Puppy Linux Discussion Forum Forum Index Puppy Linux Discussion Forum
Puppy HOME page : puppylinux.com
"THE" alternative forum : puppylinux.info
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

The time now is Thu 19 Sep 2019, 08:38
All times are UTC - 4
 Forum index » Advanced Topics » Puppy Projects
Raspberry Pi Buster Raspup beta
Moderators: Flash, JohnMurga
Post new topic   Reply to topic View previous topic :: View next topic
Page 1 of 3 [33 Posts]   Goto page: 1, 2, 3 Next
Author Message
01micko


Joined: 11 Oct 2008
Posts: 8707
Location: qld

PostPosted: Sat 31 Aug 2019, 20:53    Post subject:  Raspberry Pi Buster Raspup beta
Subject description: Tested running on pi0,pi1.pi2,pi3,pi4
 

Raspup Buster edition beta release (20190915)

This is Puppy Linux optimised for the Raspberry Pi credit card sized (or smaller) computer. It contains all of the goodies you would expect of any Puppy Linux. It uses Raspbian Buster libraries and programs with extras compiled from source and scripted to fill the gaps.

It has been developed and tested on the Pi Zero Wifi, Pi 3, and Pi 4. One download will run on all of these boards and it should run on Pi 1 and Pi 2 (untested - edit 190915 tested on pi2 and pi1). IDK about compute module, probably not.

Download

http://01micko.com/raspup/raspup-8.1.1-12196ca.zip - main zip file (360MB - it has 3 kernels)
http://01micko.com/raspup/raspup-8.1.1-12196ca.zip.md5.txt - main file checksum
http://01micko.com/raspup/devx_raspup_8.1.1.sfs - devx (153MB)
http://01micko.com/raspup/devx_raspup_8.1.1.sfs.md5.txt - devx checksum

Sorry no kernel sources as yet. I have them but my bandwidth is garbage - NBN - Laughing UPDATE: well that comment was actually lack of NBN. I'm supposedly getting it on 26th September - we'll see.. Laughing

Installation

For new BETA instructions are the same - please use a fresh installation else we'll catch old bugs.

Use these instructions at your own risk

CLI (is the preferred method)

1. Grab sdcard or micro-sdcard (whatever fits your pi) and make 2 partitions, the first FAT32 of size 512MB, The second fills the rest of the card. Format that to ext2, ext3, ext4, f2fs, whichever.

2. Mount (as root, or sudo for Ubuntuers) the FIRST partition on the sdcard (FAT32) taking note of its mount point. It may be /mnt/sdc1 or /mnt/mmcblk0p1 or similar. It will be a 1

3. Go to the dir where you downloaded the zip file and run this:
Code:
ZIP=$(ls | grep -o raspup*zip|tail -1)
unzip $ZIP -d /mnt/MYMOUNTPOINT # this is the one you took note of earlier


4. if no errors occurred then unmount the card, remove from your card reader and poke it in the pi, power up and enjoy.

GUI

1. Grab sdcard or micro-sdcard (whatever fits your pi) and make 2 partitions, the first FAT32 of size 650MB, The second fills the rest of the card. Format that to ext2, ext3, ext4, f2fs, whichever.

2. make a new directory where you downloaded the zip file and extract the files in there. Copy all the files with drag'n'drop to MOUNTED FIRST partition of the sdcard, being sure NOT to copy the zip file as well

3. unmount the card, remove from your card reader and poke it in the pi, power up and enjoy.

----------------------------------------------------------------------------

Changes (20190915)

- new gui to set default boot option - in setup menu (brown mouse)
- improved Vivaldi installer that fetches proprietary ffmpeg codec if you so desire - note it doesn't install widevine needed for netflix. While it is possible it is convoluted. Instructions upon request. Please delete old vivaldi **.sfs as the naming is changed to reflect root or spot.
- bugfix the showing of quicksetup on every boot in pi1 and pi0. This was a woof level bug in /usr/sbin/delayedrun (proebler)
- added mhwaveedit - compiled (brown mouse)
- rebuilt gnome-mplayer using new source developed by wdlkmpx
- developed new drive icon to distinguish between the boot partition and the save partition (woof level)
- new kernels - 4.19.71
- fixed apulse pet - was broken
- added some missing libs to devx which fixed cmake
- add ralink wireless firmware (proebler)


TO DO

- add a proper chat program

----------------------------------------------------------------------------

This is a bit more polished than alpha and getting close to final which will be released as 8.2 hopefully by September 30.

Can anyone recommend a nice light chat program - preferably GUI and gtk2, but tcl/tk or fltk is ok. CLI is ok too if it fits the bill.

--

While this edition is almost feature complete there may be bugs (some woof level ones too)

If there is a feature you really need I'll consider adding it but i'd rather shrink the main file rather than grow it.

Enjoy!
pi0-htop.png
 Description   running on pi zero
 Filesize   103.06 KB
 Viewed   1139 Time(s)

pi0-htop.png

pi4-0.png
 Description   Running on Pi 4
 Filesize   42.58 KB
 Viewed   1137 Time(s)

pi4-0.png


_________________
Puppy Linux Blog - contact me for access

Last edited by 01micko on Sat 14 Sep 2019, 20:41; edited 3 times in total
Back to top
View user's profile Send private message Visit poster's website 
01micko


Joined: 11 Oct 2008
Posts: 8707
Location: qld

PostPosted: Sat 31 Aug 2019, 21:00    Post subject:  

Some features

* Midori GTK3 browser - it's quite capable
* glipper-lite (disciple)
* Install Vivaldi (yes!) it can install the latest stable or snapshot and run as root or spot! SFS is supported only.
* Overscan / Underscan GUI to help with HDMI monitor issues
* Boot menu to help with multiple save files. I can use the same sdcard on the 0, 3 and 4. Many thanks to woodenshoe-wi
* the correct kernel and modules load automatically for your board - again thanks to woodenshoe-wi for pioneering this approach (raspup stretch built from woof was his creation - never released)
* all the staple apps recompiled on pi 4 and 3 but still run fine on the Zero; abiword, inkscape-lite, sylpheed, osmo plus the underlying ones like curlftpfs, mpscan, nbtscan, jwm, gtkdialog, rox-filer (woodenshoe again!) plus more

Known issues

* mplayer / gnome-mplayer refuse to do full screen. I may ditch them and use omxplayer - but it doesn't play dvds (afaik)
* no chat client - the chat icon just opens midori at kiwiirc.com - a stop gap measure
* printing / scanning is untested

_________________
Puppy Linux Blog - contact me for access
Back to top
View user's profile Send private message Visit poster's website 
bigpup


Joined: 11 Oct 2009
Posts: 12571
Location: S.C. USA

PostPosted: Sat 31 Aug 2019, 23:25    Post subject:  

I suggest you put something in the first post subject specifically stating for Raspberry Pi computers.

That way the title of this topic will have Raspberry Pi in it.

That should help anyone searching for a Puppy version for the Raspberry Pi.

Thanks for working on this!!

_________________
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected Shocked
YaPI(any iso installer) http://www.murga-linux.com/puppy/viewtopic.php?t=107601
Back to top
View user's profile Send private message 
01micko


Joined: 11 Oct 2008
Posts: 8707
Location: qld

PostPosted: Sat 31 Aug 2019, 23:31    Post subject:  

bigpup wrote:
I suggest you put something in the first post subject specifically stating for Raspberry Pi computers.

That way the title of this topic will have Raspberry Pi in it.

That should help anyone searching for a Puppy version for the Raspberry Pi.

Thanks for working on this!!


ok Smile

_________________
Puppy Linux Blog - contact me for access
Back to top
View user's profile Send private message Visit poster's website 
01micko


Joined: 11 Oct 2008
Posts: 8707
Location: qld

PostPosted: Sat 31 Aug 2019, 23:31    Post subject:  

for later..
_________________
Puppy Linux Blog - contact me for access
Back to top
View user's profile Send private message Visit poster's website 
proebler

Joined: 24 Jan 2012
Posts: 152
Location: TAS

PostPosted: Sun 01 Sep 2019, 06:07    Post subject:  

Thanks for Raspup Buster.
I have successfully run it on an early PI 1, connecting to a TV via HDMI. However I could not get the network connection going through my TP-Link WiFi dongle .
The module rt73usb for the dongle appears loaded, but scanning fails with the error:
Failed to raise interface wlan0.
Failed command was: ifconfig wlan0 up
Error returned was ifconfig: SIOCSIFFLAGS: No such file or directory.
Back to top
View user's profile Send private message 
01micko


Joined: 11 Oct 2008
Posts: 8707
Location: qld

PostPosted: Sun 01 Sep 2019, 07:05    Post subject:  

Thanks for testing proebler

I've attached rt73.bin firmware.

gunzip it

Code:
gunzip rt73.bin.gz


..or clicking on it should work.

Put the resulting rt73.bin file on a usb stick, or copy it to the pi sdcard some where.

Fire up the pi and copy it to /lib/firmware. Reboot and report what happens.
rt73.bin.gz
Description  a real gzipped file
gz

 Download 
Filename  rt73.bin.gz 
Filesize  1.11 KB 
Downloaded  13 Time(s) 

_________________
Puppy Linux Blog - contact me for access
Back to top
View user's profile Send private message Visit poster's website 
Smithy


Joined: 12 Dec 2011
Posts: 1049

PostPosted: Sun 01 Sep 2019, 07:13    Post subject:  

Those screenies look great micko.
Could you do jack, qjackctl, qsynth and qsampler?
And does it hand off the usb drive totally?
Back to top
View user's profile Send private message 
Lobster
Official Crustacean


Joined: 04 May 2005
Posts: 15483
Location: Paradox Realm

PostPosted: Sun 01 Sep 2019, 14:20    Post subject:  

Posting from Vivaldi on the Rpi4 Very Happy

- Much, much improved from the pre alpha ... Cool
- I used Puppy 8 BionicPup on an x86 and setup using Gparted and Micks GUI instructions ...
- Midori is good but Vivaldi (which will take getting used to for non Opera users) is a more accomplished/modern browser ... A downloader is included in the menu Idea
- The devx seems working, only tested Python Rolling Eyes
- The internet and my plantronics headphones plugged into USB3 were playing the internet radio (available)
- This is an accomplished start, very excited that it works across so many Rpi editions ... Anyone got a second edition Rpi to test it on?

Bravo Mick, Well done. Mr. Green

We are Groot - wait that is another story ... Rolling Eyes Embarassed
We are the ARM of Puppi

_________________
NEW Raspup for Raspberry Pi1-4 In BETA testing NOW
Slackware Current ScPup 32 and 64bit
Back to top
View user's profile Send private message Visit poster's website 
josejp2424


Joined: 01 Aug 2010
Posts: 492

PostPosted: Sun 01 Sep 2019, 21:21    Post subject: raspberry p2  

hi 01micko

This puppy is working on a raspberry pi2.
very good alpha. Thank you

are you going to compile firefox 68? .

_________________
Shiba Inu | Pupjibaro jessie | My Blog
Back to top
View user's profile Send private message Visit poster's website 
dancytron

Joined: 18 Jul 2012
Posts: 1358

PostPosted: Sun 01 Sep 2019, 21:40    Post subject:  

Glad to see you are using Raspbian as a base. That should open up a whole bunch of stuff that the Raspberry Pi community does.

I'll have to get another Pi and check it out (I had one of the first ones that I used as a printer server after I got through playing with it, but I stepped on it in the middle of the night. Not recommended, they are sharp little buggers.)
Back to top
View user's profile Send private message 
Lobster
Official Crustacean


Joined: 04 May 2005
Posts: 15483
Location: Paradox Realm

PostPosted: Mon 02 Sep 2019, 10:17    Post subject: recording sound via a device  

Sound is working on the USB Plantronics headphone/mic
but despite trying various settings, recording is registering on the VU meter but not saving or recording ...

The enclosed may give some clues?

Code:
==========================================
     /tmp/services/10alsa.start.log       
==========================================
modprobe: FATAL: Module snd-mixer-oss not found in directory /lib/modules/4.19.69-v7l+
modprobe: FATAL: Module snd-seq-oss not found in directory /lib/modules/4.19.69-v7l+
modprobe: FATAL: Module snd-pcm-oss not found in directory /lib/modules/4.19.69-v7l+
Raspberry Puppy 8.1
Linux puppypc8048 4.19.69-v7l+ #1 SMP Sat Aug 31 15:57:52 AEST 2019 armv7l GNU/Linux

Waiting 0.5 seconds
Waiting 0.5 seconds
Waiting 0.5 seconds
Waiting 0.5 seconds
Waiting 0.5 seconds
Waiting 0.5 seconds
Waiting 0.5 seconds
Waiting 0.5 seconds
Waiting 0.5 seconds
Waiting 0.5 seconds

Warning: /dev/mixer is missing

 0 snd_bcm2835
 1 snd_usb_audio

###################################################
 0 [ALSA           ]: bcm2835_alsa - bcm2835 ALSA
                      bcm2835 ALSA
 1 [USB            ]: USB-Audio - Plantronics .Audio 628 USB
                      Plantronics Plantronics .Audio 628 USB at usb-0000:01:00.0-1.1, full speed
###################################################

###################################################
snd_usb_audio         188416  0
snd_hwdep              16384  1 snd_usb_audio
snd_usbmidi_lib        32768  1 snd_usb_audio
snd_bcm2835            24576  0
snd_pcm                98304  2 snd_usb_audio,snd_bcm2835
snd_seq_midi           16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
snd_rawmidi            32768  2 snd_seq_midi,snd_usbmidi_lib
snd_seq                69632  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              32768  2 snd_seq,snd_pcm
snd                    77824  9 snd_hwdep,snd_seq,snd_usb_audio,snd_timer,snd_rawmidi,snd_usbmidi_lib,snd_seq_device,snd_bcm2835,snd_pcm
###################################################

# alsactl -d -f /etc/asound.state restore
alsactl: set_controls:1479: device='hw:0', doit=0
alsactl: set_controls:1491: card-info-id: 'ALSA'
alsactl: set_controls:1517: maxnumid=5
alsactl: set_controls:1535: result code: 0
alsactl: set_controls:1479: device='hw:0', doit=1
alsactl: set_controls:1491: card-info-id: 'ALSA'
alsactl: set_controls:1517: maxnumid=5
alsactl: set_controls:1535: result code: 0
alsactl: set_controls:1479: device='hw:1', doit=0
alsactl: set_controls:1491: card-info-id: 'USB'
alsactl: set_controls:1517: maxnumid=9
alsactl: set_controls:1535: result code: 0
alsactl: set_controls:1479: device='hw:1', doit=1
alsactl: set_controls:1491: card-info-id: 'USB'
alsactl: set_controls:1517: maxnumid=9
alsactl: set_controls:1535: result code: 0
alsactl: exit code 0



/var/local/mscw/selected: card 1: USB [Plantronics .Audio 628 USB], device 0: USB Audio [USB Audio]
-----------------------

==========================================
     /tmp/services/mscw.start.log         
==========================================

Retrovol is running


---------- /etc/asound.conf ---------
defaults.pcm.card 1
defaults.pcm.device 0
defaults.ctl.card 1
-------------------------------------

------------ .retrovolrc ------------
#card=hw:0
card=hw:1
-------------------------------------

Advanced Linux Sound Architecture Driver Version k4.19.69-v7l+.

 0 snd_bcm2835
 1 snd_usb_audio

################################################### cards
 0 [ALSA           ]: bcm2835_alsa - bcm2835 ALSA
                      bcm2835 ALSA
 1 [USB            ]: USB-Audio - Plantronics .Audio 628 USB
                      Plantronics Plantronics .Audio 628 USB at usb-0000:01:00.0-1.1, full speed
###################################################

################################################### aplay -l
card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 IEC958/HDMI [bcm2835 IEC958/HDMI]
card 0: ALSA [bcm2835 ALSA], device 2: bcm2835 IEC958/HDMI1 [bcm2835 IEC958/HDMI1]
card 1: USB [Plantronics .Audio 628 USB], device 0: USB Audio [USB Audio]
###################################################

################################################### pcm
00-00: bcm2835 ALSA : bcm2835 ALSA : playback 7
00-01: bcm2835 IEC958/HDMI : bcm2835 IEC958/HDMI : playback 1
00-02: bcm2835 IEC958/HDMI1 : bcm2835 IEC958/HDMI1 : playback 1
01-00: USB Audio : USB Audio : playback 1 : capture 1
###################################################

################################################### devices
  0: [ 0]   : control
  1:        : sequencer
 16: [ 0- 0]: digital audio playback
 17: [ 0- 1]: digital audio playback
 18: [ 0- 2]: digital audio playback
 32: [ 1]   : control
 33:        : timer
 48: [ 1- 0]: digital audio playback
 56: [ 1- 0]: digital audio capture
###################################################




==========================================
            Sound Card Wizard             
==========================================

---------- /etc/asound.conf ---------
defaults.pcm.card 1
defaults.pcm.device 0
defaults.ctl.card 1
-------------------------------------

------------ .retrovolrc ------------
#card=hw:0
card=hw:1
-------------------------------------

Advanced Linux Sound Architecture Driver Version k4.19.69-v7l+.

 0 snd_bcm2835
 1 snd_usb_audio

################################################### cards
 0 [ALSA           ]: bcm2835_alsa - bcm2835 ALSA
                      bcm2835 ALSA
 1 [USB            ]: USB-Audio - Plantronics .Audio 628 USB
                      Plantronics Plantronics .Audio 628 USB at usb-0000:01:00.0-1.1, full speed
###################################################

################################################### aplay -l
card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 IEC958/HDMI [bcm2835 IEC958/HDMI]
card 0: ALSA [bcm2835 ALSA], device 2: bcm2835 IEC958/HDMI1 [bcm2835 IEC958/HDMI1]
card 1: USB [Plantronics .Audio 628 USB], device 0: USB Audio [USB Audio]
###################################################

################################################### pcm
00-00: bcm2835 ALSA : bcm2835 ALSA : playback 7
00-01: bcm2835 IEC958/HDMI : bcm2835 IEC958/HDMI : playback 1
00-02: bcm2835 IEC958/HDMI1 : bcm2835 IEC958/HDMI1 : playback 1
01-00: USB Audio : USB Audio : playback 1 : capture 1
###################################################

################################################### devices
  0: [ 0]   : control
  1:        : sequencer
 16: [ 0- 0]: digital audio playback
 17: [ 0- 1]: digital audio playback
 18: [ 0- 2]: digital audio playback
 32: [ 1]   : control
 33:        : timer
 48: [ 1- 0]: digital audio playback
 56: [ 1- 0]: digital audio capture
###################################################



==========================================
          lspci | grep -i audio           
==========================================
---
xorg driver: fbdev
---

==========================================
     /etc/modprobe.d/alsa-base.conf       
==========================================
# BK got this file from Ubuntu, May 2011.
# autoloader aliases
install sound-slot-0 /sbin/modprobe snd-card-0
install sound-slot-1 /sbin/modprobe snd-card-1
install sound-slot-2 /sbin/modprobe snd-card-2
install sound-slot-3 /sbin/modprobe snd-card-3
install sound-slot-4 /sbin/modprobe snd-card-4
install sound-slot-5 /sbin/modprobe snd-card-5
install sound-slot-6 /sbin/modprobe snd-card-6
install sound-slot-7 /sbin/modprobe snd-card-7

# Cause optional modules to be loaded above generic modules
install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; }
#
# Workaround at bug #499695 (reverted in Ubuntu see LP #319505)
install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; }
install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; }
install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; }
#
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
# Cause optional modules to be loaded above sound card driver modules
install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; }
install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; }

# Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway)
install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; }
# Prevent abnormal drivers from grabbing index 0
options bt87x index=-2
options cx88_alsa index=-2
options saa7134-alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
options snd-usb-audio index=-2
options snd-usb-caiaq index=-2
options snd-usb-ua101 index=-2
options snd-usb-us122l index=-2
options snd-usb-usx2y index=-2
# Ubuntu #62691, enable MPU for snd-cmipci
options snd-cmipci mpu_port=0x330 fm_port=0x388
# Keep snd-pcsp from being loaded as first soundcard
options snd-pcsp index=-2
# Keep snd-usb-audio from beeing loaded as first soundcard
options snd-usb-audio index=-2

_________________
NEW Raspup for Raspberry Pi1-4 In BETA testing NOW
Slackware Current ScPup 32 and 64bit
Back to top
View user's profile Send private message Visit poster's website 
proebler

Joined: 24 Jan 2012
Posts: 152
Location: TAS

PostPosted: Mon 02 Sep 2019, 18:41    Post subject:
Subject description: Testing on early Pi 1
 

The rt73.bin in /lib/firmware got the WiFi dongle working ok. Thanks.
Running with a save folder in the SD card's ext2 partition, the WiFi network auto connects.

I note, that with the use of the save folder, the boot process is a lot faster.
The Quick Setup -with my preferences already set - and the Welcome windows appear at each boot (they ought not to).

I could not get the sound working. With any of the listed sound cards, testing produces some hiss from the TV speaker (rather than the expected 'left'-'right'-'left'-'right') .

This is part of the mscw-report:
==========================================
/tmp/services/10alsa.start.log
==========================================
modprobe: FATAL: Module snd-mixer-oss not found in directory /lib/modules/4.19.69+
modprobe: FATAL: Module snd-seq-oss not found in directory /lib/modules/4.19.69+
modprobe: FATAL: Module snd-pcm-oss not found in directory /lib/modules/4.19.69+
Raspberry Puppy 8.1
Linux puppypc31345 4.19.69+ #1 Sat Aug 31 16:28:20 AEST 2019 armv6l GNU/Linux

Waiting 0.5 seconds
Waiting 0.5 seconds
Waiting 0.5 seconds
Waiting 0.5 seconds
Waiting 0.5 seconds
Waiting 0.5 seconds
Waiting 0.5 seconds
Waiting 0.5 seconds
Waiting 0.5 seconds
Waiting 0.5 seconds

Warning: /dev/mixer is missing

0 snd_bcm2835

###################################################
0 [ALSA ]: bcm2835_alsa - bcm2835 ALSA
bcm2835 ALSA
###################################################

###################################################
snd_bcm2835 16617 0
snd_pcm 90946 1 snd_bcm2835
snd_seq_midi 5919 0
snd_seq_midi_event 6848 1 snd_seq_midi
snd_rawmidi 22335 1 snd_seq_midi
snd_seq 59468 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 5304 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 23031 2 snd_seq,snd_pcm
snd 62443 6 snd_seq,snd_timer,snd_rawmidi,snd_seq_device,snd_bcm2835,snd_pcm
###################################################

# alsactl -d -f /etc/asound.state restore
alsactl: set_controls:1479: device='hw:0', doit=0
alsactl: set_controls:1491: card-info-id: 'ALSA'
alsactl: set_controls:1517: maxnumid=5
alsactl: set_controls:1535: result code: 0
alsactl: set_controls:1479: device='hw:0', doit=1
alsactl: set_controls:1491: card-info-id: 'ALSA'
alsactl: set_controls:1517: maxnumid=5
alsactl: set_controls:1535: result code: 0
alsactl: exit code 0



/var/local/mscw/selected: card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 IEC958/HDMI [bcm2835 IEC958/HDMI]
-----------------------

==========================================
/tmp/services/mscw.start.log
==========================================
Advanced Linux Sound Architecture Driver Version k4.19.69+.

0 snd_bcm2835

################################################### cards
0 [ALSA ]: bcm2835_alsa - bcm2835 ALSA
bcm2835 ALSA
###################################################

################################################### aplay -l
card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 IEC958/HDMI [bcm2835 IEC958/HDMI]
card 0: ALSA [bcm2835 ALSA], device 2: bcm2835 IEC958/HDMI1 [bcm2835 IEC958/HDMI1]
###################################################

#############################################
###################################################
###### pcm
00-00: bcm2835 ALSA : bcm2835 ALSA : playback 7
00-01: bcm2835 IEC958/HDMI : bcm2835 IEC958/HDMI : playback 1
00-02: bcm2835 IEC958/HDMI1 : bcm2835 IEC958/HDMI1 : playback 1
################################################### devices
Back to top
View user's profile Send private message 
Lobster
Official Crustacean


Joined: 04 May 2005
Posts: 15483
Location: Paradox Realm

PostPosted: Mon 02 Sep 2019, 22:21    Post subject:  

Hi Mick Very Happy

Pleased to report that I am posting from the Raspberry Pi 3 Model B+
... using the same microSD card that I booted the Rpi4 from ... Cool

So I now have two save folders and hence two boot options runnning two computers.
With a micro to SD adapter (pretty standard when you buy Micro-SD) I could I assume even run the original Rpi0?

That is very cool. One day we may boot into x86 and Rpi all from the same micro SD card Rolling Eyes [lobster faints] Wink

Interestingly the overscan facility did not have to be used
I used the same HDMI TV/monitor as for the raspberry pi 4 where I had to use the overscan utility.

One of the uncanny things about the Rpi being solid state, it is totally silent.
My mouse and keyboard have never seemed so loud ... Shocked

Puppy Linux
A Good Boy

_________________
NEW Raspup for Raspberry Pi1-4 In BETA testing NOW
Slackware Current ScPup 32 and 64bit
Back to top
View user's profile Send private message Visit poster's website 
Brown Mouse

Joined: 09 Jun 2009
Posts: 531
Location: Canary Islands

PostPosted: Tue 03 Sep 2019, 13:18    Post subject:  

Testing on a RPI 3 B model.
Made a save folder and running from an ext4 partition.
Looking great so far with working sound and WiFi connected.
Tried to install Flash player via the menu tab but doesn’t seem to run so manually installed.
No sound or video in Midori browser as yet.

Thanks for this Mick..
Back to top
View user's profile Send private message 
Display posts from previous:   Sort by:   
Page 1 of 3 [33 Posts]   Goto page: 1, 2, 3 Next
Post new topic   Reply to topic View previous topic :: View next topic
 Forum index » Advanced Topics » Puppy Projects
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group
[ Time: 0.1352s ][ Queries: 12 (0.0196s) ][ GZIP on ]