If you have the symptom that having installed the HP 1020 using the foo2zjs driver the print job disappears and no printing takes place - then the issue is that the firmware file has not been sent to the printer.
You must use hotplug and udev rules to sense when the printer is connected to usb - and when it is turned on - to send the firmware patch to the printer.
Thankyou mauritroviano - your post enabled me to get the hotplug udev scripts going - just need to follow the instructions very carefully - I think the ln -s files are the wrong way around though - but other than that worked perfectly.
Request CUPS compiled HP LaserJet 1020 driver/firmware
-
- Posts: 1
- Joined: Wed 28 Oct 2009, 12:59
I am have a problem regarding HP 1020. It won't work...
regards,
cameron
http://simulationpretimmobilier.net/sim ... ation-pret
regards,
cameron
http://simulationpretimmobilier.net/sim ... ation-pret
Manually loading firmware?
Ok, I may be wrong about causality, as I new to any linux, but the solution works.
I had a similar problem in Puppeee (Puppy for EEE pc) - it did not automatically send firmware to HP Laserjet 1000. The drivers for the printer had been installed using foo2zjs-i486.pet, still, no printing could be done.
Manually loading HP Laserjet 1000 firmware:
1. Turn on Printer, PC, plug in USB cable.
2. Type in console:
cat /usr/share/foo2zjs/firmware/sihp1000.dl > /dev/usb/lp0
(If successful, the printer will make some sound).
3. Print.
I made a shell script from 2 step, so there is little trouble printing.
If you start printing before loading firmware, then you will not be able to load firmware. Unplug USB, cancel all jobs in CUPS, plug in USB and repeat from step 1.
How could I make the process automatic, on boot?
I had a similar problem in Puppeee (Puppy for EEE pc) - it did not automatically send firmware to HP Laserjet 1000. The drivers for the printer had been installed using foo2zjs-i486.pet, still, no printing could be done.
Manually loading HP Laserjet 1000 firmware:
1. Turn on Printer, PC, plug in USB cable.
2. Type in console:
cat /usr/share/foo2zjs/firmware/sihp1000.dl > /dev/usb/lp0
(If successful, the printer will make some sound).
3. Print.
I made a shell script from 2 step, so there is little trouble printing.
If you start printing before loading firmware, then you will not be able to load firmware. Unplug USB, cancel all jobs in CUPS, plug in USB and repeat from step 1.
How could I make the process automatic, on boot?
HP Laserjet 1020 has worked for me with most puppies with this:
http://www.datafilehost.com/download-bf13c069.html
it is foo2xxx package which creates hotplugin folder and feeds firmware to printer without need to use any scripts.
http://www.datafilehost.com/download-bf13c069.html
it is foo2xxx package which creates hotplugin folder and feeds firmware to printer without need to use any scripts.
Will this work with a HP LaserJet P1006?pemasu wrote:HP Laserjet 1020 has worked for me with most puppies with this:
http://www.datafilehost.com/download-bf13c069.html
it is foo2xxx package which creates hotplugin folder and feeds firmware to printer without need to use any scripts.
What about a HP Photosmart C4480?
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
the above just worked for me on the following specs:HP Laserjet 1020 has worked for me with most puppies with this:
http://www.datafilehost.com/download-bf13c069.html
Sony viao laptop
puppy lucid 5.20 frugal
hp laserjet 1020
thanks for making it simple!