The time now is Sat 18 May 2013, 14:56
All times are UTC - 4 |
| Author |
Message |
heALer
Joined: 10 Apr 2008
Posts: 3
|
 Posted: Thu 10 Apr 2008, 18:45 Post subject:
 km400 s-video |
|
Hi there.
I'm running Puppy 3.01 and I wonder if anyone here knows how to get the tv out working? I have a KM400 chipset with S-Video out, I have googled for hours and can't find anything good, so I hope someone here knows how to do it 
Right now I haveing 1024x768x16 resolution on my computer monitor that I congifured with xorg, that works fine! But the TV screen is black. Do I need anymore driver or something?
If you want you can look at my xorg.conf here:
| Code: |
Section "Module"
Load "synaptics"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx"
Load "dri"
# This loads xtrap extension, used by xrandr
Load "xtrap"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R7/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/X11R7/lib/X11/fonts/misc/"
FontPath "/usr/X11R7/lib/X11/fonts/Type1/"
FontPath "/usr/X11R7/lib/X11/fonts/TTF/"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Enables mode switching with xrandr
# There is a report that this can cause Xorg not to work on some
# video hardware, so default is commented-out...
# but i want to use it in xorgwizard so leave on...
Option "RandR" "on"
EndSection
#everything past here is auto-generated by Puppy's Xorg Wizard...
Section "ServerLayout"
InputDevice "Synaptics Mouse" "AlwaysCore"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc102"
Option "XkbLayout" "se" #xkeymap0
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto" #mouse0protocol
Option "Device" "/dev/mouse"
#Option "Emulate3Buttons"
#Option "Emulate3Timeout" "50"
Option "ZAxisMapping" "4 5" #scrollwheel
EndSection
Section "InputDevice"
Identifier "Synaptics Mouse"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "0"
Option "HorizScrollDelta" "0"
Option "MinSpeed" "0.10"
Option "MaxSpeed" "0.30"
Option "AccelFactor" "0.0030"
Option "SHMConfig" "on"
#Option "Repeater" "/dev/ps2mouse"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 31.5-48.5
VertRefresh 40-70
#UseModes "Modes0" #monitor0usemodes
EndSection
Section "Modes"
Identifier "Modes0"
#modes0modeline0
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "VBEModes" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "HWCursor" # [<bool>]
#Option "SWCursor" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoRAM" # <i>
#Option "ActiveDevice" # [<str>]
#Option "LCDDualEdge" # [<bool>]
#Option "BusWidth" # [<str>]
#Option "Center" # [<bool>]
#Option "PanelSize" # [<str>]
#Option "ForcePanel" # [<bool>]
#Option "TVDotCrawl" # [<bool>]
#Option "TVDeflicker" # <i>
#Option "TVType" # [<str>]
#Option "TVOutput" # [<str>]
#Option "DisableVQ" # [<bool>]
#Option "DRIXINERAMA" # [<bool>]
#Option "DisableIRQ" # [<bool>]
#Option "EnableAGPDMA" # [<bool>]
#Option "NoAGPFor2D" # [<bool>]
#Option "NoXVDMA" # [<bool>]
#Option "ExaNoComposite" # [<bool>]
Option "ActiveDevice" "LCD,TV" ## can be one, or both
Option "TVType" "PAL" ## or "PAL"
Option "TVOutput" "S-Video" ## or "S-Video"
Identifier "Card0"
Driver "via" #card0driver
VendorName "Unknown Vendor"
BoardName "Unknown Board"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
Subsection "Display"
Depth 16
Modes "1024x768"
EndSubsection
EndSection
#PuppyHardwareProfile=VIA_KN400
|
|
|
Back to top
|
|
 |
heALer
Joined: 10 Apr 2008
Posts: 3
|
| Posted: Fri 11 Apr 2008, 06:00 Post subject:
script |
|
Now it's working!
problem was, I couldn't have both devices active at the same time.
so I made 2 xorg.conf files
xorg.tv
xorg.notv
And then I did a simple script to switch between xorg files
| Code: |
#!/bin/bash
case $1 in
tv ) cp /etc/X11/xorg.tv /etc/X11/xorg.conf ;;
notv ) cp /etc/X11/xorg.notv /etc/X11/xorg.conf ;;
* ) echo
echo "Usage"
echo
echo " tv - use TV"
echo " notv - use LCD"
;;
esac
|
saved it as display
and put it in /usr/local/bin
then I did 2 shortcutscripts on the desktop:
display notv
display tv
then I have to restart X so the changes will take effect.. or CTRL+BACKSPACE
but can I add to the script so the X server will start automatically? So I dont have to press CTRL-BACKSPACE?? I know that sounds very lazy, hehe.. but I just want it to be perfect you know Anyone knows??
|
|
Back to top
|
|
|
heALer
Joined: 10 Apr 2008
Posts: 3
|
| Posted: Fri 11 Apr 2008, 06:47 Post subject:
working |
|
Well, thanks for all help
It was to simple.. just add this line at the end: restartwm
it works like a charm!
|
|
Back to top
|
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
Forum index » Advanced Topics » Hardware » Video
