit.
Player control:
-n, --session #
Select session # [default=0]
-e, --enqueue file(s)
Enqueue file(s) in a running alsaplayer.
-E, --replace file(s)
Clears and queues file(s) in a running alsaplayer.
--status
Get some information about the session.
--volume #
Set software volume [0.0-1.0].
--start
Start playing.
--stop
Stop playing.
--pause
Pause/unpause playing.
--prev Jump to the previous track.
--next Jump to the next track.
--seek <second>
Jump to the specified second in the current track.
--relative <second>
Jump <second> seconds from current position.
--speed <value>
Set the playback speed with -10 <= <value> <= 10. 1.0 = normal speed -1.0=
normal speed backwards.
Be aware that alsaplayer respects your LOCALE.
That implies that the decimal point will vary accordingly. I.e.,with french LOCALE, a valid speed value is 1,5 and not 1.5.
--jump #
Jump to the specified playlist track.
--clear
Clear the whole playlist
--quit Quit the session.
Experimental options:
-S,--loopsong
Loop the file.
-P,--looplist
Loop the playlist.
-x,--crossfade
Crossfade playlist entries.
An interesting feature set that no other linux media player has.
Realtime features include looping, play in reverse, semitone and microtone adjustments on the fly. Realtime CPU scheduling.
Jack output as well as Alsa. Not bad for a 750k pet.
I’ve uploaded the midi input and jack input sources if anyone wants to attempt a couple of compiles.
Code: Select all
http://www.smokey01.com/Smithy/Artful%20ardvark/
v Stop
x Play
c Pause
b Next Song
z Previous Song
g Seek Forward
a Seek Backward
f Forward Play
s Reverse Play
t Musical semitone +1. (handy for changing the key the song is played back in)
q Musical semitone -1.
h Speed Up one comma. (handy to tune the song instead of the guitar when playing at the same time as listening)
i Speed Down one comma.
r Volume Up
w Volume Down
l Loop
TERMINAL GNU command line syntax, with long options starting with
two dashes (`-'). A summary of options is included below.
Sound driver options:
-d, --device string
Select the specific device for the output plugin.
For the ALSA plugin, the default is "default".
For the JACK plugin, the default is alsa_pcm:playback_1,alsa_pcm:playback_2"
-o, --output [alsa|esound|jack|nas|null|oss|sgi|sparc]
Use the specified output driver.
-f, --fragsize #
Set fragment size in bytes [default=4096].
-F, --frequency #
Set the output frequency [default=44100].
-g, --fragcount #
Fragment count [default=8].
-r, --realtime
Enable realtime scheduling.
-c, --config <file>
Use the given config file for this session.
-h, --help
Print this help message.
-i, --interface <interface>
Use the specified interface instead of the default one.
-I, --script <file>
Specify the script to pass to the interface plugin.
-l, --startvolume <vol>
Start with this volume [default=1.0].
-p, --path <path>
Set the path alsaplayer looks for add-ons.
-q, --quiet
Quiet operation, no output.
-s, --session-name name
Name this session "name"
-v, --version
Print version of this program.
--verbose
Be verbose about the output.
--nosave
Do not save playlist content at exit.
Player control:
-n, --session #
Select session # [default=0]
-e, --enqueue file(s)
Enqueue file(s) in a running alsaplayer.
-E, --replace file(s)
Clears and queues file(s) in a running alsaplayer.
--status
Get some information about the session.
--volume #
Set software volume [0.0-1.0].
--start
Start playing.
--stop
Stop playing.
--pause
Pause/unpause playing.
--prev Jump to the previous track.
--next Jump to the next track.
--seek <second>
Jump to the specified second in the current track.
--relative <second>
Jump <second> seconds from current position.
--speed <value>
Set the playback speed with -10 <= <value> <= 10. 1.0 = normal speed -1.0=
normal speed backwards.
Be aware that alsaplayer respects your LOCALE.
That implies that the decimal point will vary accordingly. I.e.,with french LOCALE, a valid speed value is 1,5 and not 1.5.
--jump #
Jump to the specified playlist track.
--clear
Clear the whole playlist
--quit Quit the session.
Experimental options:
-S,--loopsong
Loop the file.
-P,--looplist
Loop the playlist.
-x,--crossfade
Crossfade playlist entries.
- Attachments
-
- alsaplayer.png
- (99.7 KiB) Downloaded 397 times
Network Fix
There is a network disconnect/ reconnect fix PET in Smokey's repository.
It was not functioning correctly when right clicking on the Network Icon on
the taskbar. As far as I can tell is now okay.
It was not functioning correctly when right clicking on the Network Icon on
the taskbar. As far as I can tell is now okay.
Firefox
Good morning, here is Firefox 68 as an ADRV.
It can be used instead of the Light Browser by
replacing the ADRV with this one. (Maybe tuck the other one somewhere safe or rename it).
From what I can tell, it doesn't seem to need Apulse?
Sound seems to be playing fine on a pretty standard Realtek chip.
If anyone wants to hammer some sites and try breaking the browser and sound that would be handy
smokey01.com/Smithy/Artful%20ardvark/Browsers
It can be used instead of the Light Browser by
replacing the ADRV with this one. (Maybe tuck the other one somewhere safe or rename it).
From what I can tell, it doesn't seem to need Apulse?
Sound seems to be playing fine on a pretty standard Realtek chip.
If anyone wants to hammer some sites and try breaking the browser and sound that would be handy
smokey01.com/Smithy/Artful%20ardvark/Browsers
Oops..
When updating the Firefox 68 through update, the links on the desktop
taskbar and openbox internet/firefox menu cease to function.
Little pet here will fix those links, even if there are more updates...
I noticed that 68.02 update is just 5 mb.
When updating the Firefox 68 through update, the links on the desktop
taskbar and openbox internet/firefox menu cease to function.
Little pet here will fix those links, even if there are more updates...
I noticed that 68.02 update is just 5 mb.
- Attachments
-
- firefox-update-linkfix.pet
- (1.34 KiB) Downloaded 354 times
Here is a pet based on Barkin's neat Disable Firefox Updates, if required.
You will have to delete the distribution folder if you want it to ever update again.
And a few about:configs that maybe handy for some. Phone home stuff.
user_pref("toolkit.telemetry.archive.enabled", false);
user_pref("toolkit.telemetry.bhrPing.enabled", false);
user_pref("toolkit.telemetry.cachedClientID", "");
user_pref("toolkit.telemetry.firstShutdownPing.enabled", false);
user_pref("toolkit.telemetry.hybridContent.enabled", false);
user_pref("toolkit.telemetry.newProfilePing.enabled", false);
user_pref("toolkit.telemetry.previousBuildID", "");
user_pref("toolkit.telemetry.reportingpolicy.firstRun", false);
user_pref("toolkit.telemetry.server", "");
user_pref("toolkit.telemetry.server_owner", "");
user_pref("toolkit.telemetry.shutdownPingSender.enabled", false);
user_pref("toolkit.telemetry.unified", false);
user_pref("toolkit.telemetry.updatePing.enabled", false);
You will have to delete the distribution folder if you want it to ever update again.
And a few about:configs that maybe handy for some. Phone home stuff.
user_pref("toolkit.telemetry.archive.enabled", false);
user_pref("toolkit.telemetry.bhrPing.enabled", false);
user_pref("toolkit.telemetry.cachedClientID", "");
user_pref("toolkit.telemetry.firstShutdownPing.enabled", false);
user_pref("toolkit.telemetry.hybridContent.enabled", false);
user_pref("toolkit.telemetry.newProfilePing.enabled", false);
user_pref("toolkit.telemetry.previousBuildID", "");
user_pref("toolkit.telemetry.reportingpolicy.firstRun", false);
user_pref("toolkit.telemetry.server", "");
user_pref("toolkit.telemetry.server_owner", "");
user_pref("toolkit.telemetry.shutdownPingSender.enabled", false);
user_pref("toolkit.telemetry.unified", false);
user_pref("toolkit.telemetry.updatePing.enabled", false);
- Attachments
-
- disable-updates-ff.pet
- (444 Bytes) Downloaded 438 times
-
- Posts: 807
- Joined: Mon 12 Oct 2009, 17:11
@Smithy
You wrote:
I ask because I have had this recurring problem and have narrowed it down to occurring whenever the update is from a minor release, say 67.0.4 to a major release like 68.0.0. The update works if one is updating within the same release, say 67.0.1 to 67.0.4 (These are fictitious release numbers). I have a bug report in at bugzilla.
You wrote:
Are these links that were there before and are now broken or are these new links that you are now adding for the first time. In other words, a kludge?When updating the Firefox 68 through update, the links on the desktop
taskbar and openbox internet/firefox menu cease to function.
I ask because I have had this recurring problem and have narrowed it down to occurring whenever the update is from a minor release, say 67.0.4 to a major release like 68.0.0. The update works if one is updating within the same release, say 67.0.1 to 67.0.4 (These are fictitious release numbers). I have a bug report in at bugzilla.
[color=blue]B.K. Johnson
tahrpup-6.0.5 PAE (upgraded from 6.0 =>6.0.2=>6.0.3=>6.0.5 via quickpet/PPM=Not installed); slacko-5.7 occasionally. Frugal install, pupsave file, multi OS flashdrive, FAT32 , SYSLINUX boot, CPU-Dual E2140, 4GB RAM[/color]
tahrpup-6.0.5 PAE (upgraded from 6.0 =>6.0.2=>6.0.3=>6.0.5 via quickpet/PPM=Not installed); slacko-5.7 occasionally. Frugal install, pupsave file, multi OS flashdrive, FAT32 , SYSLINUX boot, CPU-Dual E2140, 4GB RAM[/color]
Hi, I've put up a slightly earlier version of Qtractor (0.831) in Smokey's Repository.
I think it might be a little better in the fiendishly complicated relationship
with Cadence, Jack Server and the QT5 libraries. Your mileage may vary, depending
on what computer, which way the wind is blowing etc..
I think it might be a little better in the fiendishly complicated relationship
with Cadence, Jack Server and the QT5 libraries. Your mileage may vary, depending
on what computer, which way the wind is blowing etc..
There is a Firefox 71 ADRV in Smokey's Repository. http://www.smokey01.com/Smithy/Artful%2 ... /Browsers/
Sound still OK in both regular kernel ISO and James Bond's RT Kernel Version.
And here is a little pet that fixes the desktop taskbar link that looks for the
Light Browser instead of Firefox. Restart X after installing the pet.
Sound still OK in both regular kernel ISO and James Bond's RT Kernel Version.
And here is a little pet that fixes the desktop taskbar link that looks for the
Light Browser instead of Firefox. Restart X after installing the pet.
- Attachments
-
- firefox-desktop-taskbar-fix.pet
- (1.32 KiB) Downloaded 202 times
-
- Desktop Taskbar LinkFix.png
- (4.54 KiB) Downloaded 268 times
Hi, I have put a 5 series kernel in Smokey’s repository. It is set to performance mode and the origin is from Lowtech’s gear It has got pwidgets in it ‘cos I wanted to see what’s going on.
Seems to be running ok in Artful. You just swap the zdrive and vmlinuz and reboot.
Seems to be running ok in Artful. You just swap the zdrive and vmlinuz and reboot.
- Attachments
-
- 5 series kernel.png
- (48.02 KiB) Downloaded 119 times
Hi, I've put a PulseAudio pet in Smokey's repo.
After installing, a restart of X server should run Pulse.
You can check this by entering htop in the terminal. There should be running entries for pulseaudio.
NOTES:
The default audio is set to load-module module-alsa-source device=hw:0,0
This can be found in /etc/pulseaudio/default.pa (if you need to change it to hw:x,x, whatever your hardware is)
Here are some commands that may be useful:
pulseaudio
Starts the service
pulseaudio -vvvvv
Gives a readout in terminal
pacmd list-sources | egrep '^\s+name: .*alsa_input'
pacmd list-sources | egrep '^\s+name:.*\.monitor'
pacmd list-sinks | egrep '^\s+name: .*alsa_output'
Lists Sources and sinks
pulseaudio --kill
Kills pulseaudio
After installing, a restart of X server should run Pulse.
You can check this by entering htop in the terminal. There should be running entries for pulseaudio.
NOTES:
The default audio is set to load-module module-alsa-source device=hw:0,0
This can be found in /etc/pulseaudio/default.pa (if you need to change it to hw:x,x, whatever your hardware is)
Here are some commands that may be useful:
pulseaudio
Starts the service
pulseaudio -vvvvv
Gives a readout in terminal
pacmd list-sources | egrep '^\s+name: .*alsa_input'
pacmd list-sources | egrep '^\s+name:.*\.monitor'
pacmd list-sinks | egrep '^\s+name: .*alsa_output'
Lists Sources and sinks
pulseaudio --kill
Kills pulseaudio
Any chance that pulse-module-jack could be added? Not sure
if it's in a standard repo yet. That allows for easy jamming/recording
with movies, streaming services etc
A wine-staging pet every 6 months or so would also
be a musical blessing. I have no idea the man-hours needed for such things,
I have a 90 gig bionic64 savefile that was working well, but my
win 7 partition where it resides, became lvm_2, and can't be accessed til I figure
out a Hirens or other recovery setup.
I was smart enough to regularly back up my Studio 1337 savefiles...
Cheers
if it's in a standard repo yet. That allows for easy jamming/recording
with movies, streaming services etc
A wine-staging pet every 6 months or so would also
be a musical blessing. I have no idea the man-hours needed for such things,
I have a 90 gig bionic64 savefile that was working well, but my
win 7 partition where it resides, became lvm_2, and can't be accessed til I figure
out a Hirens or other recovery setup.
I was smart enough to regularly back up my Studio 1337 savefiles...
Cheers
Can you post up some routing scenario ideas that you had in mind ciento ?
Easier would be ol’ school SMPTE timecode striped to a track maybe.
There’s this setup for noodling ideas I guess. If you need vlc jack let me know.
If someone wants to put a module together I will incorporate it and test for reliability.
Easier would be ol’ school SMPTE timecode striped to a track maybe.
There’s this setup for noodling ideas I guess. If you need vlc jack let me know.
If someone wants to put a module together I will incorporate it and test for reliability.
- Attachments
-
- Screenshot.png
- (66.59 KiB) Downloaded 297 times
here's what I often do
1. start qjackctl
2. command a2jmidid -j default
3. command /usr/bin/alsa_in -j HDA-intel "HDA Intel PCH" -q 1 2>&1 1> /dev/null
(this step utilizes HAL, as installed from a ppa, used in Ubuntu Studio 19.10)
4. launch Chrome browser
5. Start a movie
6. Pause the movie, and make a rakarrack effects chain that
fits the score
Start Yoshimi synth or Reaper if keyboard is desired instead of guitar.
VLC jack module would be great, as there are great downloaded youtubes
to jam/practice with. A jack module for SMplayer might also
be popular.
.w64 support in those media players would also be useful.
Is that a laundry list, or a grocery list ?
Cheers
1. start qjackctl
2. command a2jmidid -j default
3. command /usr/bin/alsa_in -j HDA-intel "HDA Intel PCH" -q 1 2>&1 1> /dev/null
(this step utilizes HAL, as installed from a ppa, used in Ubuntu Studio 19.10)
4. launch Chrome browser
5. Start a movie
6. Pause the movie, and make a rakarrack effects chain that
fits the score
Start Yoshimi synth or Reaper if keyboard is desired instead of guitar.
VLC jack module would be great, as there are great downloaded youtubes
to jam/practice with. A jack module for SMplayer might also
be popular.
.w64 support in those media players would also be useful.
Is that a laundry list, or a grocery list ?
Cheers