dmesg gives the following:
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x10c0-0x10c7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x10c8-0x10cf, BIOS settings: hdc:pio, hdd:pio
hda: ST34323A, ATA DISK drive
blk: queue c034b540, I/O limit 4095Mb (mask 0xffffffff)
hdc: QUANTUM SIROCCO1700A, ATA DISK drive
hdd: CRD-8322B, ATAPI CD/DVD-ROM drive
blk: queue c034b994, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 8421840 sectors (4312 MB) w/128KiB Cache, CHS=557/240/63, UDMA(33)
hdc: attached ide-disk driver.
hdc: 3335472 sectors (1708 MB) w/75KiB Cache, CHS=3309/16/63, DMA
Partition check:
hda: [PTBL] [524/255/63] hda1 hda2 < hda5 >
hdc: [PTBL] [827/64/63] hdc1
ide: late registration of driver.
ide: OPL3-SAX Sound Board activate failed
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 7306k freed
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 132k freed
Adding Swap: 208804k swap-space (priority -1)
SCSI subsystem driver Revision: 1.00
Intel 810 + AC97 Audio, version 1.01, 10:55:54 Jun 17 2005
via-rhine.c:v1.10-LK1.1.19 July-12-2003 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
PCI: Enabling device 00:0a.0 (0014 -> 0017)
eth0: VIA VT6102 Rhine-II at 0x1400, 00:05:5d:dc:9c:8d, IRQ 10.
eth0: MII PHY found at address 8, status 0x7829 advertising 01e1 Link 41e1.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 10:58:54 Jun 17 2005
usb-uhci.c: High bandwidth mode enabled
PCI: Enabling device 00:07.2 (0000 -> 0001)
usb-uhci.c: USB UHCI at I/O 0x1060, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hdd: attached ide-cdrom driver.
hdd: ATAPI 32X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
NTFS driver 2.1.6b [Flags: R/W MODULE].
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Uniform CD-ROM driver unloaded
hdd: attached ide-cdrom driver.
hdd: ATAPI 32X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
Uniform CD-ROM driver unloaded
Registering unionfs version $Id: main.c,v 1.85 2005/03/14 22:19:49 dquigley Exp $
hdd: attached ide-cdrom driver.
hdd: ATAPI 32X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
eth0: Setting full-duplex based on MII #8 link partner capability of 41e1.
eth0: Setting full-duplex based on MII #8 link partner capability of 41e1.
i8253 count too high! resetting..
i8253 count too high! resetting..
i8253 count too high! resetting..
i8253 count too high! resetting..
Intel 810 + AC97 Audio, version 1.01, 10:55:54 Jun 17 2005
Intel 810 + AC97 Audio, version 1.01, 10:55:54 Jun 17 2005
Intel 810 + AC97 Audio, version 1.01, 10:55:54 Jun 17 2005
Intel 810 + AC97 Audio, version 1.01, 10:55:54 Jun 17 2005