Packages moved to http://www.murga.org/~puppy/viewtopic.php?t=2258
New tested hcfmodem.pup package available -- download below. The new hsfmodem.pup should be up in a day or two.
Changes
1) Should work "out of the box" hopefully
2) Displays your modem pci vendor/device id for use in configuring.
3) Skips the need to re-enter the pci vendor/device ids and other values set during the initial installation when re-running the modem setup program.
4) pci vendor/device ids and other info can be change by running hcfpciconfig (or hsfconfig for the hsf drivers)
Sample output from running the setup. The bolded text are the values I entered.
******************************************************
** PCI Vendor ID = 14f1 PCI Device ID = 1033 **
******************************************************
Linux HCF controllerless modem drivers, version 0.99mbsibeta02123100
WARNING: this is an EXPERIMENTAL BETA VERSION of the HCF drivers for Linux.
USE AT YOUR OWN RISK! See the file /usr/lib/hcfpci/LICENSE for details.
Conexant Systems neither distributes nor maintains this package.
PLEASE DO NOT CONTACT CONEXANT REGARDING THIS SOFTWARE!!!
If you require assistance or need more information, go to:
http://www.mbsi.ca/cnxtlindrv
Should we attempt to automatically configure your hardware? [yes]
n
Is the modem presently installed in your system? [yes]
n
Please enter your modem's PCI Vendor ID []:
14f1
Please enter your modem's PCI Device ID []:
1033
1) /etc/hcfpci/inf/hcfv90_lan_linux.inf
2) /etc/hcfpci/inf/hcfv90_linux.inf
3) /etc/hcfpci/inf/hcfv92_linux.inf
4) /etc/hcfpci/inf/hcfv92_riptide_linux.inf
5) None of the above
Which INF file would you like to use with your HCF modem? (1-5)
2
Selected PCI VendorID=14f1 DeviceID=1033
and INF file /etc/hcfpci/inf/hcfv90_linux.inf
Unable to determine country, defaulting to "USA"
Configuring modem for country: "USA"
You can change this setting later with the command "hcfpciconfig --country"
This package does not contain pre-built modules suitable for your system:
Distribution: unknown-unknown
Kernel arch: i686
Kernel version: linux-2.4.29
Please obtain the appropriate variant of this package for your system
or try the generic RPM or tar version.
Using /lib/modules/2.4.29/hsfmodem/hcfpciosspec.o.gz
Warning: loading /lib/modules/2.4.29/hsfmodem/hcfpciosspec.o.gz will taint the k ernel: non-GPL license - Copyright (C) 1996-2002 Conexant Systems Inc. All Right s Reserved.
See
http://www.tux.org/lkml/#export-tainted for information about tainted modu les
Module hcfpciosspec loaded, with warnings
Using /lib/modules/2.4.29/hsfmodem/hcfpciengine.o.gz
Warning: loading /lib/modules/2.4.29/hsfmodem/hcfpciengine.o.gz will taint the k ernel: non-GPL license - Copyright (C) 1996-2002 Conexant Systems Inc. All Right s Reserved.
See
http://www.tux.org/lkml/#export-tainted for information about tainted modu les
Module hcfpciengine loaded, with warnings
Using /lib/modules/2.4.29/hsfmodem/hcfpciserial.o.gz
Linux HCF controllerless modem drivers, version 0.99mbsibeta02123100
WARNING: this is an EXPERIMENTAL BETA VERSION of the HCF drivers for Linux.
USE AT YOUR OWN RISK! See the file /usr/lib/hcfpci/LICENSE for details.
Conexant Systems neither distributes nor maintains this package.
PLEASE DO NOT CONTACT CONEXANT REGARDING THIS SOFTWARE!!!
If you require assistance or need more information, go to:
http://www.mbsi.ca/cnxtlindrv
Your HCF modem should now be accessible as /dev/ttySHCF0
or through the symbolic link /dev/modem.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
As usu. feedback welcome.