Armada M300: Wont allow 1024x768...keeps going to 800x600

Problems and successes with specific brands/models of computer video hardware
Post Reply
Message
Author
malangbaba
Posts: 22
Joined: Thu 30 Aug 2007, 00:21

Armada M300: Wont allow 1024x768...keeps going to 800x600

#1 Post by malangbaba »

Just installed Puppy 2.17 on a Compaq Armada M300 (PIII 500Mhz ATI Rage LT Pro 4MB SGRAM)
- the QuickSpecs indicate that it should support 1024x768 resolution
- When I had Win98 it would switch to 1024x768 but would make the desktop bigger than the screen....and if i moved the mouse to the corner it would scrool over to reveal rest of desktop....

Thought in whether this resolution should be possible? And what I could do to force it?

I tried forcing thru Xorg but it still defaults to 800x600

(Im newbie to linux....so walk me thru it)

---------------------------------------------------------------

#Special base config file used in Puppy Linux.

# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
Load "synaptics"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the font modules
Load "type1"
Load "freetype"

# This loads the GLX module
Load "glx"

# This loads xtrap extension, used by xrandr
Load "xtrap"

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11R7/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)

FontPath "/usr/X11R7/lib/X11/fonts/misc/"
FontPath "/usr/X11R7/lib/X11/fonts/Type1/"
FontPath "/usr/X11R7/lib/X11/fonts/TTF/"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.

# Option "DontVTSwitch"

# Enables mode switching with xrandr
# There is a report that this can cause Xorg not to work on some
# video hardware, so default is commented-out...
# but i want to use it in xorgwizard so leave on...

Option "RandR" "on"

EndSection

#everything past here is auto-generated by Puppy's Xorg Wizard...


Section "ServerLayout"
InputDevice "Synaptics Mouse" "AlwaysCore"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc102"
Option "XkbLayout" "us" #xkeymap0
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto" #mouse0protocol
Option "Device" "/dev/mouse"
Option "Emulate3Buttons"
Option "Emulate3Timeout" "50"
Option "ZAxisMapping" "4 5" #scrollwheel
EndSection

Section "InputDevice"
Identifier "Synaptics Mouse"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "225"
Option "MaxTapMove" "225"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.10"
Option "MaxSpeed" "0.30"
Option "AccelFactor" "0.0030"
Option "SHMConfig" "on"
#Option "Repeater" "/dev/ps2mouse"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 31.5-48.5
VertRefresh 40-70
#UseModes "Modes0" #monitor0usemodes
EndSection

Section "Modes"
Identifier "Modes0"
#modes0modeline0
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "accel" # [<bool>]
#Option "crt_display" # [<bool>]
#Option "composite_sync" # [<bool>]
#Option "hw_cursor" # [<bool>]
#Option "linear" # [<bool>]
#Option "force_pci_mode" # [<bool>]
#Option "dma_mode" # <str>
#Option "agp_mode" # <i>
#Option "agp_size" # <i>
#Option "local_textures" # [<bool>]
#Option "buffer_size" # <i>
#Option "tv_out" # [<bool>]
#Option "tv_standard" # <str>
#Option "mmio_cache" # [<bool>]
#Option "test_mmio_cache" # [<bool>]
#Option "panel_display" # [<bool>]
#Option "probe_clocks" # [<bool>]
#Option "reference_clock" # <freq>
#Option "shadow_fb" # [<bool>]
#Option "sw_cursor" # [<bool>]
Identifier "Card0"
Driver "ati" #card0driver
VendorName "ATI"
BoardName "3D Rage LT Pro"
ChipSet "ati"
ChipId 0x4c49
ChipRev 0xdc
BusID "PCI:0:5:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
Subsection "Display"
Depth 16
Modes "1024x768"
EndSubsection
EndSection

#PuppyHardwareProfile=ATI_MACH64

ieee488
Posts: 210
Joined: Mon 03 Sep 2007, 23:11

#2 Post by ieee488 »

With an older laptop, maybe try VESA.

On my old Tosbhia 2065CDS, Xorg only would allow setting the video to 600x480, but VESA let me set it to 800x600x24 among other choices.

malangbaba
Posts: 22
Joined: Thu 30 Aug 2007, 00:21

#3 Post by malangbaba »

Hmm...XVesa didnt work....it defaults to 640x480

malangbaba
Posts: 22
Joined: Thu 30 Aug 2007, 00:21

#4 Post by malangbaba »

^^^still no luck^^^

installed Zenwalk on laptop as well and it defaults to 800x600 as well

found some materials online that show the same laptop and model getting 1024x680 with linux (altho using ZFree86 rather than Xorg)
http://www.cnbc.cmu.edu/~plaut/m300/
http://www.cnbc.cmu.edu/~plaut/m300/XF86Config.XGA

Post Reply