Gnomad2 v2.9.6 + libmtp for MP3 players
THAK YOU tempestuous .
my old mp3 player is still working.
Windows7 does not support it enymoare (is child of ms not ricognized animoare).
as usual I can relay to puppy linux comunity, so i can sntrasfere new music in my old creative mp3. also now that I muved to puppy 528.
thaks again (why is not in the repository?)
my old mp3 player is still working.
Windows7 does not support it enymoare (is child of ms not ricognized animoare).
as usual I can relay to puppy linux comunity, so i can sntrasfere new music in my old creative mp3. also now that I muved to puppy 528.
thaks again (why is not in the repository?)
Nomad still going strong
I used the pets in 4.1.3 and in 5.2.5tempestuous wrote:UPDATE:
For Gnomad2 to work in the Puppy 2.x series (and avoid a lockup) it appears that libusb must be upgraded to version 0.1.12, now attached.
Gnomad2-2.9.4 should work OK in Puppy 3.x/4.x without any additional libraries.
Gnomad2-2.9.6 should work fine in Puppy Lucid 5.x
Now looking at Jemimah's Saluki do you think that the 2.9.6 pet will work in Saluki?
Thanks
D
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
Gnomad2 v2.9.6 + libmtp for MP3 players failed
Hi,
i've download the puppy 5.2. package of gnomad for connect via MTP my smartphone Nolia lumia 920.
the program say "no device connect to usb".
Suggestions?
Many thanks in advance
Roberto
i've download the puppy 5.2. package of gnomad for connect via MTP my smartphone Nolia lumia 920.
the program say "no device connect to usb".
Suggestions?
Many thanks in advance
Roberto
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
Experimental udev update for Nokia 920 was unsuccessful.
Attachment now removed.
Attachment now removed.
Last edited by tempestuous on Wed 01 Jan 2014, 04:06, edited 1 time in total.
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
According to Google, recognition of the Nokia Lumia 920 under Windows is problematic, and I suspect the same may be true under Linux. The recommended fix is:
i) Turn off the phone, then plug it into the USB port of your running Puppy computer, then turn the phone on.
ii) Then launch the relevant application - in this case Gnomad2.
I also read that long USB cables might be a problem - try connecting with a short USB cable.
i) Turn off the phone, then plug it into the USB port of your running Puppy computer, then turn the phone on.
ii) Then launch the relevant application - in this case Gnomad2.
I also read that long USB cables might be a problem - try connecting with a short USB cable.
Gnomad2 v2.9.6 + libmtp for MP3 players
Hi Tempestious,
nothing to do..
Installed gnomad, then your patch for nokia 920 , reboot.
Connect nokia power off, started, then loaded gnomad, but it's the same old story:" No juboxes found on usb bus".
Maybe i can upgrade usblib on puppy?
Thanks
Roberto iw2evk
nothing to do..
Installed gnomad, then your patch for nokia 920 , reboot.
Connect nokia power off, started, then loaded gnomad, but it's the same old story:" No juboxes found on usb bus".
Maybe i can upgrade usblib on puppy?
Thanks
Roberto iw2evk
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
Ted Dog, I need to know the USB device ID of your Samsung.
Please connect the phone to the USB port of a Puppy computer, then run this command -
Please connect the phone to the USB port of a Puppy computer, then run this command -
Code: Select all
lsusb
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
OK, I just repackaged gnomad2 with the latest v1.1.6 libmtp libraries - the link is in the first post.
iw2evk, your Nokia Lumia 920 is definitely supported now, but you may see your device displayed as "Nokia Lumia WP8".
Ted Dog, I see extensive support in this new code for Samsung Galaxy devices, and I see some notes that the default mode for Galaxy phones is MTP ... but it appears this mode can be changed to UMS (standard USB mode).
If true, it means you don't need to be locked into using MTP (and Gnomad2) for transferring music files to your phone - you should be able to change the mode (somewhere in the menu) to UMS mode, then your transfers can be via conventional file browsers, such as ROX.
If you want to see what I'm talking about, download the source code for libmtp-1.1.6 and have a look at /src/music-players.h
iw2evk, your Nokia Lumia 920 is definitely supported now, but you may see your device displayed as "Nokia Lumia WP8".
Ted Dog, I see extensive support in this new code for Samsung Galaxy devices, and I see some notes that the default mode for Galaxy phones is MTP ... but it appears this mode can be changed to UMS (standard USB mode).
If true, it means you don't need to be locked into using MTP (and Gnomad2) for transferring music files to your phone - you should be able to change the mode (somewhere in the menu) to UMS mode, then your transfers can be via conventional file browsers, such as ROX.
If you want to see what I'm talking about, download the source code for libmtp-1.1.6 and have a look at /src/music-players.h
Gnomad2 v2.9.6 + libmtp for MP3 players
Hi Tempestous and happy new year ...
I've instelled your last build but don't work :
see in attachment the reply of mtpdetect :
-------------------------------------------------------------------------------------
Unable to open ~/.mtpz-data for reading, MTPZ disabled.libmtp version: 1.1.6
Listing raw device(s)
Device 0 (VID=0421 and PID=0661) is a Nokia Nokia Lumia WP8.
Found 1 device(s):
Nokia: Nokia Lumia WP8 (0421:0661) @ bus 1, dev 4
Attempting to connect device(s)
LIBMTP PANIC: Unable to find interface & endpoints of device
Unable to open raw device 0
OK.
Script completed hit RETURN to close window.
-------------------------------------------------------------------------------------
and now the reply of mtpconnect :
-------------------------------------------------------------------------------------
Your system does not appear to have UTF-8 enabled ($LANG="it_IT@euro")
If you want to have support for diacritics and Unicode characters,
please switch your locale to an UTF-8 locale, e.g. "en_US.UTF-8".
Unable to open ~/.mtpz-data for reading, MTPZ disabled.libmtp version: 1.1.6
Device 0 (VID=0421 and PID=0661) is a Nokia Nokia Lumia WP8.
LIBMTP PANIC: Unable to find interface & endpoints of device
No devices.
Script completed hit RETURN to close window.
------------------------------------------------------------------------------------
For gnomad2 :simply report "no jubox found on usb cable"
Seem somethinks it's missing for determinate interface andd endpoind of my smartphone.
Roberto iw2evk
I've instelled your last build but don't work :
see in attachment the reply of mtpdetect :
-------------------------------------------------------------------------------------
Unable to open ~/.mtpz-data for reading, MTPZ disabled.libmtp version: 1.1.6
Listing raw device(s)
Device 0 (VID=0421 and PID=0661) is a Nokia Nokia Lumia WP8.
Found 1 device(s):
Nokia: Nokia Lumia WP8 (0421:0661) @ bus 1, dev 4
Attempting to connect device(s)
LIBMTP PANIC: Unable to find interface & endpoints of device
Unable to open raw device 0
OK.
Script completed hit RETURN to close window.
-------------------------------------------------------------------------------------
and now the reply of mtpconnect :
-------------------------------------------------------------------------------------
Your system does not appear to have UTF-8 enabled ($LANG="it_IT@euro")
If you want to have support for diacritics and Unicode characters,
please switch your locale to an UTF-8 locale, e.g. "en_US.UTF-8".
Unable to open ~/.mtpz-data for reading, MTPZ disabled.libmtp version: 1.1.6
Device 0 (VID=0421 and PID=0661) is a Nokia Nokia Lumia WP8.
LIBMTP PANIC: Unable to find interface & endpoints of device
No devices.
Script completed hit RETURN to close window.
------------------------------------------------------------------------------------
For gnomad2 :simply report "no jubox found on usb cable"
Seem somethinks it's missing for determinate interface andd endpoind of my smartphone.
Roberto iw2evk
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
I just Googled your problem and found this -
https://bugs.launchpad.net/ubuntu/+sour ... ug/1247572
You will see that mtp-detect failed several times, but this guy just kept re-trying.
https://bugs.launchpad.net/ubuntu/+sour ... ug/1247572
You will see that mtp-detect failed several times, but this guy just kept re-trying.
Unforntunly not work for me : i've retried many and many times withoput connections..tempestuous wrote:I just Googled your problem and found this -
https://bugs.launchpad.net/ubuntu/+sour ... ug/1247572
You will see that mtp-detect failed several times, but this guy just kept re-trying.
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
Last chance - libmtp-1.1.6 is from March 2013, so I compiled the very latest development version of libmtp from git,
then repackaged Gnomad2. Now available here -
http://minipc.org/ipup/download/gnomad2 ... an2014.pet
then repackaged Gnomad2. Now available here -
http://minipc.org/ipup/download/gnomad2 ... an2014.pet
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
Yes, that device ID is supported. In /src/music-players.h these are the relevant lines -Ted Dog wrote:04e8:6860 Samsung Electronic Co
Code: Select all
{ "Samsung", 0x04e8,
"Galaxy models (MTP)", 0x6860,
Code: Select all
* These entries seems to be used on a *lot* of Samsung
* Android phones. It is *not* the Android MTP stack but an internal
* Samsung stack. The devices present a few different product IDs
* depending on mode:
*
* 0x685b - UMS
* 0x685c - MTP + ADB
* 0x685e - UMS + CDC
* 0x6860 - MTP mode (default)
* 0x6863 - USB CDC RNDIS (not MTP)
* 0x6865 - PTP mode (not MTP)
* 0x6877 - Kies mode? Does it have MTP?
*
* Used on these samsung devices:
* GT P7310/P7510/N7000/I9100/I9250/I9300
* Galaxy Nexus
* Galaxy Tab 7.7/10.1
* Galaxy S GT-I9000
* Galaxy S Advance GT-I9070
* Galaxy S2
* Galaxy S3
* Galaxy Note
* Galaxy Y
Gnomad2 v2.9.6 + libmtp for MP3 players
Hi All,
failed again
I suppose it's impossible make connection enter puppy and this winshith os..
Roberto
failed again
I suppose it's impossible make connection enter puppy and this winshith os..
Roberto