"Spurious 8259A interrupt: IRQ7" error msg (Solved
"Spurious 8259A interrupt: IRQ7" error msg (Solved
On my type 2 install of MurgaPuppy 1.0.1, I suddenly am getting message of "spurious 8259A interrupt: IRQ7" just after what should be final shutdown message. It then hangs and only way to shut off computer is to pull wall plug. Ideas?
This is a P2 desktop with abit motherboard, 366 celeron processor, and 256mb ram. I've run win, BeOS, and various distributions of linux on it (including a progression of Puppies) with no such problem before. At least not that I remember.
This "spurious" hangup now occurs with 1.0.4 cd Puppy also. I have reset all bios defaults but made no difference.
This "spurious" hangup now occurs with 1.0.4 cd Puppy also. I have reset all bios defaults but made no difference.
No you misunderstand. I have run Puppy from at least back to 0.8.6 to 1.0.4. All worked correctly with no error until yesterday. Now Puppy and Mepis both give the "spurious" error right after power down and then hang. As well as live cd versions of linux, booted from cdrom. This 'spurious' message just started out of the blue. Not because I suddenly used a new variety of Puppy or any other operating system.
Thats why my first notion was to reset to default everything in bios, thinking some setting got changed somehow. That however didnt help. All varieties of Puppy still run fine, computer just wont shut down properly.
Thats why my first notion was to reset to default everything in bios, thinking some setting got changed somehow. That however didnt help. All varieties of Puppy still run fine, computer just wont shut down properly.
Ok, read bunch of google stuff. Didnt seem to apply since all I read about had this problem when first installing linux with 2.4.x kernel on their computer.
Did try swapping graphics cards since some said this fixed their problem. No change. Then moved graphics card to different pci slot. Voila. That solved it. Guess it was a hardware failure problem. Lucky I have plenty slots unlike some cheapo modern motherboards with one or two slots.
Did try swapping graphics cards since some said this fixed their problem. No change. Then moved graphics card to different pci slot. Voila. That solved it. Guess it was a hardware failure problem. Lucky I have plenty slots unlike some cheapo modern motherboards with one or two slots.
If the problem resurfaces try reseating or changing your RAM as it now is showing up as a hardware problem, I have found that the CPUs usually just die or need reseating.
Maybe the whole system could do with a complete unplug and reseat all hardware and connectors as over time oxidization can cause problems at times.
Maybe the whole system could do with a complete unplug and reseat all hardware and connectors as over time oxidization can cause problems at times.